Re: [PATCH] tpm: Add new device/vendor ID 0x50666666

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I wanted to check the status of this review. Is there something I did
incorrectly?

-Jett

On Mon, Jun 10, 2024 at 1:25 PM Jett Rink <jettrink@xxxxxxxxxxxx> wrote:
>
> Accept another DID:VID for the next generation Google TPM. This TPM
> has the same Ti50 firmware and fulfills the same interface.
>
> Signed-off-by: Jett Rink <jettrink@xxxxxxxxxxxx>
> ---
>
>  drivers/char/tpm/tpm_tis_i2c_cr50.c | 11 ++++++++---
>  1 file changed, 8 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/char/tpm/tpm_tis_i2c_cr50.c b/drivers/char/tpm/tpm_tis_i2c_cr50.c
> index 86c9a1a43adb..d9b6abdcda5f 100644
> --- a/drivers/char/tpm/tpm_tis_i2c_cr50.c
> +++ b/drivers/char/tpm/tpm_tis_i2c_cr50.c
> @@ -32,7 +32,8 @@
>  #define TPM_CR50_TIMEOUT_SHORT_MS      2               /* Short timeout during transactions */
>  #define TPM_CR50_TIMEOUT_NOIRQ_MS      20              /* Timeout for TPM ready without IRQ */
>  #define TPM_CR50_I2C_DID_VID           0x00281ae0L     /* Device and vendor ID reg value */
> -#define TPM_TI50_I2C_DID_VID           0x504a6666L     /* Device and vendor ID reg value */
> +#define TPM_TI50_DT_I2C_DID_VID                0x504a6666L     /* Device and vendor ID reg value */
> +#define TPM_TI50_OT_I2C_DID_VID                0x50666666L     /* Device and vendor ID reg value */
>  #define TPM_CR50_I2C_MAX_RETRIES       3               /* Max retries due to I2C errors */
>  #define TPM_CR50_I2C_RETRY_DELAY_LO    55              /* Min usecs between retries on I2C */
>  #define TPM_CR50_I2C_RETRY_DELAY_HI    65              /* Max usecs between retries on I2C */
> @@ -781,13 +782,17 @@ static int tpm_cr50_i2c_probe(struct i2c_client *client)
>         }
>
>         vendor = le32_to_cpup((__le32 *)buf);
> -       if (vendor != TPM_CR50_I2C_DID_VID && vendor != TPM_TI50_I2C_DID_VID) {
> +       if (vendor != TPM_CR50_I2C_DID_VID &&
> +           vendor != TPM_TI50_DT_I2C_DID_VID &&
> +           vendor != TPM_TI50_OT_I2C_DID_VID) {
>                 dev_err(dev, "Vendor ID did not match! ID was %08x\n", vendor);
>                 return -ENODEV;
>         }
>
>         dev_info(dev, "%s TPM 2.0 (i2c 0x%02x irq %d id 0x%x)\n",
> -                vendor == TPM_TI50_I2C_DID_VID ? "ti50" : "cr50",
> +                vendor == TPM_CR50_I2C_DID_VID    ? "cr50" :
> +                vendor == TPM_TI50_DT_I2C_DID_VID ? "ti50 DT" :
> +                                                    "ti50 OT",
>                  client->addr, client->irq, vendor >> 16);
>         return tpm_chip_register(chip);
>  }
> --
> 2.45.2.505.gda0bf45e8d-goog
>





[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux Kernel]     [Linux Kernel Hardening]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux SCSI]

  Powered by Linux