The fixups are executed once the pci-device is found which is during
boot process so __init seems fine as long as the platform does not
support hotplug.
However it is possible to remove the PCI bus at run time and have it
rediscovered again via "echo 1 > /sys/bus/pci/rescan" and this will call
the fixups again.
Cc: Richard Henderson <rth@xxxxxxxxxxx>
Cc: Ivan Kokshaysky <ink@xxxxxxxxxxxxxxxxxxxx>
Cc: Matt Turner <mattst88@xxxxxxxxx>
Signed-off-by: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
---
arch/alpha/kernel/pci.c | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)
diff --git a/arch/alpha/kernel/pci.c b/arch/alpha/kernel/pci.c
index 1a62963..026d49f 100644
--- a/arch/alpha/kernel/pci.c
+++ b/arch/alpha/kernel/pci.c
@@ -59,15 +59,13 @@ struct pci_controller *pci_isa_hose;
* Quirks.
*/
-static void __init
-quirk_isa_bridge(struct pci_dev *dev)
+static void __devinit quirk_isa_bridge(struct pci_dev *dev)
{
dev->class = PCI_CLASS_BRIDGE_ISA << 8;
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82378, quirk_isa_bridge);
-static void __init
-quirk_cypress(struct pci_dev *dev)
+static void __devinit quirk_cypress(struct pci_dev *dev)
{
/* The Notorious Cy82C693 chip. */
@@ -106,8 +104,7 @@ quirk_cypress(struct pci_dev *dev)
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, quirk_cypress);
/* Called for each device after PCI setup is done. */
-static void __init
-pcibios_fixup_final(struct pci_dev *dev)
+static void __devinit pcibios_fixup_final(struct pci_dev *dev)
{
unsigned int class = dev->class >> 8;
--
1.7.10
--
To unsubscribe from this list: send the line "unsubscribe linux-kbuild" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
