[PATCH v4 8/9] tests: Extend sign_verify test with pkcs11-specific test

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Extend the sign_verify test with a pkcs11-specific test.

Since the openssl command line tool now needs to use a key provided by
an engine, extend some command lines with the additional parameters
'--keyform engine'. These parameters are passed using the global variable
OPENSSL_KEYFORM, which is only set when pkcs11 URIs are used.

Signed-off-by: Stefan Berger <stefanb@xxxxxxxxxxxxx>
---
 tests/functions.sh     | 45 ++++++++++++++++++++++++++++++++++--
 tests/ima_hash.test    |  2 +-
 tests/sign_verify.test | 52 ++++++++++++++++++++++++++++++------------
 3 files changed, 82 insertions(+), 17 deletions(-)

diff --git a/tests/functions.sh b/tests/functions.sh
index 91cd5d9..8f6f02d 100755
--- a/tests/functions.sh
+++ b/tests/functions.sh
@@ -248,8 +248,12 @@ _enable_gost_engine() {
 }
 
 # Show test stats and exit into automake test system
-# with proper exit code (same as ours).
-_report_exit() {
+# with proper exit code (same as ours). Do cleanups.
+_report_exit_and_cleanup() {
+  if [ -n "${WORKDIR}" ]; then
+    rm -rf "${WORKDIR}"
+  fi
+
   if [ $testsfail -gt 0 ]; then
     echo "================================="
     echo " Run with FAILEARLY=1 $0 $*"
@@ -272,3 +276,40 @@ _report_exit() {
   fi
 }
 
+# Setup SoftHSM for local testing by calling the softhsm_setup script.
+# Use the provided workdir as the directory where SoftHSM will store its state
+# into.
+# Upon successfully setting up SoftHSM, this function sets the global variables
+# OPENSSL_ENGINE and OPENSSL_KEYFORM so that the openssl command line tool can
+# use SoftHSM. Also the PKCS11_KEYURI global variable is set to the test key's
+# pkcs11 URI.
+_softhsm_setup() {
+  local workdir="$1"
+
+  local msg
+
+  export SOFTHSM_SETUP_CONFIGDIR="${workdir}/softhsm"
+  export SOFTHSM2_CONF="${workdir}/softhsm/softhsm2.conf"
+
+  mkdir -p "${SOFTHSM_SETUP_CONFIGDIR}"
+
+  msg=$(./softhsm_setup setup 2>&1)
+  if [ $? -eq 0 ]; then
+    echo "softhsm_setup setup succeeded: $msg"
+    PKCS11_KEYURI=$(echo $msg | sed -n 's|^keyuri: \(.*\)|\1|p')
+
+    export EVMCTL_ENGINE="--engine pkcs11"
+    export OPENSSL_ENGINE="-engine pkcs11"
+    export OPENSSL_KEYFORM="-keyform engine"
+  else
+    echo "softhsm_setup setup failed: ${msg}"
+  fi
+}
+
+# Tear down the SoftHSM setup and clean up the environment
+_softhsm_teardown() {
+  ./softhsm_setup teardown &>/dev/null
+  rm -rf "${SOFTHSM_SETUP_CONFIGDIR}"
+  unset SOFTHSM_SETUP_CONFIGDIR SOFTHSM2_CONF PKCS11_KEYURI \
+    EVMCTL_ENGINE OPENSSL_ENGINE OPENSSL_KEYFORM
+}
\ No newline at end of file
diff --git a/tests/ima_hash.test b/tests/ima_hash.test
index 6e0e463..e88fd59 100755
--- a/tests/ima_hash.test
+++ b/tests/ima_hash.test
@@ -20,7 +20,7 @@ PATH=../src:$PATH
 source ./functions.sh
 _require evmctl openssl getfattr
 
-trap _report_exit EXIT
+trap _report_exit_and_cleanup EXIT
 set -f # disable globbing
 
 check() {
diff --git a/tests/sign_verify.test b/tests/sign_verify.test
index 3b42eec..c56290a 100755
--- a/tests/sign_verify.test
+++ b/tests/sign_verify.test
@@ -28,7 +28,8 @@ fi
 
 ./gen-keys.sh >/dev/null 2>&1
 
-trap _report_exit EXIT
+trap _report_exit_and_cleanup EXIT
+WORKDIR=$(mktemp -d)
 set -f # disable globbing
 
 # Determine keyid from a cert
@@ -132,11 +133,16 @@ check_sign() {
   # OPTS (additional options for evmctl),
   # FILE (working file to sign).
   local "$@"
-  local KEY=${KEY%.*}.key
+  local key verifykey
   local FILE=${FILE:-$ALG.txt}
 
-  # Normalize key filename
-  KEY=test-${KEY#test-}
+  # Normalize key filename if it's not a pkcs11 URI
+  if [ ${KEY:0:7} != pkcs11: ]; then
+    key=${KEY%.*}.key
+    key=test-${key#test-}
+  else
+    key=${KEY}
+  fi
 
   # Append suffix to files for negative tests, because we may
   # leave only good files for verify tests.
@@ -152,33 +158,33 @@ check_sign() {
 
   if _test_expected_to_pass; then
     # Can openssl work with this digest?
-    cmd="openssl dgst $OPENSSL_ENGINE -$ALG $FILE"
+    cmd="openssl dgst $OPENSSL_ENGINE $OPENSSL_KEYFORM -$ALG $FILE"
     echo - "$cmd"
     if ! $cmd >/dev/null; then
-      echo "${CYAN}$ALG ($KEY) test is skipped (openssl is unable to digest)$NORM"
+      echo "${CYAN}$ALG ($key) test is skipped (openssl is unable to digest)$NORM"
       return "$SKIP"
     fi
 
-    if [ ! -e "$KEY" ]; then
-      echo "${CYAN}$ALG ($KEY) test is skipped (key file not found)$NORM"
+    if [ "${key:0:7}" != pkcs11: ] && [ ! -e "$key" ]; then
+      echo "${CYAN}$ALG ($key) test is skipped (key file not found)$NORM"
       return "$SKIP"
     fi
 
     # Can openssl sign with this digest and key?
-    cmd="openssl dgst $OPENSSL_ENGINE -$ALG -sign $KEY -hex $FILE"
+    cmd="openssl dgst $OPENSSL_ENGINE $OPENSSL_KEYFORM -$ALG -sign $key -hex $FILE"
     echo - "$cmd"
     if ! $cmd >/dev/null; then
-      echo "${CYAN}$ALG ($KEY) test is skipped (openssl is unable to sign)$NORM"
+      echo "${CYAN}$ALG ($key) test is skipped (openssl is unable to sign)$NORM"
       return "$SKIP"
     fi
   fi
 
   # Insert keyid from cert into PREFIX in-place of marker `:K:'
   if [[ $PREFIX =~ :K: ]]; then
-    keyid=$(_keyid_from_cert "$KEY")
+    keyid=$(_keyid_from_cert "$key")
     if [ $? -ne 0 ]; then
       color_red
-      echo "Unable to determine keyid for $KEY"
+      echo "Unable to determine keyid for $key"
       color_restore
       return "$HARDFAIL"
     fi
@@ -187,7 +193,7 @@ check_sign() {
   fi
 
   # Perform signing by evmctl
-  _evmctl_sign "$TYPE" "$KEY" "$ALG" "$FILE" "$OPTS" || return
+  _evmctl_sign "$TYPE" "$key" "$ALG" "$FILE" "$OPTS" || return
 
   # First simple pattern match the signature.
   ADD_TEXT_FOR=$ALG \
@@ -207,7 +213,13 @@ check_sign() {
   _extract_xattr "$FILE" "$(_xattr "$TYPE")" "$FILE.sig2" "$PREFIX"
 
   # Verify extracted signature with openssl
-  cmd="openssl dgst $OPENSSL_ENGINE -$ALG -verify ${KEY%.*}.pub \
+  if [ "${key:0:7}" != pkcs11: ]; then
+      verifykey=${key%.*}.pub
+  else
+      verifykey=${key}
+  fi
+
+  cmd="openssl dgst $OPENSSL_ENGINE $OPENSSL_KEYFORM -$ALG -verify ${verifykey} \
 	-signature $FILE.sig2 $FILE"
   echo - "$cmd"
   if ! $cmd; then
@@ -413,3 +425,15 @@ expect_fail \
 expect_fail \
   check_sign TYPE=ima KEY=gost2012_256-B ALG=md_gost12_512 PREFIX=0x0302 OPTS=
 
+# Test signing with key described by pkcs11 URI
+_softhsm_setup "${WORKDIR}"
+if [ -n "${PKCS11_KEYURI}" ]; then
+  expect_pass check_sign FILE=pkcs11test TYPE=ima KEY=${PKCS11_KEYURI} ALG=sha256 PREFIX=0x030204aabbccdd0100 OPTS=--keyid=aabbccdd
+  expect_pass check_sign FILE=pkcs11test TYPE=ima KEY=${PKCS11_KEYURI} ALG=sha1   PREFIX=0x030202aabbccdd0100 OPTS=--keyid=aabbccdd
+else
+  # to have a constant number of tests, skip these two tests
+  __skip() { echo "pkcs11 test is skipped: could not setup softhsm"; return $SKIP; }
+  expect_pass __skip
+  expect_pass __skip
+fi
+_softhsm_teardown "${WORKDIR}"
-- 
2.31.1




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux Kernel]     [Linux Kernel Hardening]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux SCSI]

  Powered by Linux