Hi Mauro, On Thu, Jul 14, 2011 at 1:26 PM, Arnaud Lacombe <lacombar@xxxxxxxxx> wrote: > Cc: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx> > Cc: Randy Dunlap <rdunlap@xxxxxxxxxxxx> > Signed-off-by: Arnaud Lacombe <lacombar@xxxxxxxxx> > AFAICS, as of -next-20110722, you never grabbed that patch, any specific reason ? Thanks, - Arnaud > --- > drivers/media/radio/Kconfig | 16 ++++++++-------- > 1 files changed, 8 insertions(+), 8 deletions(-) > > diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig > index e4c97fd..9cab04d 100644 > --- a/drivers/media/radio/Kconfig > +++ b/drivers/media/radio/Kconfig > @@ -58,7 +58,7 @@ config RADIO_RTRACK > config RADIO_RTRACK_PORT > hex "RadioTrack i/o port (0x20f or 0x30f)" > depends on RADIO_RTRACK=y > - default "20f" > + default "0x20f" > help > Enter either 0x30f or 0x20f here. The card default is 0x30f, if you > haven't changed the jumper setting on the card. > @@ -81,7 +81,7 @@ config RADIO_RTRACK2 > config RADIO_RTRACK2_PORT > hex "RadioTrack II i/o port (0x20c or 0x30c)" > depends on RADIO_RTRACK2=y > - default "30c" > + default "0x30c" > help > Enter either 0x30c or 0x20c here. The card default is 0x30c, if you > haven't changed the jumper setting on the card. > @@ -104,7 +104,7 @@ config RADIO_AZTECH > config RADIO_AZTECH_PORT > hex "Aztech/Packard Bell I/O port (0x350 or 0x358)" > depends on RADIO_AZTECH=y > - default "350" > + default "0x350" > help > Enter either 0x350 or 0x358 here. The card default is 0x350, if you > haven't changed the setting of jumper JP3 on the card. Removing the > @@ -133,7 +133,7 @@ config RADIO_GEMTEK > config RADIO_GEMTEK_PORT > hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0c24c or 0x28c)" > depends on RADIO_GEMTEK=y > - default "34c" > + default "0x34c" > help > Enter either 0x20c, 0x30c, 0x24c or 0x34c here. The card default is > 0x34c, if you haven't changed the jumper setting on the card. On > @@ -237,7 +237,7 @@ config RADIO_TERRATEC > config RADIO_TERRATEC_PORT > hex "Terratec i/o port (normally 0x590)" > depends on RADIO_TERRATEC=y > - default "590" > + default "0x590" > help > Fill in the I/O port of your TerraTec FM radio card. If unsure, go > with the default. > @@ -255,7 +255,7 @@ config RADIO_TRUST > config RADIO_TRUST_PORT > hex "Trust i/o port (usually 0x350 or 0x358)" > depends on RADIO_TRUST=y > - default "350" > + default "0x350" > help > Enter the I/O port of your Trust FM radio card. If unsure, try the > values "0x350" or "0x358". > @@ -278,7 +278,7 @@ config RADIO_TYPHOON > config RADIO_TYPHOON_PORT > hex "Typhoon I/O port (0x316 or 0x336)" > depends on RADIO_TYPHOON=y > - default "316" > + default "0x316" > help > Enter the I/O port of your Typhoon or EcoRadio radio card. > > @@ -312,7 +312,7 @@ config RADIO_ZOLTRIX > config RADIO_ZOLTRIX_PORT > hex "ZOLTRIX I/O port (0x20c or 0x30c)" > depends on RADIO_ZOLTRIX=y > - default "20c" > + default "0x20c" > help > Enter the I/O port of your Zoltrix radio card. > > -- > 1.7.3.4.574.g608b.dirty > > -- To unsubscribe from this list: send the line "unsubscribe linux-kbuild" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
