From: Roberto Sassu <roberto.sassu@xxxxxxxxxx> Add the documentation of the Integrity Digest Cache in Documentation/security. Signed-off-by: Roberto Sassu <roberto.sassu@xxxxxxxxxx> --- Documentation/security/digest_cache.rst | 814 ++++++++++++++++++++++++ Documentation/security/index.rst | 1 + MAINTAINERS | 2 + 3 files changed, 817 insertions(+) create mode 100644 Documentation/security/digest_cache.rst diff --git a/Documentation/security/digest_cache.rst b/Documentation/security/digest_cache.rst new file mode 100644 index 000000000000..ddc33e672090 --- /dev/null +++ b/Documentation/security/digest_cache.rst @@ -0,0 +1,814 @@ +.. SPDX-License-Identifier: GPL-2.0 + +====================== +Integrity Digest Cache +====================== + +Introduction +============ + +Integrity detection and protection has long been a desirable feature, to +reach a large user base and mitigate the risk of flaws in the software +and attacks. + +However, while solutions exist, they struggle to reach a large user base, +due to requiring higher than desired constraints on performance, +flexibility and configurability, that only security conscious people are +willing to accept. + +For example, IMA measurement requires the target platform to collect +integrity measurements, and to protect them with the TPM, which introduces +a noticeable overhead (up to 10x slower in a microbenchmark) on frequently +used system calls, like the open(). + +IMA Appraisal currently requires individual files to be signed and +verified, and Linux distributions to rebuild all packages to include file +signatures (this approach has been adopted from Fedora 39+). Like a TPM, +also signature verification introduces a significant overhead, especially +if it is used to check the integrity of many files. + +This is where the new Integrity Digest Cache comes into play, it offers +additional support for new and existing integrity solutions, to make +them faster and easier to deploy. + +The Integrity Digest Cache can help IMA to reduce the number of TPM +operations and to make them happen in a deterministic way. If IMA knows +that a file comes from a Linux distribution, it can measure files in a +different way: measure the list of digests coming from the distribution +(e.g. RPM package headers), and subsequently measure a file if it is not +found in that list. + +The performance improvement comes at the cost of IMA not reporting which +files from installed packages were accessed, and in which temporal +sequence. This approach might not be suitable for all use cases. + +The Integrity Digest Cache can also help IMA for appraisal. IMA can simply +lookup the calculated digest of an accessed file in the list of digests +extracted from package headers, after verifying the header signature. It is +sufficient to verify only one signature for all files in the package, as +opposed to verifying a signature for each file. + +The same approach can be followed by other LSMs, such as Integrity Policy +Enforcement (IPE), and BPF LSM. + +The Integrity Digest Cache is not tied to a specific package format. While +it currently supports a TLV-based and the RPM formats, it can be easily +extended to support more formats, such as DEBs. Focusing on just extracting +digests keeps these parsers minimal and reasonably simple (e.g. the RPM +parser has ~220 LOC). Included parsers have been verified for memory safety +with the Frama-C static analyzer. The parsers with the Frama-C assertions +are available here: + +https://github.com/robertosassu/rpm-formal/ + +Integrating the Integrity Digest Cache in IMA brings significant +performance improvements: up to 67% and 79% for measurement respectively in +sequential and parallel file reads; up to 65% and 43% for appraisal +respectively in sequential and parallel file reads. + +The performance can be further enhanced by using fsverity digests instead +of conventional file digests, which would make IMA verify only the portion +of the file to be read. However, at the moment, fsverity digests are not +included in RPM packages. In this case, once rpm is extended to include +them, Linux distributions still have to rebuild their packages. + +The Integrity Digest Cache can support both digest types, so that the +functionality is immediately available without waiting for Linux +distributions to do the transition. + + +Design +====== + +Main idea +--------- + +The Integrity Digest Cache extracts digests from a file, referred to as a +digest list, and stores them in kernel memory in a structure named +digest_cache. + +The digest_cache structure contains a set of per algorithm hash tables, +where digests are stored, the digest list pathname, a reference counter, +and the integrity state of the digest list. + +If a digest cache is created from a directory, its hash tables are empty +and instead it contains a snapshot of the directory entries discovered with +iterate_dir(). + +The integrity state of digest caches created from regular files, also +called verification data, is evaluated independently by LSMs, for example +by verifying the signature of the digest list, and is provided to the +Integrity Digest Cache through a dedicated API. + +The extracted digests can be used as reference values initially for +integrity verification of file data and at a later stage for integrity +verification of file metadata. + +The Integrity Digest Cache can extract digests from a digest list, provided +that it has a parser for its format. + + +Caching and reference counting +------------------------------ + +Creating a digest cache every time it is requested would introduce an +unnecessary overhead, due to repeating the same operation. For this reason, +the Integrity Digest Cache reserves space in the inode security blob +(through IMA) and stores two types of digest cache reference. + +If the digest cache was created from the same inode, the Integrity Digest +Cache stores in the inode security blob a reference called dig_owner, +because the inode owns the content. + +If the digest cache was requested for verifying an inode, the Integrity +Digest Cache stores a reference called dig_user, because the inode is a +user of the digest cache. + +An inode can have both types of reference set, if it is a digest list +to be verified with another digest list. + +Check and assignemt of dig_owner and dig_user is protected respectively +with the dig_owner_mutex and dig_user_mutex mutexes. + +The digest cache reference count tracks how many references have been made +to that digest cache (whether that reference is stored in the inode +security blob, or is returned to a user of the Integrity Digest Cache). + +Only when the reference count reaches zero, i.e. all references have been +released, the digest cache can be freed. + + +Digest cache lifecycle +---------------------- + +Digest cache request +~~~~~~~~~~~~~~~~~~~~ + +The first step in order to query a digest from a digest list is to request +a digest cache, by calling digest_cache_get(). The Integrity Digest Cache +takes care of the digest cache creation and initialization processes, +transparently to the caller. + +The caller passes as argument to digest_cache_get() the inode that the +caller intends to verify. The Integrity Digest Cache first sees if there +is a cached digest cache in that inode (dig_user reference). If there is, +it immediately returns the digest cache with the reference count increased, +since the reference is returned to the caller. + +Otherwise, it will perform the necessary steps (below) to obtain one. + + +Digest list lookup +~~~~~~~~~~~~~~~~~~ + +In order to build a digest cache and return it to the caller for performing +a query, the Integrity Digest Cache must know which digest list to use. +There are a few alternatives. + +(1) There is only one digest list and its path is specified as default +location at build-time in the kernel configuration or at run-time through +securityfs. The Integrity Digest Cache builds a single digest cache from +that digest list and returns it to the caller. + +(2) The default location is a directory containing multiple digest lists. +Unlike (1), the Integrity Digest Cache does not know which digest list to +select, and creates a directory digest cache with a snapshot of the +directory entries. During a query, the Integrity Digest Cache iteratively +creates a digest cache for each directory entry and searches for the digest +until there is a match. + +(3) Same as (2), but the digest list file name is stored as value of the +new security.digest_list xattr in the inode for which the digest cache is +requested. The Integrity Digest Cache can directly retrieve the digest list +using the default directory as the base path and the xattr value as last +path component. + +(4) Similar to (3), but the Integrity Digest Cache still creates a +directory digest cache like in (2). Then, it only reads the digest list if +the directory entry file name does not match the security.digest_list +xattr, to trigger a measurement or, otherwise, creates a digest cache from +the matching one. This is also known as the prefetching mechanism, +introduced later. + + +Digest cache creation +~~~~~~~~~~~~~~~~~~~~~ + +Once the Integrity Digest Cache selected the digest list to use, it looks +up the digest list inode through the VFS, verifies whether in the inode +security blob there is already a digest cache reference (dig_owner). + +If there is, it returns that to digest_cache_get() with the reference count +increased, which in turn will store it in dig_user and will increment the +reference count again before returning to the caller. + +If there isn't, it creates a new digest cache and performs the same steps +as if dig_owner exists. + + +Digest cache initialization +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The digest cache creation does not include initialization and adding the +digests. It