The type definition of struct pci_setup_rom in <asm/pci.h> requires
struct setup_data from <asm/bootparam.h>. Many drivers include
<linux/pci.h>, but do not use boot parameters. Changes to bootparam.h
or its included header files could easily trigger a large, unnecessary
rebuild of the kernel.
Moving struct setup_data and related code into its own own header file
avoids including <asm/bootparam.h> in <asm/pci.h>. Instead include the
new header <asm/screen_data.h> and remove the include statement for
x86_init.h, which is unnecessary but pulls in bootparams.h.
Suggested-by: Ard Biesheuvel <ardb@xxxxxxxxxx>
Signed-off-by: Thomas Zimmermann <tzimmermann@xxxxxxx>
---
arch/x86/include/asm/pci.h | 2 +-
arch/x86/include/uapi/asm/bootparam.h | 218 +----------------------
arch/x86/include/uapi/asm/setup_data.h | 229 +++++++++++++++++++++++++
3 files changed, 231 insertions(+), 218 deletions(-)
create mode 100644 arch/x86/include/uapi/asm/setup_data.h
diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index b40c462b4af3..f6100df3652e 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -10,7 +10,7 @@
#include <linux/numa.h>
#include <asm/io.h>
#include <asm/memtype.h>
-#include <asm/x86_init.h>
+#include <asm/setup_data.h>
struct pci_sysdata {
int domain; /* PCI domain */
diff --git a/arch/x86/include/uapi/asm/bootparam.h b/arch/x86/include/uapi/asm/bootparam.h
index 01d19fc22346..f6361eb792fd 100644
--- a/arch/x86/include/uapi/asm/bootparam.h
+++ b/arch/x86/include/uapi/asm/bootparam.h
@@ -2,42 +2,7 @@
#ifndef _ASM_X86_BOOTPARAM_H
#define _ASM_X86_BOOTPARAM_H
-/* setup_data/setup_indirect types */
-#define SETUP_NONE 0
-#define SETUP_E820_EXT 1
-#define SETUP_DTB 2
-#define SETUP_PCI 3
-#define SETUP_EFI 4
-#define SETUP_APPLE_PROPERTIES 5
-#define SETUP_JAILHOUSE 6
-#define SETUP_CC_BLOB 7
-#define SETUP_IMA 8
-#define SETUP_RNG_SEED 9
-#define SETUP_ENUM_MAX SETUP_RNG_SEED
-
-#define SETUP_INDIRECT (1<<31)
-#define SETUP_TYPE_MAX (SETUP_ENUM_MAX | SETUP_INDIRECT)
-
-/* ram_size flags */
-#define RAMDISK_IMAGE_START_MASK 0x07FF
-#define RAMDISK_PROMPT_FLAG 0x8000
-#define RAMDISK_LOAD_FLAG 0x4000
-
-/* loadflags */
-#define LOADED_HIGH (1<<0)
-#define KASLR_FLAG (1<<1)
-#define QUIET_FLAG (1<<5)
-#define KEEP_SEGMENTS (1<<6)
-#define CAN_USE_HEAP (1<<7)
-
-/* xloadflags */
-#define XLF_KERNEL_64 (1<<0)
-#define XLF_CAN_BE_LOADED_ABOVE_4G (1<<1)
-#define XLF_EFI_HANDOVER_32 (1<<2)
-#define XLF_EFI_HANDOVER_64 (1<<3)
-#define XLF_EFI_KEXEC (1<<4)
-#define XLF_5LEVEL (1<<5)
-#define XLF_5LEVEL_ENABLED (1<<6)
+#include <asm/setup_data.h>
#ifndef __ASSEMBLY__
@@ -48,139 +13,6 @@
#include <asm/ist.h>
#include <video/edid.h>
-/* extensible setup data list node */
-struct setup_data {
- __u64 next;
- __u32 type;
- __u32 len;
- __u8 data[];
-};
-
-/* extensible setup indirect data node */
-struct setup_indirect {
- __u32 type;
- __u32 reserved; /* Reserved, must be set to zero. */
- __u64 len;
- __u64 addr;
-};
-
-struct setup_header {
- __u8 setup_sects;
- __u16 root_flags;
- __u32 syssize;
- __u16 ram_size;
- __u16 vid_mode;
- __u16 root_dev;
- __u16 boot_flag;
- __u16 jump;
- __u32 header;
- __u16 version;
- __u32 realmode_swtch;
- __u16 start_sys_seg;
- __u16 kernel_version;
- __u8 type_of_loader;
- __u8 loadflags;
- __u16 setup_move_size;
- __u32 code32_start;
- __u32 ramdisk_image;
- __u32 ramdisk_size;
- __u32 bootsect_kludge;
- __u16 heap_end_ptr;
- __u8 ext_loader_ver;
- __u8 ext_loader_type;
- __u32 cmd_line_ptr;
- __u32 initrd_addr_max;
- __u32 kernel_alignment;
- __u8 relocatable_kernel;
- __u8 min_alignment;
- __u16 xloadflags;
- __u32 cmdline_size;
- __u32 hardware_subarch;
- __u64 hardware_subarch_data;
- __u32 payload_offset;
- __u32 payload_length;
- __u64 setup_data;
- __u64 pref_address;
- __u32 init_size;
- __u32 handover_offset;
