From: Lino Sanfilippo <l.sanfilippo@xxxxxxxxxx> In tpm_tis_probe_single_irq() interrupt registers TPM_INT_VECTOR, TPM_INT_STATUS and TPM_INT_ENABLE are modified to setup the interrupts. Currently these modifications are done without holding a locality thus they have no effect. Fix this by claiming the (default) locality before the registers are written. Signed-off-by: Lino Sanfilippo <l.sanfilippo@xxxxxxxxxx> Reviewed-by: Jarkko Sakkinen <jarkko@xxxxxxxxxx> --- drivers/char/tpm/tpm_tis_core.c | 25 ++++++++++++++++++++----- 1 file changed, 20 insertions(+), 5 deletions(-) diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c index d32e93c86f48..09d8f04cbc81 100644 --- a/drivers/char/tpm/tpm_tis_core.c +++ b/drivers/char/tpm/tpm_tis_core.c @@ -756,30 +756,45 @@ static int tpm_tis_probe_irq_single(struct tpm_chip *chip, u32 intmask, } priv->irq = irq; + rc = request_locality(chip, 0); + if (rc < 0) + return rc; + rc = tpm_tis_read8(priv, TPM_INT_VECTOR(priv->locality), &original_int_vec); - if (rc < 0) + if (rc < 0) { + release_locality(chip, priv->locality); return rc; + } rc = tpm_tis_write8(priv, TPM_INT_VECTOR(priv->locality), irq); - if (rc < 0) + if (rc < 0) { + release_locality(chip, priv->locality); return rc; + } rc = tpm_tis_read32(priv, TPM_INT_STATUS(priv->locality), &int_status); - if (rc < 0) + if (rc < 0) { + release_locality(chip, priv->locality); return rc; + } /* Clear all existing */ rc = tpm_tis_write32(priv, TPM_INT_STATUS(priv->locality), int_status); - if (rc < 0) + if (rc < 0) { + release_locality(chip, priv->locality); return rc; + } /* Turn on */ rc = tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality), intmask | TPM_GLOBAL_INT_ENABLE); - if (rc < 0) + if (rc < 0) { + release_locality(chip, priv->locality); return rc; + } + release_locality(chip, priv->locality); clear_bit(TPM_TIS_IRQ_TESTED, &priv->flags); /* Generate an interrupt by having the core call through to -- 2.36.1