Re: [Patch V6 3/3] spi: tegra210-quad: Enable TPM wait polling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Feb 27, 2023 at 10:51:08PM +0530, Krishna Yarlagadda wrote:
> Trusted Platform Module requires flow control. As defined in TPM
> interface specification, client would drive MISO line at same cycle as
> last address bit on MOSI.
> Tegra241 QSPI controller has TPM wait state detection feature which is
> enabled for TPM client devices reported in SPI device mode bits.
> Set half duplex flag for TPM device to detect and send entire message
> to controller in one shot.
> 
> Signed-off-by: Krishna Yarlagadda <kyarlagadda@xxxxxxxxxx>
> ---
>  drivers/spi/spi-tegra210-quad.c | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)

Acked-by: Thierry Reding <treding@xxxxxxxxxx>

Attachment: signature.asc
Description: PGP signature


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux Kernel]     [Linux Kernel Hardening]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux SCSI]

  Powered by Linux