- __u32 kernel_info_offset;
-} __attribute__((packed));
-
-struct sys_desc_table {
- __u16 length;
- __u8 table[14];
-};
-
-/* Gleaned from OFW's set-parameters in cpu/x86/pc/linux.fth */
-struct olpc_ofw_header {
- __u32 ofw_magic; /* OFW signature */
- __u32 ofw_version;
- __u32 cif_handler; /* callback into OFW */
- __u32 irq_desc_table;
-} __attribute__((packed));
-
-struct efi_info {
- __u32 efi_loader_signature;
- __u32 efi_systab;
- __u32 efi_memdesc_size;
- __u32 efi_memdesc_version;
- __u32 efi_memmap;
- __u32 efi_memmap_size;
- __u32 efi_systab_hi;
- __u32 efi_memmap_hi;
-};
-
-/*
- * This is the maximum number of entries in struct boot_params::e820_table
- * (the zeropage), which is part of the x86 boot protocol ABI:
- */
-#define E820_MAX_ENTRIES_ZEROPAGE 128
-
-/*
- * The E820 memory region entry of the boot protocol ABI:
- */
-struct boot_e820_entry {
- __u64 addr;
- __u64 size;
- __u32 type;
-} __attribute__((packed));
-
-/*
- * Smallest compatible version of jailhouse_setup_data required by this kernel.
- */
-#define JAILHOUSE_SETUP_REQUIRED_VERSION 1
-
-/*
- * The boot loader is passing platform information via this Jailhouse-specific
- * setup data structure.
- */
-struct jailhouse_setup_data {
- struct {
- __u16 version;
- __u16 compatible_version;
- } __attribute__((packed)) hdr;
- struct {
- __u16 pm_timer_address;
- __u16 num_cpus;
- __u64 pci_mmconfig_base;
- __u32 tsc_khz;
- __u32 apic_khz;
- __u8 standard_ioapic;
- __u8 cpu_ids[255];
- } __attribute__((packed)) v1;
- struct {
- __u32 flags;
- } __attribute__((packed)) v2;
-} __attribute__((packed));
-
-/*
- * IMA buffer setup data information from the previous kernel during kexec
- */
-struct ima_setup_data {
- __u64 addr;
- __u64 size;
-} __attribute__((packed));
-
/* The so-called "zeropage" */
struct boot_params {
struct screen_info screen_info; /* 0x000 */
@@ -231,54 +63,6 @@ struct boot_params {
__u8 _pad9[276]; /* 0xeec */
} __attribute__((packed));
-/**
- * enum x86_hardware_subarch - x86 hardware subarchitecture
- *
- * The x86 hardware_subarch and hardware_subarch_data were added as of the x86
- * boot protocol 2.07 to help distinguish and support custom x86 boot
- * sequences. This enum represents accepted values for the x86
- * hardware_subarch. Custom x86 boot sequences (not X86_SUBARCH_PC) do not
- * have or simply *cannot* make use of natural stubs like BIOS or EFI, the
- * hardware_subarch can be used on the Linux entry path to revector to a
- * subarchitecture stub when needed. This subarchitecture stub can be used to
- * set up Linux boot parameters or for special care to account for nonstandard
- * handling of page tables.
- *
- * These enums should only ever be used by x86 code, and the code that uses
- * it should be well contained and compartmentalized.
- *
- * KVM and Xen HVM do not have a subarch as these are expected to follow
- * standard x86 boot entries. If there is a genuine need for "hypervisor" type
- * that should be considered separately in the future. Future guest types
- * should seriously consider working with standard x86 boot stubs such as
- * the BIOS or EFI boot stubs.
- *
- * WARNING: this enum is only used for legacy hacks, for platform features that
- * are not easily enumerated or discoverable. You should not ever use
- * this for new features.
- *
- * @X86_SUBARCH_PC: Should be used if the hardware is enumerable using standard
- * PC mechanisms (PCI, ACPI) and doesn't need a special boot flow.
- * @X86_SUBARCH_LGUEST: Used for x86 hypervisor demo, lguest, deprecated
- * @X86_SUBARCH_XEN: Used for Xen guest types which follow the PV boot path,
- * which start at asm startup_xen() entry point and later jump to the C
- * xen_start_kernel() entry point. Both domU and dom0 type of guests are
- * currently supported through this PV boot path.
