Re: [PATCH v5] tpm: Add Upgrade/Reduced mode support for TPM2 modules

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Aug 10, 2021 at 07:53:12PM +0200, Jarkko Sakkinen wrote:
> On Mon, Aug 09, 2021 at 07:47:30PM +0200, Borys Movchan wrote:
> > If something went wrong during the TPM firmware upgrade, like power
> > failure or the firmware image file get corrupted, the TPM might end
> > up in Upgrade or Failure mode upon the next start. The state is
> > persistent between the TPM power cycle/restart.
> > 
> > According to TPM specification:
> >  * If the TPM is in Upgrade mode, it will answer with TPM2_RC_UPGRADE
> >    to all commands except Field Upgrade related ones.
> >  * If the TPM is in Failure mode, it will allow performing TPM
> >    initialization but will not provide any crypto operations.
> >    Will happily respond to Field Upgrade calls.
> > 
> > Change the behavior of the tpm2_auto_startup(), so it detects the active
> > running mode of the TPM by adding the following checks.  If
> > tpm2_do_selftest() call returns TPM2_RC_UPGRADE, the TPM is in Upgrade
> > mode.
> > If the TPM is in Failure mode, it will successfully respond to both
> > tpm2_do_selftest() and tpm2_startup() calls. Although, will fail to
> > answer to tpm2_get_cc_attrs_tbl(). Use this fact to conclude that TPM is
> > in Failure mode.
> > 
> > If detected that the TPM is in the Upgrade or Failure mode, the function
> > sets TPM_CHIP_FLAG_LIMITED_MODE flag.
> 
> Does this apply for TPM 1.2? Are there differences?
> 

Actually I am not sure, I am working with TPM 2 exclusively have no
knowledge regarding other versions.

> > The limited mode flag is used later during driver
> > initialization/deinitialization to disable functionality which makes no
> > sense or will fail in the current TPM state. Following functionality is
> > affected:
> >  * do not register TPM as a hwrng
> >  * do not register sysfs entries which provide information impossible to
> >    obtain in limited mode
> >  * do not register resource managed character device
> 
> Maybe for consistency call it TPM_CHIP_FLAG_UPGRADE_MODE? It makes easier
> to "connect dots" later on (has probably something to do TPM_RC_UPGRADE).
> 
> 

My idea was to group both Failure and Upgrade mode and call them limited
mode. As functionality of the TPM is limited in both of them. I was
afraid that if I call it upgrade mode and map failure mode into it, it
might get confusing. So please confirm that you prefer to name the flag
as TPM_CHIP_FLAG_UPGRADE_MODE.

> > 
> > Signed-off-by: Borys Movchan <borysmn@xxxxxxxx>
> > ---
> > 
> > Notes:
> >     v2:
> >      * Commit message updated.
> >     
> >     v3:
> >      * Commit message reworked.
> >     
> >     v4:
> >      * Description of how tpm2_auto_startup() detects the mode added to
> >        commit message.
> >     
> >     v5:
> >      * Introduce global flag: TPM_CHIP_FLAG_LIMITED_MODE.
> >      * Add checks for the flag in places that will not work properly when TPM
> >        functionality is limited.
> >      * Avoid registering sysfs and character device entries that have no useful
> >        function in limited mode.
> >      * Do not register TPM as a hwrng.
> >      * Do not try to obtain any crypto-related properties from TPM as it will fail
> >        in limited mode.
> > 
> >  drivers/char/tpm/tpm-chip.c  | 16 ++++++++++------
> >  drivers/char/tpm/tpm-sysfs.c |  3 +++
> >  drivers/char/tpm/tpm2-cmd.c  | 13 ++++++++++++-
> >  include/linux/tpm.h          |  2 ++
> >  4 files changed, 27 insertions(+), 7 deletions(-)
> > 
> > diff --git a/drivers/char/tpm/tpm-chip.c b/drivers/char/tpm/tpm-chip.c
> > index ddaeceb7e109..8d159db39392 100644
> > --- a/drivers/char/tpm/tpm-chip.c
> > +++ b/drivers/char/tpm/tpm-chip.c
> > @@ -444,7 +444,7 @@ static int tpm_add_char_device(struct tpm_chip *chip)
> >  		return rc;
> >  	}
> >  
> > -	if (chip->flags & TPM_CHIP_FLAG_TPM2) {
> > +	if (chip->flags & TPM_CHIP_FLAG_TPM2 && !(chip->flags & TPM_CHIP_FLAG_LIMITED_MODE)) {
> 
> You cannot rely on validity of TPM_CHIP_FLAG_TPM2, as tpm_tis driver
> uses a TPM command to probe the TPM version.
> 

Good point, will fix in next patch version.

> >  		rc = cdev_device_add(&chip->cdevs, &chip->devs);
> >  		if (rc) {
> >  			dev_err(&chip->devs,
> > @@ -506,7 +506,8 @@ static int tpm_add_legacy_sysfs(struct tpm_chip *chip)
> >  	struct attribute **i;
> >  	int rc;
> >  
> > -	if (chip->flags & (TPM_CHIP_FLAG_TPM2 | TPM_CHIP_FLAG_VIRTUAL))
> > +	if (chip->flags & (TPM_CHIP_FLAG_TPM2 | TPM_CHIP_FLAG_VIRTUAL) ||
> > +		chip->flags & TPM_CHIP_FLAG_LIMITED_MODE)
> >  		return 0;
> >  
> >  	rc = compat_only_sysfs_link_entry_to_kobj(
> > @@ -536,7 +537,7 @@ static int tpm_hwrng_read(struct hwrng *rng, void *data, size_t max, bool wait)
> >  
> >  static int tpm_add_hwrng(struct tpm_chip *chip)
> >  {
> > -	if (!IS_ENABLED(CONFIG_HW_RANDOM_TPM))
> > +	if (!IS_ENABLED(CONFIG_HW_RANDOM_TPM) || chip->flags & TPM_CHIP_FLAG_LIMITED_MODE)
> >  		return 0;
> >  
> >  	snprintf(chip->hwrng_name, sizeof(chip->hwrng_name),
> > @@ -550,6 +551,9 @@ static int tpm_get_pcr_allocation(struct tpm_chip *chip)
> >  {
> >  	int rc;
> >  
> > +	if (chip->flags & TPM_CHIP_FLAG_LIMITED_MODE)
> > +		return 0;
> > +
> >  	rc = (chip->flags & TPM_CHIP_FLAG_TPM2) ?
> >  	     tpm2_get_pcr_allocation(chip) :
> >  	     tpm1_get_pcr_allocation(chip);
> > @@ -612,7 +616,7 @@ int tpm_chip_register(struct tpm_chip *chip)
> >  	return 0;
> >  
> >  out_hwrng:
> > -	if (IS_ENABLED(CONFIG_HW_RANDOM_TPM))
> > +	if (IS_ENABLED(CONFIG_HW_RANDOM_TPM) && !(chip->flags & TPM_CHIP_FLAG_LIMITED_MODE))
> >  		hwrng_unregister(&chip->hwrng);
> >  out_ppi:
> >  	tpm_bios_log_teardown(chip);
> > @@ -637,10 +641,10 @@ EXPORT_SYMBOL_GPL(tpm_chip_register);
> >  void tpm_chip_unregister(struct tpm_chip *chip)
> >  {
> >  	tpm_del_legacy_sysfs(chip);
> > -	if (IS_ENABLED(CONFIG_HW_RANDOM_TPM))
> > +	if (IS_ENABLED(CONFIG_HW_RANDOM_TPM) && !(chip->flags & TPM_CHIP_FLAG_LIMITED_MODE))
> >  		hwrng_unregister(&chip->hwrng);
> >  	tpm_bios_log_teardown(chip);
> > -	if (chip->flags & TPM_CHIP_FLAG_TPM2)
> > +	if (chip->flags & TPM_CHIP_FLAG_TPM2 && !(chip->flags & TPM_CHIP_FLAG_LIMITED_MODE))
> >  		cdev_device_del(&chip->cdevs, &chip->devs);
> >  	tpm_del_char_device(chip);
> >  }
> > diff --git a/drivers/char/tpm/tpm-sysfs.c b/drivers/char/tpm/tpm-sysfs.c
> > index 63f03cfb8e6a..43ea9c66342d 100644
> > --- a/drivers/char/tpm/tpm-sysfs.c
> > +++ b/drivers/char/tpm/tpm-sysfs.c
> > @@ -478,6 +478,9 @@ void tpm_sysfs_add_device(struct tpm_chip *chip)
> >  {
> >  	int i;
> >  
> > +	if (chip->flags & TPM_CHIP_FLAG_LIMITED_MODE)
> > +		return;
> > +
> >  	WARN_ON(chip->groups_cnt != 0);
> >  
> >  	if (chip->flags & TPM_CHIP_FLAG_TPM2)
> > diff --git a/drivers/char/tpm/tpm2-cmd.c b/drivers/char/tpm/tpm2-cmd.c
> > index a25815a6f625..598d62695310 100644
> > --- a/drivers/char/tpm/tpm2-cmd.c
> > +++ b/drivers/char/tpm/tpm2-cmd.c
> > @@ -729,7 +729,12 @@ int tpm2_auto_startup(struct tpm_chip *chip)
> >  		goto out;
> >  
> >  	rc = tpm2_do_selftest(chip);
> > -	if (rc && rc != TPM2_RC_INITIALIZE)
> > +	if (rc == TPM2_RC_UPGRADE) {
> > +		dev_info(&chip->dev, "TPM is in upgrade mode, functionality limited\n");
> > +		chip->flags |= TPM_CHIP_FLAG_LIMITED_MODE;
> > +		rc = 0;
> > +		goto out;
> > +	} else if (rc && rc != TPM2_RC_INITIALIZE)
> >  		goto out;
> >  
> >  	if (rc == TPM2_RC_INITIALIZE) {
> > @@ -743,6 +748,12 @@ int tpm2_auto_startup(struct tpm_chip *chip)
> >  	}
> >  
> >  	rc = tpm2_get_cc_attrs_tbl(chip);
> > +	if (rc) {
> 
> Why all rc's apply?
> 

Different vendors return different error codes here. Some, like STM
return vendor specific ones.

> > +		dev_info(&chip->dev, "TPM is in failure mode, functionality limited\n");
> 
> Here is again a different name for the same thing (different than
> TPM_CHIP_FLAG_LIMITED_MODE).
> 

This check is triggered only if TPM is in Failure mode. It is different
from Upgrade mode.

> > +		chip->flags |= TPM_CHIP_FLAG_LIMITED_MODE;
> > +		rc = 0;
> > +		goto out;
> > +	}
> >  
> >  out:
> >  	if (rc > 0)
> > diff --git a/include/linux/tpm.h b/include/linux/tpm.h
> > index aa11fe323c56..231d7c7ec913 100644
> > --- a/include/linux/tpm.h
> > +++ b/include/linux/tpm.h
> > @@ -207,6 +207,7 @@ enum tpm2_return_codes {
> >  	TPM2_RC_INITIALIZE	= 0x0100, /* RC_VER1 */
> >  	TPM2_RC_FAILURE		= 0x0101,
> >  	TPM2_RC_DISABLED	= 0x0120,
> > +	TPM2_RC_UPGRADE		= 0x012D,
> >  	TPM2_RC_COMMAND_CODE    = 0x0143,
> >  	TPM2_RC_TESTING		= 0x090A, /* RC_WARN */
> >  	TPM2_RC_REFERENCE_H0	= 0x0910,
> > @@ -277,6 +278,7 @@ enum tpm_chip_flags {
> >  	TPM_CHIP_FLAG_HAVE_TIMEOUTS	= BIT(4),
> >  	TPM_CHIP_FLAG_ALWAYS_POWERED	= BIT(5),
> >  	TPM_CHIP_FLAG_FIRMWARE_POWER_MANAGED	= BIT(6),
> > +	TPM_CHIP_FLAG_LIMITED_MODE	= BIT(7),
> >  };
> >  
> >  #define to_tpm_chip(d) container_of(d, struct tpm_chip, dev)
> > -- 
> > 2.20.1
> > 
> > 
> 
> /Jarkko

Kind regards,
Borys



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux Kernel]     [Linux Kernel Hardening]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux SCSI]

  Powered by Linux