cannot be done inside the dig_owner_mutex and dig_user_mutex, +to avoid lock inversion with the inode lock done by the VFS. + +Digest cache initialization is done by digest_cache_get() by +calling digest_cache_init(), after releasing the dig_user_mutex. Any +digest_cache_get() caller can potentially initialize a digest cache. + +To avoid multiple initialization attempts, callers atomically test and set +the INIT_STARTED atomic flag. The first seeing the flag cleared is the one +in charge of the initialization. The other callers wait for another atomic +flag, INIT_IN_PROGRESS to be cleared to zero (it is set to one on digest +cache creation). + +Failures during initialization can be detected by checking the INVALID flag +in the digest cache and, in this case, the digest cache is not returned to +the caller of digest_cache_get(). + + +Digest list naming convention +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +The digest_cache_get() caller performing the digest cache initialization +reads the digest list and calls the appropriate parser to extract the +digests, based on the file name prefix. + +The expected digest list file name format is:: + + <digest list format>-<file name> + +where format can be for example ``tlv`` or ``rpm``, which make the +Integrity Digest Cache call respectively the TLV or RPM parser. + +Alternatively, also the following format is supported:: + + <seq num>-<digest list format>-<file name> + +``<seq num>-`` defines how directory entries should be ordered in the +directory digest cache. If present, directory entries are ordered in +ascending way by that number. + + +Digest list parsing +^^^^^^^^^^^^^^^^^^^ + +The selected digest list parser first calls digest_cache_htable_init() to +create the hash tables in the digest cache, once for each hash algorithm +of the digests to be added. digest_cache_htable_init() accepts as parameter +the number of digests to add, usually known before adding digests. + +The number of hash table slots is determined by dividing the number of +digests to add by the desired average collision depth. The latter can be +changed in the kernel configuration, to have a different tradeoff between +digest lookup speed and memory occupation. + +The parser then calls digest_cache_htable_add(), to add extracted digests +to the new hash tables. It can also call digest_cache_htable_lookup() to +check for duplicate digests. + +Directory digest cache +^^^^^^^^^^^^^^^^^^^^^^ + +If the digest list location is a directory, digest_cache_init() calls +digest_cache_dir_add_entries(), which in turn calls iterate_dir() to +get the current directory entries and to add them to a linked list. + +When a digest is looked up on a directory digest cache, +digest_cache_dir_lookup_digest() will create a regular digest cache for +each directory entry and will lookup into it until it finds the digest. + +digest_cache_dir_lookup_digest() also gets a digest cache reference for +each directory entry, so that digest lookup is faster at the next call. + + +Digest lookup +~~~~~~~~~~~~~ + +After a caller of digest_cache_get() obtains the desired digest cache, it +can perform operations on it. The most important operation is querying for +a digest, which can be performed by calling digest_cache_lookup(). + +digest_cache_lookup() returns a numeric reference (uintptr_t type), +representing the digest cache containing the queried digest. It is not a +pointer, to avoid it being accidentally passed to digest_cache_put(). + +If digest_cache_get() returned a directory digest cache, +digest_cache_lookup() cannot directly perform the search, since its hash +tables are empty. Instead, it calls digest_cache_dir_lookup_digest(), +which searches the digest in the digest cache of each directory entry. + +digest_cache_dir_lookup_digest(), if it finds a digest in a directory +digest cache, it calls digest_cache_dir_update_dig_user() to update +dig_user of the inode, whose digest is queried, with the digest cache +containing the digest. This ensures that next time digest_cache_get() is +called for the same inode, the digest is searched in the right digest +cache, instead of repeating the search in each directory entry. + + +Verification data +~~~~~~~~~~~~~~~~~ + +Until now, the caller of the Integrity Digest Cache is assumed to always +trust the returned digest cache from being created from authentic data. Or, +there are security measures in place but not able to correlate reading a +digest list with building a digest cache from it. + +The Integrity Digest Cache introduces a new mechanism for integrity +providers to store verification data, i.e. their evaluation result of a +digest list. It also allows callers of digest_cache_get() to later retrieve +that information and decide whether or not they should use that digest +cache. + +It achieves that by reserving space in the file descriptor security blob, +and by setting the digest cache pointer in the digest list file descriptor +before the digest list is read by the kernel. + +Integrity providers should implement the kernel_post_read_file LSM hook and +call digest_cache_verif_set(), passing the same digest list file descriptor +on which the digest cache pointer was set, their unique ID and their +evaluation result of the digest list. + +The Integrity Digest Cache supports multiple integrity providers at the +same time, since multiple LSMs can implement the kernel_post_read_file LSM +hook. Each provider is expected to choose an unique ID, so that the +verification data can be given back through the same ID. + +Callers of digest_cache_get() can call digest_cache_verif_get() to get +the verification data, passing the returned digest cache pointer and the +desired integrity provider ID. However, if the digest cache returned was +created from a directory, that call results in a NULL pointer, since the +directory digest cache is not populated from any digest list. + +In that case, those callers have to call digest_cache_lookup() to get the +numeric reference of the digest cache containing the digest (thus populated +from a digest list), and pass it to digest_cache_verif_get() after casting +the value to a digest cache pointer. + + +Tracking digest cache changes +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +After a digest cache has been built and its pointer has been set in the +inode security blob, it might happen that there are changes in the digest +lists, in the default directory and in the value of the +security.digest_list xattr. + +All these changes may influence which digest cache is returned to callers +of digest_cache_get() and which digests in the digest cache might be +searched. + +The Integrity Digest Cache monitors such changes by registering to multiple +LSM hooks (path_truncate, file_release, inode_unlink, inode_rename, +inode_post_setxattr and inode_post_removexattr). Except for the last two, +it accesses the dig_owner pointer in the affected inode security blob, sets +the RESET bit, puts the digest cache and clears dig_owner itself. + +The next time that digest cache is requested with digest_cache_get(), also +dig_user is put and cleared. The same happens in +digest_cache_dir_lookup_digest(), where the digest cache of a directory +entry is released and cleared as well. After a reset, a new digest cache is +created and returned, as if there wasn't one in the first place. + +For the last two hooks, when the security.digest_list xattr is modified, +dig_user is cleared so that at the next digest_cache_get() call a new +digest cache is retrieved, since the location of the digest list might have +changed. + +Nothing changes for previous callers of digest_cache_get(), since they +still hold the old digest cache pointer, despite that has been replaced in +the inode security blobs. The old digest cache pointer will be still valid +until the callers decide to release that digest cache. + + +Security decision update after digest cache changes +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +While new calls to digest_cache_get() result in a new digest cache to be +returned, resetting the previous digest cache does not reflect in a reset +of possibly cached security decisions by users of the Integrity Digest +Cache. + +One possible way for those users to become aware of a digest cache change +is to store the digest cache pointer they used for a security decision, to +call digest_cache_get() again during a new file access and to compare the +two pointers. The previous pointer remains valid until the digest cache +is released. + +IMA stores the current digest cache pointer in its managed metadata. At +every file access, it calls digest_cache_get() again and compares the +returned pointer with the one previously stored. If the pointers are the +same, IMA continues to use the previous evaluation result. If not, it +performs the evaluation again. + +The cost of this check is very small. In the case where the digest cache +didn't change since the last digest_cache_get(), the cost is to check if +the dig_user pointer is not NULL, and to increment and decrement the digest +cache reference count. + +In terms of memory, this solution requires IMA to store an additional +pointer in its metadata. + + +Prefetching mechanism +~~~~~~~~~~~~~~~~~~~~~ + +One of the objectives of the Integrity Digest Cache is to make a TPM PCR +predictable, by having digest lists measured in a deterministic order. +Without the prefetching mechanism, digest lists are measured in a +non-deterministic order, since the inodes for which a digest cache can be +requested are accessed in a non-deterministic order too. + +The prefetching mechanism, when enabled by setting the new +security.dig_prefetch xattr to 1, forces digest lists to be looked up by +their file name in the digest cache created for the parent directory. + +The predictability of the PCR is ensured by reading both