Re: [PATCH] tpm: make locality handling resilient

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 1/19/24 16:28, Jarkko Sakkinen wrote:
On Mon Jan 15, 2024 at 1:15 AM UTC, Daniel P. Smith wrote:
Commit 933bfc5ad213 introduced the use of a locality counter to control when
locality request was actually sent to the TPM. This locality counter created a
hard enforcement that the TPM had no active locality at the time of the driver
initialization. The reality is that this may not always be the case coupled
with the fact that the commit indiscriminately decremented the counter created
the condition for integer underflow of the counter. The underflow was triggered
by the first pair of request/relinquish calls made in tpm_tis_init_core and all
subsequent calls to request/relinquished calls would have the counter flipping
between the underflow value and 0. The result is that it appeared all calls to
request/relinquish were successful, but they were not. The end result is that
the locality that was active when the driver loaded would always remain active,
to include after the driver shutdown. This creates a significant issue when
using Intel TXT and Locality 2 is active at boot. After the GETSEC[SEXIT]
instruction is called, the PCH will close access to Locality 2 MMIO address
space, leaving the TPM locked in Locality 2 with no means to relinquish the
locality until system reset.

The commit seeks to address this situation through three changes. The first is
to walk the localities during initialization and close any open localities to
ensure the TPM is in the assumed state. Next is to put guards around the
counter and the requested locality to ensure they remain within valid values.
The last change is to make the request locality functions be consistent in
their return values. The functions will either return the locality requested if
successful or a negative error code.

Signed-off-by: Daniel P. Smith <dpsmith@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Ross Philipson <ross.philipson@xxxxxxxxxx>
Reported-by: Kanth Ghatraju <kanth.ghatraju@xxxxxxxxxx>
Fixes: 933bfc5ad213 ("tpm, tpm: Implement usage counter for locality")
---
  drivers/char/tpm/tpm-chip.c     |  2 +-
  drivers/char/tpm/tpm_tis_core.c | 20 +++++++++++++++-----
  include/linux/tpm.h             |  2 ++
  3 files changed, 18 insertions(+), 6 deletions(-)

diff --git a/drivers/char/tpm/tpm-chip.c b/drivers/char/tpm/tpm-chip.c
index 42b1062e33cd..e7293f85335a 100644
--- a/drivers/char/tpm/tpm-chip.c
+++ b/drivers/char/tpm/tpm-chip.c
@@ -49,7 +49,7 @@ static int tpm_request_locality(struct tpm_chip *chip)
  		return rc;
chip->locality = rc;
-	return 0;
+	return chip->locality;
  }
static void tpm_relinquish_locality(struct tpm_chip *chip)
diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
index 1b350412d8a6..c8b9b0b199dc 100644
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -180,7 +180,8 @@ static int tpm_tis_relinquish_locality(struct tpm_chip *chip, int l)
  	struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
mutex_lock(&priv->locality_count_mutex);
-	priv->locality_count--;
+	if (priv->locality_count > 0)
+		priv->locality_count--;
  	if (priv->locality_count == 0)
  		__tpm_tis_relinquish_locality(priv, l);
  	mutex_unlock(&priv->locality_count_mutex);
@@ -226,18 +227,21 @@ static int __tpm_tis_request_locality(struct tpm_chip *chip, int l)
  			tpm_msleep(TPM_TIMEOUT);
  		} while (time_before(jiffies, stop));
  	}
-	return -1;
+	return -EBUSY;
  }
static int tpm_tis_request_locality(struct tpm_chip *chip, int l)
  {
  	struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
-	int ret = 0;
+	int ret = -EIO;
+
+	if (l > TPM_MAX_LOCALITY)
+		return -EINVAL;
mutex_lock(&priv->locality_count_mutex);
  	if (priv->locality_count == 0)
  		ret = __tpm_tis_request_locality(chip, l);
-	if (!ret)
+	if (ret >= 0)
  		priv->locality_count++;
  	mutex_unlock(&priv->locality_count_mutex);
  	return ret;
@@ -1108,7 +1112,7 @@ int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
  	u32 intmask;
  	u32 clkrun_val;
  	u8 rid;
-	int rc, probe;
+	int rc, probe, locality;

s/locality/i/

We don't use long names for loop indices generally.

No problem, will change.

  	struct tpm_chip *chip;
chip = tpmm_chip_alloc(dev, &tpm_tis);
@@ -1169,6 +1173,12 @@ int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
  		goto out_err;
  	}
+ /* It is not safe to assume localities are closed on startup */

This is somewhat useless comment.

E.g. this would be way more useful:

	/*
	 * Intel TXT starts with locality 2 active. Therefore,
	 * localities cannot be assumed to be closed on startup.
	 */

Okay, will expand.

+	for (locality = 0; locality <= TPM_MAX_LOCALITY; locality++) {
+		if (check_locality(chip, locality))
+			tpm_tis_relinquish_locality(chip, locality);
+	}
+
  	/* Take control of the TPM's interrupt hardware and shut it off */
  	rc = tpm_tis_read32(priv, TPM_INT_ENABLE(priv->locality), &intmask);
  	if (rc < 0)
diff --git a/include/linux/tpm.h b/include/linux/tpm.h
index 4ee9d13749ad..f2651281f02e 100644
--- a/include/linux/tpm.h
+++ b/include/linux/tpm.h
@@ -116,6 +116,8 @@ struct tpm_chip_seqops {
  	const struct seq_operations *seqops;
  };
+#define TPM_MAX_LOCALITY 4

Not documented.

Okay, will add spec ref.

+
  struct tpm_chip {
  	struct device dev;
  	struct device devs;

Thanks for the fix.

Your welcome.

BR, Jarkko

V/r,
DPS




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux Kernel]     [Linux Kernel Hardening]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux SCSI]

  Powered by Linux