On Tue, Jun 21, 2022 at 03:24:43PM +0200, Lino Sanfilippo wrote:
> From: Lino Sanfilippo <l.sanfilippo@xxxxxxxxxx>
>
> According to the TPM Interface Specification (TIS) support for "stsValid"
> and "commandReady" interrupts is only optional.
> This has to be taken into account when handling the interrupts in functions
> like wait_for_tpm_stat(). To determine the supported interrupts use the
> capability query.
>
> Also adjust wait_for_tpm_stat() to only wait for interrupt reported status
> changes. After that process all the remaining status changes by polling
> the status register.
>
> Signed-off-by: Lino Sanfilippo <l.sanfilippo@xxxxxxxxxx>
> ---
> drivers/char/tpm/tpm_tis_core.c | 119 +++++++++++++++++++-------------
> drivers/char/tpm/tpm_tis_core.h | 1 +
> 2 files changed, 72 insertions(+), 48 deletions(-)
>
> diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
> index 09d8f04cbc81..cb469591373a 100644
> --- a/drivers/char/tpm/tpm_tis_core.c
> +++ b/drivers/char/tpm/tpm_tis_core.c
> @@ -53,41 +53,63 @@ static int wait_for_tpm_stat(struct tpm_chip *chip, u8 mask,
> long rc;
> u8 status;
> bool canceled = false;
> + u8 sts_mask = 0;
> + int ret = 0;
>
> /* check current status */
> status = chip->ops->status(chip);
> if ((status & mask) == mask)
> return 0;
>
> - stop = jiffies + timeout;
> + /* check what status changes can be handled by irqs */
> + if (priv->int_mask & TPM_INTF_STS_VALID_INT)
> + sts_mask |= TPM_STS_VALID;
>
> - if (chip->flags & TPM_CHIP_FLAG_IRQ) {
> + if (priv->int_mask & TPM_INTF_DATA_AVAIL_INT)
> + sts_mask |= TPM_STS_DATA_AVAIL;
> +
> + if (priv->int_mask & TPM_INTF_CMD_READY_INT)
> + sts_mask |= TPM_STS_COMMAND_READY;
> +
> + sts_mask &= mask;
I would instead mask out bits and write a helper function
taking care of this:
static u8 tpm_tis_filter_sts_mask(u8 int_mask, u8 sts_mask)
{
struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
if (!(int_mask & TPM_INTF_STS_VALID_INT))
sts_mask &= ~TPM_STS_VALID;
if (!(int_mask & TPM_INTF_DATA_AVAIL_INT))
sts_mask &= ~TPM_STS_DATA_AVAIL;
if (!(int_mask & TPM_INTF_CMD_READY_INT))
sts_mask &= ~TPM_STS_COMMAND_READY;
return sts_mask;
}
Less operations and imho somewhat cleaner structure.
Add suggested-by if you want.
BR, Jarkko
