On Wed May 22, 2024 at 4:17 PM EEST, Vitor Soares wrote:
> > 1. What is the aarch64 platform you are using?
>
> I was testing this on the Toradex Verdin iMX8MM SoM.
>
> > 2. What kind of TPM you are using and how is it connect?
>
> TPM device is the ATTPM20P connect through the SPI at speed of 36 MHz.
> The bus is shared with a CAN controller (MCP251xFD), so both mues work together.
>
> The dts looks like:
> tpm1: tpm@1 {
> compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
> interrupts-extended = <&gpio1 7 IRQ_TYPE_LEVEL_LOW>;
> pinctrl-0 = <&pinctrl_can2_int>;
> pinctrl-names = "default";
> reg = <1>;
> spi-max-frequency = <36000000>;
> };
Thank you, this exactly what I was looking for. Don't expect any
improvement to the situation before rc1 is out. It is better to
investigate the situation a bit first.
E.g. some people test with fTPM TEE so this was pretty essential
to know that it is a chip going through.
For tpm_crb we should actually disable HMAC at some point. It is
essentially a performance regression for it.
BR, Jarkko