- * @X86_SUBARCH_INTEL_MID: Used for Intel MID (Mobile Internet Device) platform
- * systems which do not have the PCI legacy interfaces.
- * @X86_SUBARCH_CE4100: Used for Intel CE media processor (CE4100) SoC
- * for settop boxes and media devices, the use of a subarch for CE4100
- * is more of a hack...
- */
-enum x86_hardware_subarch {
- X86_SUBARCH_PC = 0,
- X86_SUBARCH_LGUEST,
- X86_SUBARCH_XEN,
- X86_SUBARCH_INTEL_MID,
- X86_SUBARCH_CE4100,
- X86_NR_SUBARCHS,
-};
-
#endif /* __ASSEMBLY__ */
#endif /* _ASM_X86_BOOTPARAM_H */
diff --git a/arch/x86/include/uapi/asm/setup_data.h b/arch/x86/include/uapi/asm/setup_data.h
new file mode 100644
index 000000000000..e1396e1bf048
--- /dev/null
+++ b/arch/x86/include/uapi/asm/setup_data.h
@@ -0,0 +1,229 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI_ASM_X86_SETUP_DATA_H
+#define _UAPI_ASM_X86_SETUP_DATA_H
+
+/* setup_data/setup_indirect types */
+#define SETUP_NONE 0
+#define SETUP_E820_EXT 1
+#define SETUP_DTB 2
+#define SETUP_PCI 3
+#define SETUP_EFI 4
+#define SETUP_APPLE_PROPERTIES 5
+#define SETUP_JAILHOUSE 6
+#define SETUP_CC_BLOB 7
+#define SETUP_IMA 8
+#define SETUP_RNG_SEED 9
+#define SETUP_ENUM_MAX SETUP_RNG_SEED
+
+#define SETUP_INDIRECT (1<<31)
+#define SETUP_TYPE_MAX (SETUP_ENUM_MAX | SETUP_INDIRECT)
+
+/* ram_size flags */
+#define RAMDISK_IMAGE_START_MASK 0x07FF
+#define RAMDISK_PROMPT_FLAG 0x8000
+#define RAMDISK_LOAD_FLAG 0x4000
+
+/* loadflags */
+#define LOADED_HIGH (1<<0)
+#define KASLR_FLAG (1<<1)
+#define QUIET_FLAG (1<<5)
+#define KEEP_SEGMENTS (1<<6)
+#define CAN_USE_HEAP (1<<7)
+
+/* xloadflags */
+#define XLF_KERNEL_64 (1<<0)
+#define XLF_CAN_BE_LOADED_ABOVE_4G (1<<1)
+#define XLF_EFI_HANDOVER_32 (1<<2)
+#define XLF_EFI_HANDOVER_64 (1<<3)
+#define XLF_EFI_KEXEC (1<<4)
+#define XLF_5LEVEL (1<<5)
+#define XLF_5LEVEL_ENABLED (1<<6)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+/* extensible setup data list node */
+struct setup_data {
+ __u64 next;
+ __u32 type;
+ __u32 len;
+ __u8 data[];
+};
+
+/* extensible setup indirect data node */
+struct setup_indirect {
+ __u32 type;
+ __u32 reserved; /* Reserved, must be set to zero. */
+ __u64 len;
+ __u64 addr;
+};
+
+struct setup_header {
+ __u8 setup_sects;
+ __u16 root_flags;
+ __u32 syssize;
+ __u16 ram_size;
+ __u16 vid_mode;
+ __u16 root_dev;
+ __u16 boot_flag;
+ __u16 jump;
+ __u32 header;
+ __u16 version;
+ __u32 realmode_swtch;
+ __u16 start_sys_seg;
+ __u16 kernel_version;
+ __u8 type_of_loader;
+ __u8 loadflags;
+ __u16 setup_move_size;
+ __u32 code32_start;
+ __u32 ramdisk_image;
+ __u32 ramdisk_size;
+ __u32 bootsect_kludge;
+ __u16 heap_end_ptr;
+ __u8 ext_loader_ver;
+ __u8 ext_loader_type;
+ __u32 cmd_line_ptr;
+ __u32 initrd_addr_max;
+ __u32 kernel_alignment;
+ __u8 relocatable_kernel;
+ __u8 min_alignment;
+ __u16 xloadflags;
+ __u32 cmdline_size;
+ __u32 hardware_subarch;
+ __u64 hardware_subarch_data;
+ __u32 payload_offset;
+ __u32 payload_length;
+ __u64 setup_data;
+ __u64 pref_address;
+ __u32 init_size;
+ __u32 handover_offset;
+ __u32 kernel_info_offset;
+} __attribute__((packed));
+
+struct sys_desc_table {
+ __u16 length;
+ __u8 table[14];
+};
+
+/* Gleaned from OFW's set-parameters in cpu/x86/pc/linux.fth */
+struct olpc_ofw_header {
+ __u32 ofw_magic; /* OFW signature */
+ __u32 ofw_version;
+ __u32 cif_handler; /* callback into OFW */
+ __u32 irq_desc_table;
+} __attribute__((packed));
+
+struct efi_info {
+ __u32 efi_loader_signature;
+ __u32 efi_systab;
+ __u32 efi_memdesc_size;
+ __u32 efi_memdesc_version;
+ __u32 efi_memmap;
+ __u32 efi_memmap_size;
+ __u32 efi_systab_hi;
+ __u32 efi_memmap_hi;
+};
+
+/*
+ * This is the maximum number of entries in struct boot_params::e820_table
+ * (the zeropage), which is part of the x86 boot protocol ABI:
+ */
+#define E820_MAX_ENTRIES_ZEROPAGE 128
+
+/*
+ * The E820 memory region entry of the boot protocol ABI:
+ */
+struct boot_e820_entry {
+ __u64 addr;
+ __u64 size;
+ __u32 type;
+} __attribute__((packed));
+
+/*
+ * Smallest compatible version of jailhouse_setup_data required by this kernel.
