Re: [PATCH 5/5] spi: make remove callback a void function

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hello.

On 23.01.22 18:52, Uwe Kleine-König wrote:
The value returned by an spi driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)

So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
---

[...]

  drivers/net/ieee802154/adf7242.c                      |  4 +---
  drivers/net/ieee802154/at86rf230.c                    |  4 +---
  drivers/net/ieee802154/ca8210.c                       |  6 ++----
  drivers/net/ieee802154/cc2520.c                       |  4 +---
  drivers/net/ieee802154/mcr20a.c                       |  4 +---
  drivers/net/ieee802154/mrf24j40.c                     |  4 +---

[...]

For the ieee802154 drivers:

Acked-by: Stefan Schmidt <stefan@xxxxxxxxxxxxxxxxxx>

regards
Stefan Schmidt



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux Kernel]     [Linux Kernel Hardening]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux SCSI]

  Powered by Linux