matching and +non-matching digest lists during the search, so that integrity providers +can measure them, and by only creating a digest cache for the matching one. +In this way, it does not matter if a digest list later in the list of +directory entries is requested before a earlier one, since all digest lists +until that point are measured anyway. + +However, while this mechanism ensures predictability of the PCR, it could +also introduce significant latencies, especially if the matching digest +list is very late in the list of directory entries. Before a digest cache +is returned from that digest list, hundreds or thousands of digest lists +could have to be read first. + +Then, the ``[<seq num>-]`` prefix in the digest list file name comes at +hand, since it determines the order of directory entries in the directory +digest cache (entries with lower seq nums are before entries with higher +seq nums). Digest lists without that prefix are added at the end of the +directory entries list, in the same order as iterate_dir() shows them. + +Boot performance can be greatly improved by looking at the IMA measurement +list and by seeing in which order digest lists are requested at boot. Then, +``[<seq num>-]`` can be appended to directory entries depending on their +position in the measurement list. + +While digest lists can be requested in a slightly different order due to +the non-deterministic access to inodes, the differences should be minimal, +causing only fewer extra digest lists to be read before the right one is +found. + +Ordering directory entries can also improve digest queries requiring +iteration on all digest lists in the default directory. If directory +entries are ordered by their appearance in the IMA measurement list, a +digest is found faster because most likely it is searched in the same +order as when the IMA measurement list was recorded, and thus its +digest list comes earlier than the others in the list of the directory +entries of the directory digest cache. + + +Release a digest cache +~~~~~~~~~~~~~~~~~~~~~~ + +The Integrity Digest Cache uses the reference count mechanism to ensure +that a digest cache does not simply disappear when someone is using it. + +Either when an inode is evicted from memory, or a caller of +digest_cache_get() finished to use a digest cache, they should call +digest_cache_put() to signal to the Integrity Digest Cache that they are no +longer interested in that digest cache and that it can be eventually freed. + +A digest cache is freed when all digest cache users called +digest_cache_put(), and the reference count reached the value zero. + + +Formal verification of concurrency +================================== + +The Integrity Digest Cache has been designed to work in a heavily concurrent +environment, where code can be executed as a follow up of a VFS operation, +or upon a direct request by a user of the Integrity Digest Cache. + +For this reason, a sound locking mechanism is necessary to protect data +structures against concurrent accesses. + +The first verification of the locking mechanism was done with the in-kernel +lockdep, which can detect potential deadlocks and unsafe usage of the +locking primitives. + +There is an ongoing verification with a tool named Dartagnan, reachable at +the following URL: + +https://github.com/hernanponcedeleon/Dat3M + +This verification required porting the Integrity Digest Cache to user +space, and to simulate concurrent requests through the pthread library. + +Dartagnan explores all thread interleavings and checks for data races. In +addition to lockdep, it can also spot for example improperly guarded +variables. + + +Data structures and API +======================= + +Data structures +--------------- + +These are the data structures defined and used internally by the +Integrity Digest Cache. + +.. kernel-doc:: security/integrity/digest_cache/internal.h + + +Public API +---------- + +This API is meant to be used by users of the Integrity Digest Cache. + +.. kernel-doc:: security/integrity/digest_cache/main.c + :identifiers: digest_cache_get digest_cache_put + +.. kernel-doc:: security/integrity/digest_cache/htable.c + :identifiers: digest_cache_lookup + +.. kernel-doc:: security/integrity/digest_cache/verif.c + :identifiers: digest_cache_verif_set digest_cache_verif_get + + +Parser API +---------- + +This API is meant to be used by digest list parsers. + +.. kernel-doc:: security/integrity/digest_cache/htable.c + :identifiers: digest_cache_htable_init + digest_cache_htable_add + digest_cache_htable_lookup + + +Digest list formats +=================== + +tlv +--- + +The Type-Length-Value (TLV) format was chosen for its extensibility. +Additional fields can be added without breaking compatibility with old +versions of the parser. + +The layout of a tlv digest list is the following:: + + [header: DIGEST_LIST_FILE, num fields, total len] + [field: DIGEST_LIST_ALGO, length, value] + [field: DIGEST_LIST_ENTRY#1, length, value (below)] + |- [header: DIGEST_LIST_ENTRY_DATA, num fields, total len] + |- [DIGEST_LIST_ENTRY_DIGEST#1, length, file digest] + |- [DIGEST_LIST_ENTRY_PATH#1, length, file path] + [field: DIGEST_LIST_ENTRY#N, length, value (below)] + |- [header: DIGEST_LIST_ENTRY_DATA, num fields, total len] + |- [DIGEST_LIST_ENTRY_DIGEST#N, length, file digest] + |- [DIGEST_LIST_ENTRY_PATH#N, length, file path] + +DIGEST_LIST_ALGO is a field to specify the algorithm of the file digest. +DIGEST_LIST_ENTRY is a nested TLV structure with the following fields: +DIGEST_LIST_ENTRY_DIGEST contains the file digest; DIGEST_LIST_ENTRY_PATH +contains the file path. + + +rpm +--- + +The rpm digest list is basically a subset of the RPM package header. +Its format is:: + + [RPM magic number] + [RPMTAG_IMMUTABLE] + +RPMTAG_IMMUTABLE is a section of the full RPM header containing the part +of the header that was signed, and whose signature is stored in the +RPMTAG_RSAHEADER section. + + +Appended signature +------------------ + +Digest lists can have a module-style appended signature, that can be used +for appraisal with IMA. The signature type can be PKCS#7, as for kernel +modules, or a different type. + + +History +======= + +The original name of this work was IMA Digest Lists, which was somehow +considered too invasive. The code was moved to a separate component named +DIGLIM (DIGest Lists Integrity Module), with the purpose of removing the +complexity away of IMA, and also adding the possibility of using it with +other kernel components (e.g. Integrity Policy Enforcement, or IPE). + +The design changed significantly, so DIGLIM was renamed to Integrity Digest +Cache, as the name better reflects what the new component does. + +Since it was originally proposed, in 2017, this work grew up a lot thanks +to various comments/suggestions. It became integrally part of the openEuler +distribution since end of 2020. + +The most important difference between the old the current version is moving +from a centralized repository of file digests to a per-package repository. +This reduces the digest lookup time, since digests are searched in smaller +hash tables, and significantly reduces the memory pressure, since +digest lists are loaded into kernel memory only when they are actually +needed, and removed during reclamation. + + +Performance +=========== + +System specification +-------------------- + +The tests have been performed on a Fedora 38 virtual machine with 4 cores +(AMD EPYC-Rome, no hyperthreading), 16 GB of RAM, no TPM/TPM passthrough/ +emulated. The QEMU process has been pinned to 4 real CPU cores and its +priority was set to -20. + + +Benchmark tool +-------------- + +The Integrity Digest Cache has been tested with an ad-hoc benchmark tool +that creates 20000 files with a random size up to 100 bytes and randomly +adds their digest to one of 303 digest lists. The number of digest lists +has been derived from the ratio (66) digests/packages (124174/1883) found +in the testing virtual machine (hence, 20000/66 = 303). IMA signatures have +been done with ECDSA NIST P-384. + +The benchmark tool then creates a list of 20000 files to be accessed, +randomly chosen (there can be duplicates). This is necessary to make the +results reproducible across reboots (by always replaying the same +operations). The benchmark reads (sequentially and in parallel) the files +from the list 2 times, flushing the kernel caches before each read. + +Each test has been performed 5 times, and the average value is taken. + + +Purpose of the benchmark +------------------------ + +The purpose of the benchmark is to show the performance difference of IMA +between the current behavior, and by using the Integrity Digest Cache. + + +IMA measurement policy: no cache +-------------------------------- + +.. code-block:: bash + + measure func=FILE_CHECK fowner=2001 pcr=12 + + +IMA measurement policy: cache +----------------------------- + +.. code-block:: bash + + measure func=DIGEST_LIST_CHECK pcr=12 + measure func=FILE_CHECK fowner=2001 digest_cache=data pcr=12 + + +IMA measurement results +----------------------- + +Sequential +~~~~~~~~~~ + +This test was performed reading files sequentially, and waiting for the +current read to terminate before beginning a new one. + +:: + + +-------+------------------------+-----------+ + | meas. | time no/p/vTPM (sec.) | slab (KB) | + +--------------------+-------+------------------------+-----------+ + | no cache | 12313 | 31.71 / 102.80 / 46.29 | 86802 | + +--------------------+-------+------------------------+-----------+ + | cache, no prefetch | 304 | 32.21 / 34.28 / 32.47 | 83709 | + +--------------------+-------+------------------------+-----------+ + | cache, prefetch | 304 | 32.67 / 34.47 / 32.67 | 83720 | + +--------------------+-------+------------------------+-----------+ + +The table shows that 12313 measurements (boot_aggregate + files) have been +made without the digest cache, and 304 with the digest cache +(boot_aggregate + digest lists). Consequently, the memory occupation +without the cache is higher due to the higher number of measurements. + +Not surprisingly, for the same reason, also the test time is significantly +higher without the digest cache when the physical or virtual TPM is used. + +In terms of pure performance, first number in the third column, it can be +seen that there are not significant performance differences between using +or not using the digest cache. + +Prefetching adds little overhead, because digest lists were ordered +according to their appearance in the IMA measurement list (which minimize +the digest lists to prefetch). + + +Parallel +~~~~~~~~ + +This test was performed reading files in parallel, not waiting for the +current read to terminate. + +:: + + +-------+-----------------------+-----------+ + | meas. | time no/p/vTPM (sec.) | slab (KB) | + +--------------------+-------+-----------------------+-----------+ + | no cache | 12313 | 15.84 / 79.26 / 23.43 | 87635 | + +--------------------+-------+-----------------------+-----------+ + | cache, no prefetch | 304 | 15.97 / 16.64 / 16.09 | 89890 | + +--------------------+-------+-----------------------+-----------+ + | cache, prefetch | 304 | 16.18 / 16.84 / 16.24 | 85738 | + +--------------------+-------+-----------------------+-----------+ + +Also in this case, the physical TPM causes the biggest delay especially +without digest cache, where a higher number of measurements need to be +extended in the TPM. + +The Integrity Digest Cache does not introduce a noticeable overhead in all +scenarios. + + +IMA appraisal policy: no cache +------------------------------ + +.. code-block:: bash + + appraise func=FILE_CHECK fowner=2001 + + +IMA appraisal policy: cache +--------------------------- + +.. code-block:: bash + + appraise func=DIGEST_LIST_CHECK + appraise func=FILE_CHECK fowner=2001 digest_cache=data + + +IMA appraisal results +--------------------- + +Sequential +~~~~~~~~~~ + +This test was performed reading files sequentially, and waiting for the +current read to terminate before beginning a new one. + +:: + + +-------------+-------------+-----------+ + | files | time (sec.) | slab (KB) | + +----------------------------+-------------+-------------+-----------+ + | appraise (ECDSA sig) | 12312 | 98.10 | 80842 | + +----------------------------+-------------+-------------+-----------+ + | appraise (cache) | 12312 + 303 | 34.09 | 83138 | + +----------------------------+-------------+-------------+-----------+ + | appraise (cache, prefetch) | 12312 + 303 | 34.08 | 83410 | + +----------------------------+-------------+-------------+-----------+ + +This test shows a huge performance difference from verifying the signature +of 12312 files as opposed to just verifying the signature of 303 digest +lists, and looking up the digest of the files being read. + +There are some differences in terms of memory occupation, which is quite +expected due to the fact that we have to take into account the digest +caches loaded in memory, while with the standard appraisal they don't +exist. + + +Parallel +~~~~~~~~ + +This test was performed reading files in parallel, not waiting for the +current read to terminate. + +:: + + +-------------+-------------+-----------+ + | files | time (sec.) | slab (KB) | + +----------------------------+-------------+-------------+-----------+ + | appraise (ECDSA sig) | 12312 | 29.00 | 82255 | + +----------------------------+-------------+-------------+-----------+ + | appraise (cache) | 12313 + 303 | 16.51 | 88359 | + +----------------------------+-------------+-------------+-----------+ + | appraise (cache, prefetch) | 12313 + 303 | 17.08 | 86266 | + +----------------------------+-------------+-------------+-----------+ + +The difference is less marked when performing the read in parallel. Also, +more memory seems to be occupied in the non-prefetch case. + + +How to test +=========== + +Please follow the instructions here: + +https://github.com/linux-integrity/digest-cache-tools diff --git a/Documentation/security/index.rst b/Documentation/security/index.rst index 59f8fc106cb0..34933e13c509 100644 --- a/Documentation/security/index.rst +++ b/Documentation/security/index.rst @@ -19,3 +19,4 @@ Security Documentation digsig landlock secrets/index + digest_cache diff --git a/MAINTAINERS b/MAINTAINERS index ba8d5c137bef..3b212c747652 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11115,8 +11115,10 @@ R: Eric Snowberg <eric.snowberg@xxxxxxxxxx> L: linux-integrity@xxxxxxxxxxxxxxx S: Supported T: git git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity.git +F: Documentation/security/digest_cache.rst F: security/integrity/ F: security/integrity/ima/ +F: tools/testing/selftests/digest_cache/ INTEL 810/815 FRAMEBUFFER DRIVER M: Antonino Daplas <adaplas@xxxxxxxxx> -- 2.34.1
