On Fri, 21 Apr 2023 14:43:06 +0530, Krishna Yarlagadda wrote: > TPM devices may insert wait state on last clock cycle of ADDR phase. > For SPI controllers that support full-duplex transfers, this can be > detected using software by reading the MISO line. For SPI controllers > that only support half-duplex transfers, such as the Tegra QSPI, it is > not possible to detect the wait signal from software. The QSPI > controller in Tegra234 and Tegra241 implement hardware detection of the > wait signal which can be enabled in the controller for TPM devices. > > [...] Applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next Thanks! [1/3] spi: Add TPM HW flow flag commit: 67a142dc9eb96a5cc018e5db62390665eb5f038c [3/3] spi: tegra210-quad: Enable TPM wait polling commit: 967ca91a996f82219f2883e9e53d8e20df49025a All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark
