On Wed, 2021-10-13 at 11:21 +0200, Sohaib Mohamed wrote:
> Remove parameter descriptions from all static functions.
> Remove the comment altogether that does not tell what the function does.
>
> Suggested-by: Jarkko Sakkinen <jarkko@xxxxxxxxxx>
> Signed-off-by: Sohaib Mohamed <sohaib.amhmd@xxxxxxxxx>
> ---
> drivers/char/tpm/st33zp24/st33zp24.c | 122 ++++-----------------------
> 1 file changed, 17 insertions(+), 105 deletions(-)
>
> diff --git a/drivers/char/tpm/st33zp24/st33zp24.c b/drivers/char/tpm/st33zp24/st33zp24.c
> index 4ec10ab5e576..ce9efb73c144 100644
> --- a/drivers/char/tpm/st33zp24/st33zp24.c
> +++ b/drivers/char/tpm/st33zp24/st33zp24.c
> @@ -61,9 +61,7 @@ enum tis_defaults {
> };
>
> /*
> - * clear_interruption clear the pending interrupt.
> - * @param: tpm_dev, the tpm device device.
> - * @return: the interrupt status value.
> + * clear the pending interrupt.
> */
> static u8 clear_interruption(struct st33zp24_dev *tpm_dev)
> {
> @@ -72,12 +70,10 @@ static u8 clear_interruption(struct st33zp24_dev *tpm_dev)
> tpm_dev->ops->recv(tpm_dev->phy_id, TPM_INT_STATUS, &interrupt, 1);
> tpm_dev->ops->send(tpm_dev->phy_id, TPM_INT_STATUS, &interrupt, 1);
> return interrupt;
> -} /* clear_interruption() */
> +}
>
> /*
> - * st33zp24_cancel, cancel the current command execution or
> - * set STS to COMMAND READY.
> - * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h
> + * cancel the current command execution or set STS to COMMAND READY.
> */
> static void st33zp24_cancel(struct tpm_chip *chip)
> {
> @@ -86,12 +82,10 @@ static void st33zp24_cancel(struct tpm_chip *chip)
>
> data = TPM_STS_COMMAND_READY;
> tpm_dev->ops->send(tpm_dev->phy_id, TPM_STS, &data, 1);
> -} /* st33zp24_cancel() */
> +}
>
> /*
> - * st33zp24_status return the TPM_STS register
> - * @param: chip, the tpm chip description
> - * @return: the TPM_STS register value.
> + * return the TPM_STS register
> */
> static u8 st33zp24_status(struct tpm_chip *chip)
> {
> @@ -100,12 +94,10 @@ static u8 st33zp24_status(struct tpm_chip *chip)
>
> tpm_dev->ops->recv(tpm_dev->phy_id, TPM_STS, &data, 1);
> return data;
> -} /* st33zp24_status() */
> +}
>
> /*
> - * check_locality if the locality is active
> - * @param: chip, the tpm chip description
> - * @return: true if LOCALITY0 is active, otherwise false
> + * if the locality is active
> */
> static bool check_locality(struct tpm_chip *chip)
> {
> @@ -120,13 +112,8 @@ static bool check_locality(struct tpm_chip *chip)
> return true;
>
> return false;
> -} /* check_locality() */
> +}
>
> -/*
> - * request_locality request the TPM locality
> - * @param: chip, the chip description
> - * @return: the active locality or negative value.
> - */
> static int request_locality(struct tpm_chip *chip)
> {
> struct st33zp24_dev *tpm_dev = dev_get_drvdata(&chip->dev);
> @@ -153,12 +140,8 @@ static int request_locality(struct tpm_chip *chip)
>
> /* could not get locality */
> return -EACCES;
> -} /* request_locality() */
> +}
>
> -/*
> - * release_locality release the active locality
> - * @param: chip, the tpm chip description.
> - */
> static void release_locality(struct tpm_chip *chip)
> {
> struct st33zp24_dev *tpm_dev = dev_get_drvdata(&chip->dev);
> @@ -171,8 +154,6 @@ static void release_locality(struct tpm_chip *chip)
>
> /*
> * get_burstcount return the burstcount value
> - * @param: chip, the chip description
> - * return: the burstcount or negative value.
> */
> static int get_burstcount(struct tpm_chip *chip)
> {
> @@ -200,18 +181,8 @@ static int get_burstcount(struct tpm_chip *chip)
> msleep(TPM_TIMEOUT);
> } while (time_before(jiffies, stop));
> return -EBUSY;
> -} /* get_burstcount() */
> -
> +}
>
> -/*
> - * wait_for_tpm_stat_cond
> - * @param: chip, chip description
> - * @param: mask, expected mask value
> - * @param: check_cancel, does the command expected to be canceled ?
> - * @param: canceled, did we received a cancel request ?
> - * @return: true if status == mask or if the command is canceled.
> - * false in other cases.
> - */
> static bool wait_for_tpm_stat_cond(struct tpm_chip *chip, u8 mask,
> bool check_cancel, bool *canceled)
> {
> @@ -228,13 +199,7 @@ static bool wait_for_tpm_stat_cond(struct tpm_chip *chip, u8 mask,
> }
>
> /*
> - * wait_for_stat wait for a TPM_STS value
> - * @param: chip, the tpm chip description
> - * @param: mask, the value mask to wait
> - * @param: timeout, the timeout
> - * @param: queue, the wait queue.
> - * @param: check_cancel, does the command can be cancelled ?
> - * @return: the tpm status, 0 if success, -ETIME if timeout is reached.
