Hi, On Mon, Apr 22, 2024 at 04:54:26PM +0300, Ilias Apalodimas wrote: > Hi James > > On Mon, 22 Apr 2024 at 16:38, James Bottomley > <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx> wrote: > > > > On Mon, 2024-04-22 at 16:32 +0300, Ilias Apalodimas wrote: > > > Hi all, > > > > > > On Mon, 22 Apr 2024 at 16:08, Mikko Rapeli <mikko.rapeli@xxxxxxxxxx> > > > wrote: > > > > > > > > Hi, > > > > > > > > On Mon, Apr 22, 2024 at 08:42:41AM -0400, James Bottomley wrote: > > > > > On Mon, 2024-04-22 at 14:27 +0300, Mikko Rapeli wrote: > > > > > > Userspace needs to know if TPM kernel drivers need to be loaded > > > > > > and related services started early in the boot if TPM device > > > > > > is used and available. > > > > > > > > > > This says what but not why. We already have module autoloading > > > > > that works correctly for TPM devices, so why is this needed? > > > > > > > > > > We do have a chicken and egg problem with IMA in that the TPM > > > > > driver needs to be present *before* any filesystem, including the > > > > > one the TPM modules would be on, is mounted so executions can be > > > > > measured into IMA (meaning that if you use IMA the TPM drivers > > > > > must be built in) but this sounds to be something different. > > > > > However, because of the IMA problem, most distributions don't end > > > > > up compiling TPM drivers as modules anyway. > > > > > > > > > > Is what you want simply that tpm modules be loaded earlier? > > > > > > > > Yes, ealier is the problem. In my specific testing case the machine > > > > is qemu arm64 with swtpm with EFI firmware for secure boot and TPM > > > > support. > > > > > > > > Firmware uses TPM and does measurements and thus TPM event log is > > > > available on this machine and a bunch of other arm64 boards. > > > > Visible in early boot dmesg as TPMEventLog lines like: > > > > > > > > [ 0.000000] efi: ESRT=0xf0ea5040 TPMFinalLog=0xf0ea9040 > > > > RTPROP=0xf0ea7040 SMBIOS=0xf0ea3000 TPMEventLog=0xeb3b3040 > > > > INITRD=0xeb3b2040 RNG=0xe5c0f040 MEMRESERVE=0xe5c0e040 > > > > > > > > Different boards use different TPM HW and drivers so compiling all > > > > these in is possible but a bit ugly. systemd recently gained > > > > support for a specific tpm2.target which makes TPM support modular > > > > and also works with kernel modules for some TPM use cases but not > > > > rootfs encryption. > > > > > > > > In my test case we have a kernel+initramfs uki binary which is > > > > loaded by EFI firmware as a secure boot binary. TPM support on > > > > various boards is visible in devicetree but not as ACPI table > > > > entries. systemd currently detect TPM2 support either via ACPI > > > > table /sys/firmware/acpi/tables/TPM2 or TPM entry or via firmware > > > > measurement via /sys/kernel/security/tpm0/binary_bios_measurements > > > > . > > > > > > One corner case worth noting here is that scanning the device tree > > > won't always work for non-ACPI systems... The reason is that a > > > firmware TPM (running in OP-TEE) might or might not have a DT entry, > > > since OP-TEE can discover the device dynamically and doesn't always > > > rely on a DT entry. > > > > > > I don't particularly love the idea that an EventLog existence > > > automatically means a TPM will be there, but it seems that systemd > > > already relies on that and it does solve the problem we have. > > > > Well, quite. That's why the question I was interested in, perhaps not > > asked as clearly as it could be is: since all the TPM devices rely on > > discovery mechanisms like ACPI or DT or the like which are ready quite > > early, should we simply be auto loading the TPM drivers earlier? > > This would be an elegant way to solve this and on top of that, we have > a single discovery mechanism from userspace -- e.g ls /dev/tpmX. > But to answer that we need more feedback from systemd. What 'earlier' > means? Autload it from the kernel before we go into launching the > initrd? This is sort of what already happens, but the question is when does init/systemd wait for the TPM device discovery and setup of related service so that rootfs can be mounted? Currently the answer is, for device auto discover: when ACPI TPM2 table exists or TPM kernel driver interface for firmware measurement is available. Or as policy, when the kernel command line includes something or services in initramfs are hard coded. Parsing devicetree is really hard in userspace but it may contain the TPM details. But the TPM can also be on some other discoverable bus, firmware TPM optee trusted application. These both get discovered via the TPM Event Log if firmware has TPM support on the arm64 boards we have. Cheers, -Mikko