+ */
+#define JAILHOUSE_SETUP_REQUIRED_VERSION 1
+
+/*
+ * The boot loader is passing platform information via this Jailhouse-specific
+ * setup data structure.
+ */
+struct jailhouse_setup_data {
+ struct {
+ __u16 version;
+ __u16 compatible_version;
+ } __attribute__((packed)) hdr;
+ struct {
+ __u16 pm_timer_address;
+ __u16 num_cpus;
+ __u64 pci_mmconfig_base;
+ __u32 tsc_khz;
+ __u32 apic_khz;
+ __u8 standard_ioapic;
+ __u8 cpu_ids[255];
+ } __attribute__((packed)) v1;
+ struct {
+ __u32 flags;
+ } __attribute__((packed)) v2;
+} __attribute__((packed));
+
+/*
+ * IMA buffer setup data information from the previous kernel during kexec
+ */
+struct ima_setup_data {
+ __u64 addr;
+ __u64 size;
+} __attribute__((packed));
+
+/**
+ * enum x86_hardware_subarch - x86 hardware subarchitecture
+ *
+ * The x86 hardware_subarch and hardware_subarch_data were added as of the x86
+ * boot protocol 2.07 to help distinguish and support custom x86 boot
+ * sequences. This enum represents accepted values for the x86
+ * hardware_subarch. Custom x86 boot sequences (not X86_SUBARCH_PC) do not
+ * have or simply *cannot* make use of natural stubs like BIOS or EFI, the
+ * hardware_subarch can be used on the Linux entry path to revector to a
+ * subarchitecture stub when needed. This subarchitecture stub can be used to
+ * set up Linux boot parameters or for special care to account for nonstandard
+ * handling of page tables.
+ *
+ * These enums should only ever be used by x86 code, and the code that uses
+ * it should be well contained and compartmentalized.
+ *
+ * KVM and Xen HVM do not have a subarch as these are expected to follow
+ * standard x86 boot entries. If there is a genuine need for "hypervisor" type
+ * that should be considered separately in the future. Future guest types
+ * should seriously consider working with standard x86 boot stubs such as
+ * the BIOS or EFI boot stubs.
+ *
+ * WARNING: this enum is only used for legacy hacks, for platform features that
+ * are not easily enumerated or discoverable. You should not ever use
+ * this for new features.
+ *
+ * @X86_SUBARCH_PC: Should be used if the hardware is enumerable using standard
+ * PC mechanisms (PCI, ACPI) and doesn't need a special boot flow.
+ * @X86_SUBARCH_LGUEST: Used for x86 hypervisor demo, lguest, deprecated
+ * @X86_SUBARCH_XEN: Used for Xen guest types which follow the PV boot path,
+ * which start at asm startup_xen() entry point and later jump to the C
+ * xen_start_kernel() entry point. Both domU and dom0 type of guests are
+ * currently supported through this PV boot path.
+ * @X86_SUBARCH_INTEL_MID: Used for Intel MID (Mobile Internet Device) platform
+ * systems which do not have the PCI legacy interfaces.
+ * @X86_SUBARCH_CE4100: Used for Intel CE media processor (CE4100) SoC
+ * for settop boxes and media devices, the use of a subarch for CE4100
+ * is more of a hack...
+ */
+enum x86_hardware_subarch {
+ X86_SUBARCH_PC = 0,
+ X86_SUBARCH_LGUEST,
+ X86_SUBARCH_XEN,
+ X86_SUBARCH_INTEL_MID,
+ X86_SUBARCH_CE4100,
+ X86_NR_SUBARCHS,
+};
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _UAPI_ASM_X86_SETUP_DATA_H */
--
2.43.0
