On Fri Sep 6, 2024 at 9:09 AM EEST, Stefan Wahren wrote:
> According to TCG PC Client Platform TPM Profile (PTP) Specification
> only SPI mode 0 is supported. In order to ensure the SPI controller
> supports the necessary settings, call spi_setup() and bail out
> as soon as possible in error case.
>
> This change should affect all supported TPM SPI devices, because
> tpm_tis_spi_probe is either called direct or indirectly.
>
> Signed-off-by: Stefan Wahren <wahrenst@xxxxxxx>
> ---
> drivers/char/tpm/tpm_tis_spi_main.c | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/drivers/char/tpm/tpm_tis_spi_main.c b/drivers/char/tpm/tpm_tis_spi_main.c
> index 61b42c83ced8..e62d297b040e 100644
> --- a/drivers/char/tpm/tpm_tis_spi_main.c
> +++ b/drivers/char/tpm/tpm_tis_spi_main.c
> @@ -248,6 +248,17 @@ static int tpm_tis_spi_write_bytes(struct tpm_tis_data *data, u32 addr,
> int tpm_tis_spi_init(struct spi_device *spi, struct tpm_tis_spi_phy *phy,
> int irq, const struct tpm_tis_phy_ops *phy_ops)
> {
> + int ret;
> +
> + spi->mode &= ~SPI_MODE_X_MASK;
> + spi->mode |= SPI_MODE_0;
> +
> + ret = spi_setup(spi);
> + if (ret < 0) {
> + dev_err(&spi->dev, "SPI setup failed: %d\n", ret);
> + return ret;
> + }
> +
> phy->iobuf = devm_kmalloc(&spi->dev, SPI_HDRSIZE + MAX_SPI_FRAMESIZE, GFP_KERNEL);
> if (!phy->iobuf)
> return -ENOMEM;
> --
> 2.34.1
Why?
BR, Jarkko
