This patch fixed "Error: trailing whitespace" found by
checkpatch.pl in scripts/kconfig/zconf.lex.c_shipped
Signed-off-by: Masanari Iida <standby24x7@xxxxxxxxx>
---
scripts/kconfig/zconf.lex.c_shipped | 86 ++++++++++++++++++-------------------
1 file changed, 43 insertions(+), 43 deletions(-)
diff --git a/scripts/kconfig/zconf.lex.c_shipped b/scripts/kconfig/zconf.lex.c_shipped
index a0521aa..83c8c5b 100644
--- a/scripts/kconfig/zconf.lex.c_shipped
+++ b/scripts/kconfig/zconf.lex.c_shipped
@@ -52,7 +52,7 @@
#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
/* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
- * if you want the limit (max/min) macros for int types.
+ * if you want the limit (max/min) macros for int types.
*/
#ifndef __STDC_LIMIT_MACROS
#define __STDC_LIMIT_MACROS 1
@@ -69,7 +69,7 @@ typedef uint32_t flex_uint32_t;
typedef signed char flex_int8_t;
typedef short int flex_int16_t;
typedef int flex_int32_t;
-typedef unsigned char flex_uint8_t;
+typedef unsigned char flex_uint8_t;
typedef unsigned short int flex_uint16_t;
typedef unsigned int flex_uint32_t;
#endif /* ! C99 */
@@ -180,7 +180,7 @@ extern FILE *zconfin, *zconfout;
#define EOB_ACT_LAST_MATCH 2
#define YY_LESS_LINENO(n)
-
+
/* Return all but the first "n" matched characters back to the input stream. */
#define yyless(n) \
do \
@@ -242,7 +242,7 @@ struct yy_buffer_state
int yy_bs_lineno; /**< The line count. */
int yy_bs_column; /**< The column count. */
-
+
/* Whether to try to fill the input buffer when we reach the
* end of it.
*/
@@ -891,7 +891,7 @@ extern int zconfwrap (void );
#endif
static void yyunput (int c,char *buf_ptr );
-
+
#ifndef yytext_ptr
static void yy_flex_strncpy (char *,yyconst char *,int );
#endif
@@ -996,7 +996,7 @@ YY_DECL
register yy_state_type yy_current_state;
register char *yy_cp, *yy_bp;
register int yy_act;
-
+
int str = 0;
int ts, i;
@@ -1607,7 +1607,7 @@ static int yy_get_next_buffer (void)
{
register yy_state_type yy_current_state;
register char *yy_cp;
-
+
yy_current_state = (yy_start);
for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp )
@@ -1626,7 +1626,7 @@ static int yy_get_next_buffer (void)
static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state )
{
register int yy_is_jam;
-
+
yy_current_state = yy_nxt[yy_current_state][1];
yy_is_jam = (yy_current_state <= 0);
@@ -1636,7 +1636,7 @@ static int yy_get_next_buffer (void)
static void yyunput (int c, register char * yy_bp )
{
register char *yy_cp;
-
+
yy_cp = (yy_c_buf_p);
/* undo effects of setting up zconftext */
@@ -1679,7 +1679,7 @@ static int yy_get_next_buffer (void)
{
int c;
-
+
*(yy_c_buf_p) = (yy_hold_char);
if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR )
@@ -1746,12 +1746,12 @@ static int yy_get_next_buffer (void)
/** Immediately switch to a different input stream.
* @param input_file A readable stream.
- *
+ *
* @note This function does not reset the start condition to @c INITIAL .
*/
void zconfrestart (FILE * input_file )
{
-
+
if ( ! YY_CURRENT_BUFFER ){
zconfensure_buffer_stack ();
YY_CURRENT_BUFFER_LVALUE =
@@ -1764,11 +1764,11 @@ static int yy_get_next_buffer (void)
/** Switch to a different input buffer.
* @param new_buffer The new input buffer.
- *
+ *
*/
void zconf_switch_to_buffer (YY_BUFFER_STATE new_buffer )
{
-
+
/* TODO. We should be able to replace this entire function body
* with
* zconfpop_buffer_state();
@@ -1808,13 +1808,13 @@ static void zconf_load_buffer_state (void)
/** Allocate and initialize an input buffer state.
* @param file A readable stream.
* @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE.
- *
+ *
* @return the allocated buffer state.
*/
YY_BUFFER_STATE zconf_create_buffer (FILE * file, int size )
{
YY_BUFFER_STATE b;
-
+
b = (YY_BUFFER_STATE) zconfalloc(sizeof( struct yy_buffer_state ) );
if ( ! b )
YY_FATAL_ERROR( "out of dynamic memory in zconf_create_buffer()" );
@@ -1837,11 +1837,11 @@ static void zconf_load_buffer_state (void)
/** Destroy the buffer.
* @param b a buffer created with zconf_create_buffer()
- *
+ *
*/
void zconf_delete_buffer (YY_BUFFER_STATE b )
{
-
+
if ( ! b )
return;
@@ -1862,7 +1862,7 @@ static void zconf_load_buffer_state (void)
{
int oerrno = errno;
-
+
zconf_flush_buffer(b );
b->yy_input_file = file;
@@ -1878,13 +1878,13 @@ static void zconf_load_buffer_state (void)
}
b->yy_is_interactive = 0;
-
+
errno = oerrno;
}
/** Discard all buffered characters. On the next scan, YY_INPUT will be called.
