TPM2_GetCapability with a capability that has the property type value
of TPM_PT_TOTAL_COMMANDS returns a zero length list, when an Infineon
TPM2 is in field upgrade mode.
Since an Infineon TPM2.0 in field upgrade mode returns RC_SUCCESS on
TPM2_Startup, the field upgrade mode has to be detected by
TPM2_GetCapability.
Signed-off-by: Stefan Mahnke-Hartmann <stefan.mahnke-hartmann@xxxxxxxxxxxx>
---
Changelog:
* v2:
* Move check of -ENODATA to if condition below.
* Change 'field upgrade mode' to lower case.
drivers/char/tpm/tpm2-cmd.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/char/tpm/tpm2-cmd.c b/drivers/char/tpm/tpm2-cmd.c
index 04a3e23a4afc..c1eb5d223839 100644
--- a/drivers/char/tpm/tpm2-cmd.c
+++ b/drivers/char/tpm/tpm2-cmd.c
@@ -754,7 +754,11 @@ int tpm2_auto_startup(struct tpm_chip *chip)
rc = tpm2_get_cc_attrs_tbl(chip);
out:
- if (rc == TPM2_RC_UPGRADE) {
+ /*
+ * Infineon TPM in field upgrade mode will return no data for the number
+ * of supported commands.
+ */
+ if (rc == TPM2_RC_UPGRADE || rc == -ENODATA) {
dev_info(&chip->dev, "TPM in field upgrade mode, requires firmware upgrade\n");
chip->flags |= TPM_CHIP_FLAG_FIRMWARE_UPGRADE;
rc = 0;
--
2.25.1