> + * wait for a TPM_STS value
> */
> static int wait_for_stat(struct tpm_chip *chip, u8 mask, unsigned long timeout,
> wait_queue_head_t *queue, bool check_cancel)
> @@ -292,15 +257,8 @@ static int wait_for_stat(struct tpm_chip *chip, u8 mask, unsigned long timeout,
> }
>
> return -ETIME;
> -} /* wait_for_stat() */
> +}
>
> -/*
> - * recv_data receive data
> - * @param: chip, the tpm chip description
> - * @param: buf, the buffer where the data are received
> - * @param: count, the number of data to receive
> - * @return: the number of bytes read from TPM FIFO.
> - */
> static int recv_data(struct tpm_chip *chip, u8 *buf, size_t count)
> {
> struct st33zp24_dev *tpm_dev = dev_get_drvdata(&chip->dev);
> @@ -325,12 +283,6 @@ static int recv_data(struct tpm_chip *chip, u8 *buf, size_t count)
> return size;
> }
>
> -/*
> - * tpm_ioserirq_handler the serirq irq handler
> - * @param: irq, the tpm chip description
> - * @param: dev_id, the description of the chip
> - * @return: the status of the handler.
> - */
> static irqreturn_t tpm_ioserirq_handler(int irq, void *dev_id)
> {
> struct tpm_chip *chip = dev_id;
> @@ -341,16 +293,10 @@ static irqreturn_t tpm_ioserirq_handler(int irq, void *dev_id)
> disable_irq_nosync(tpm_dev->irq);
>
> return IRQ_HANDLED;
> -} /* tpm_ioserirq_handler() */
> +}
>
> /*
> - * st33zp24_send send TPM commands through the I2C bus.
> - *
> - * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h
> - * @param: buf, the buffer to send.
> - * @param: count, the number of bytes to send.
> - * @return: In case of success the number of bytes sent.
> - * In other case, a < 0 value describing the issue.
> + * send TPM commands through the I2C bus.
> */
> static int st33zp24_send(struct tpm_chip *chip, unsigned char *buf,
> size_t len)
> @@ -431,14 +377,6 @@ static int st33zp24_send(struct tpm_chip *chip, unsigned char *buf,
> return ret;
> }
>
> -/*
> - * st33zp24_recv received TPM response through TPM phy.
> - * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h.
> - * @param: buf, the buffer to store datas.
> - * @param: count, the number of bytes to send.
> - * @return: In case of success the number of bytes received.
> - * In other case, a < 0 value describing the issue.
> - */
> static int st33zp24_recv(struct tpm_chip *chip, unsigned char *buf,
> size_t count)
> {
> @@ -478,12 +416,6 @@ static int st33zp24_recv(struct tpm_chip *chip, unsigned char *buf,
> return size;
> }
>
> -/*
> - * st33zp24_req_canceled
> - * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h.
> - * @param: status, the TPM status.
> - * @return: Does TPM ready to compute a new command ? true.
> - */
> static bool st33zp24_req_canceled(struct tpm_chip *chip, u8 status)
> {
> return (status == TPM_STS_COMMAND_READY);
> @@ -501,11 +433,7 @@ static const struct tpm_class_ops st33zp24_tpm = {
> };
>
> /*
> - * st33zp24_probe initialize the TPM device
> - * @param: client, the i2c_client description (TPM I2C description).
> - * @param: id, the i2c_device_id struct.
> - * @return: 0 in case of success.
> - * -1 in other case.
> + * initialize the TPM device
> */
> int st33zp24_probe(void *phy_id, const struct st33zp24_phy_ops *ops,
> struct device *dev, int irq, int io_lpcpd)
> @@ -583,11 +511,6 @@ int st33zp24_probe(void *phy_id, const struct st33zp24_phy_ops *ops,
> }
> EXPORT_SYMBOL(st33zp24_probe);
>
> -/*
> - * st33zp24_remove remove the TPM device
> - * @param: tpm_data, the tpm phy.
> - * @return: 0 in case of success.
> - */
> int st33zp24_remove(struct tpm_chip *chip)
> {
> tpm_chip_unregister(chip);
> @@ -596,12 +519,6 @@ int st33zp24_remove(struct tpm_chip *chip)
> EXPORT_SYMBOL(st33zp24_remove);
>
> #ifdef CONFIG_PM_SLEEP
> -/*
> - * st33zp24_pm_suspend suspend the TPM device
> - * @param: tpm_data, the tpm phy.
> - * @param: mesg, the power management message.
> - * @return: 0 in case of success.
> - */
> int st33zp24_pm_suspend(struct device *dev)
> {
> struct tpm_chip *chip = dev_get_drvdata(dev);
> @@ -615,14 +532,9 @@ int st33zp24_pm_suspend(struct device *dev)
> ret = tpm_pm_suspend(dev);
>
> return ret;
> -} /* st33zp24_pm_suspend() */
> +}
> EXPORT_SYMBOL(st33zp24_pm_suspend);
>
> -/*
> - * st33zp24_pm_resume resume the TPM device
> - * @param: tpm_data, the tpm phy.
> - * @return: 0 in case of success.
> - */
> int st33zp24_pm_resume(struct device *dev)
> {
> struct tpm_chip *chip = dev_get_drvdata(dev);
> @@ -640,7 +552,7 @@ int st33zp24_pm_resume(struct device *dev)
> tpm1_do_selftest(chip);
> }
> return ret;
> -} /* st33zp24_pm_resume() */
> +}
> EXPORT_SYMBOL(st33zp24_pm_resume);
> #endif
>
Thank you.
Reviewed-by: Jarkko Sakkinen <jarkko@xxxxxxxxxx>
/Jarkko