* @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER.
- *
+ *
*/
void zconf_flush_buffer (YY_BUFFER_STATE b )
{
@@ -1913,7 +1913,7 @@ static void zconf_load_buffer_state (void)
* the current state. This function will allocate the stack
* if necessary.
* @param new_buffer The new state.
- *
+ *
*/
void zconfpush_buffer_state (YY_BUFFER_STATE new_buffer )
{
@@ -1943,7 +1943,7 @@ void zconfpush_buffer_state (YY_BUFFER_STATE new_buffer )
/** Removes and deletes the top of the stack, if present.
* The next element becomes the new top.
- *
+ *
*/
void zconfpop_buffer_state (void)
{
@@ -1967,7 +1967,7 @@ void zconfpop_buffer_state (void)
static void zconfensure_buffer_stack (void)
{
int num_to_alloc;
-
+
if (!(yy_buffer_stack)) {
/* First allocation is just for 2 elements, since we don't know if this
@@ -1980,9 +1980,9 @@ static void zconfensure_buffer_stack (void)
);
if ( ! (yy_buffer_stack) )
YY_FATAL_ERROR( "out of dynamic memory in zconfensure_buffer_stack()" );
-
+
memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
-
+
(yy_buffer_stack_max) = num_to_alloc;
(yy_buffer_stack_top) = 0;
return;
@@ -2010,13 +2010,13 @@ static void zconfensure_buffer_stack (void)
/** Setup the input buffer state to scan directly from a user-specified character buffer.
* @param base the character buffer
* @param size the size in bytes of the character buffer
- *
- * @return the newly allocated buffer state object.
+ *
+ * @return the newly allocated buffer state object.
*/
YY_BUFFER_STATE zconf_scan_buffer (char * base, yy_size_t size )
{
YY_BUFFER_STATE b;
-
+
if ( size < 2 ||
base[size-2] != YY_END_OF_BUFFER_CHAR ||
base[size-1] != YY_END_OF_BUFFER_CHAR )
@@ -2045,14 +2045,14 @@ YY_BUFFER_STATE zconf_scan_buffer (char * base, yy_size_t size )
/** Setup the input buffer state to scan a string. The next call to zconflex() will
* scan from a @e copy of @a str.
* @param yystr a NUL-terminated string to scan
- *
+ *
* @return the newly allocated buffer state object.
* @note If you want to scan bytes that may contain NUL values, then use
* zconf_scan_bytes() instead.
*/
YY_BUFFER_STATE zconf_scan_string (yyconst char * yystr )
{
-
+
return zconf_scan_bytes(yystr,strlen(yystr) );
}
@@ -2060,7 +2060,7 @@ YY_BUFFER_STATE zconf_scan_string (yyconst char * yystr )
* scan from a @e copy of @a bytes.
* @param bytes the byte buffer to scan
* @param len the number of bytes in the buffer pointed to by @a bytes.
- *
+ *
* @return the newly allocated buffer state object.
*/
YY_BUFFER_STATE zconf_scan_bytes (yyconst char * yybytes, int _yybytes_len )
@@ -2069,7 +2069,7 @@ YY_BUFFER_STATE zconf_scan_bytes (yyconst char * yybytes, int _yybytes_len )
char *buf;
yy_size_t n;
int i;
-
+
/* Get memory for full buffer, including space for trailing EOB's. */
n = _yybytes_len + 2;
buf = (char *) zconfalloc(n );
@@ -2123,16 +2123,16 @@ static void yy_fatal_error (yyconst char* msg )
/* Accessor methods (get/set functions) to struct members. */
/** Get the current line number.
- *
+ *
*/
int zconfget_lineno (void)
{
-
+
return zconflineno;
}
/** Get the input stream.
- *
+ *
*/
FILE *zconfget_in (void)
{
@@ -2140,7 +2140,7 @@ FILE *zconfget_in (void)
}
/** Get the output stream.
- *
+ *
*/
FILE *zconfget_out (void)
{
@@ -2148,7 +2148,7 @@ FILE *zconfget_out (void)
}
/** Get the length of the current token.
- *
+ *
*/
int zconfget_leng (void)
{
@@ -2156,7 +2156,7 @@ int zconfget_leng (void)
}
/** Get the current token.
- *
+ *
*/
char *zconfget_text (void)
@@ -2166,18 +2166,18 @@ char *zconfget_text (void)
/** Set the current line number.
* @param line_number
- *
+ *
*/
void zconfset_lineno (int line_number )
{
-
+
zconflineno = line_number;
}
/** Set the input stream. This does not discard the current
* input buffer.
* @param in_str A readable stream.
- *
+ *
* @see zconf_switch_to_buffer
*/
void zconfset_in (FILE * in_str )
@@ -2231,7 +2231,7 @@ static int yy_init_globals (void)
/* zconflex_destroy is for both reentrant and non-reentrant scanners. */
int zconflex_destroy (void)
{
-
+
/* Pop the buffer stack, destroying each element. */
while(YY_CURRENT_BUFFER){
zconf_delete_buffer(YY_CURRENT_BUFFER );
--
1.8.5.2.192.g7794a68
--
To unsubscribe from this list: send the line "unsubscribe linux-kbuild" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
