Before sending a TPM command, CLKRUN protocol must be disabled. This is not
done in the case of tpm1_do_selftest() call site inside tpm_tis_resume().
Address this by decorating the calls with tpm_chip_{start,stop}, which arm
and disarm the TPM chip for transmission, and take care of disabling and
re-enabling CLKRUN, among other things.
Cc: stable@xxxxxxxxxxxxxxx
Reported-by: Jason A. Donenfeld <Jason@xxxxxxxxx>
Link: https://lore.kernel.org/linux-integrity/CS68AWILHXS4.3M36M1EKZLUMS@suppilovahvero/
Fixes: a3fbfae82b4c ("tpm: take TPM chip power gating out of tpm_transmit()")
Signed-off-by: Jarkko Sakkinen <jarkko@xxxxxxxxxx>
---
drivers/char/tpm/tpm_tis_core.c | 43 +++++++++++++++------------------
1 file changed, 19 insertions(+), 24 deletions(-)
diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
index c2421162cf34..73707026e358 100644
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -1209,25 +1209,20 @@ static void tpm_tis_reenable_interrupts(struct tpm_chip *chip)
u32 intmask;
int rc;
- if (chip->ops->clk_enable != NULL)
- chip->ops->clk_enable(chip, true);
-
- /* reenable interrupts that device may have lost or
- * BIOS/firmware may have disabled
+ /*
+ * Re-enable interrupts that device may have lost or BIOS/firmware may
+ * have disabled.
*/
rc = tpm_tis_write8(priv, TPM_INT_VECTOR(priv->locality), priv->irq);
- if (rc < 0)
- goto out;
+ if (rc < 0) {
+ dev_err(&chip->dev, "Setting IRQ failed.\n");
+ return;
+ }
intmask = priv->int_mask | TPM_GLOBAL_INT_ENABLE;
-
- tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality), intmask);
-
-out:
- if (chip->ops->clk_enable != NULL)
- chip->ops->clk_enable(chip, false);
-
- return;
+ rc = tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality), intmask);
+ if (rc < 0)
+ dev_err(&chip->dev, "Enabling interrupts failed.\n");
}
int tpm_tis_resume(struct device *dev)
@@ -1235,27 +1230,27 @@ int tpm_tis_resume(struct device *dev)
struct tpm_chip *chip = dev_get_drvdata(dev);
int ret;
- ret = tpm_tis_request_locality(chip, 0);
- if (ret < 0)
+ ret = tpm_chip_start(chip);
+ if (ret)
return ret;
if (chip->flags & TPM_CHIP_FLAG_IRQ)
tpm_tis_reenable_interrupts(chip);
- ret = tpm_pm_resume(dev);
- if (ret)
- goto out;
-
/*
* TPM 1.2 requires self-test on resume. This function actually returns
* an error code but for unknown reason it isn't handled.
*/
if (!(chip->flags & TPM_CHIP_FLAG_TPM2))
tpm1_do_selftest(chip);
-out:
- tpm_tis_relinquish_locality(chip, 0);
- return ret;
+ tpm_chip_stop(chip);
+
+ ret = tpm_pm_resume(dev);
+ if (ret)
+ return ret;
+
+ return 0;
}
EXPORT_SYMBOL_GPL(tpm_tis_resume);
#endif
--
2.39.2
