[PATCH 0/1] draft RFC for TPM key format

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Note: this is a patch for openssl_tpm2_engine, not the kernel.

This is the text of the draft RFC for comments (although patches to
the xml would be preferred):

======
Network Working Group                                       J. Bottomley
Internet-Draft                                              Linux Kernel
Intended status: Informational                                  May 2021
Expires: 23 November 2021


               ASN.1 Specification for TPM 2.0 Key Files
                      draft-bottomley-tpm-keys-00

Abstract

   This specification is designed ot be an extension to the ASN.1
   (defined in [X.680]) specification of PKCS #1 [RFC8017] to define the
   file format of private keys that need to be loaded into a TPM 2
   device to operate.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at https://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on 2 November 2021.

Copyright Notice

   Copyright (c) 2021 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents (https://trustee.ietf.org/
   license-info) in effect on the date of publication of this document.
   Please review these documents carefully, as they describe your rights
   and restrictions with respect to this document.  Code Components
   extracted from this document must include Simplified BSD License text
   as described in Section 4.e of the Trust Legal Provisions and are
   provided without warranty as described in the Simplified BSD License.





Bottomley               Expires 23 November 2021                [Page 1]

Internet-Draft              TPM 2 Key Format                    May 2021


Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   2
   2.  Terminology . . . . . . . . . . . . . . . . . . . . . . . . .   2
     2.1.  Notation  . . . . . . . . . . . . . . . . . . . . . . . .   2
   3.  Key Representation  . . . . . . . . . . . . . . . . . . . . .   3
     3.1.  TPMkey Syntax . . . . . . . . . . . . . . . . . . . . . .   3
       3.1.1.  type  . . . . . . . . . . . . . . . . . . . . . . . .   4
       3.1.2.  emptyAuth . . . . . . . . . . . . . . . . . . . . . .   4
       3.1.3.  policy  . . . . . . . . . . . . . . . . . . . . . . .   4
       3.1.4.  secret  . . . . . . . . . . . . . . . . . . . . . . .   4
       3.1.5.  parent  . . . . . . . . . . . . . . . . . . . . . . .   5
       3.1.6.  pubkey  . . . . . . . . . . . . . . . . . . . . . . .   5
       3.1.7.  privkey . . . . . . . . . . . . . . . . . . . . . . .   5
   4.  Key Policy Specification  . . . . . . . . . . . . . . . . . .   5
     4.1.  TPMPolicy Syntax  . . . . . . . . . . . . . . . . . . . .   6
       4.1.1.  CommandCode . . . . . . . . . . . . . . . . . . . . .   6
       4.1.2.  CommandPolicy . . . . . . . . . . . . . . . . . . . .   6
     4.2.  Policy Implementation Considerations  . . . . . . . . . .   6
       4.2.1.  Authorization Policy  . . . . . . . . . . . . . . . .   6
   5.  Normative References  . . . . . . . . . . . . . . . . . . . .   7
   Author's Address  . . . . . . . . . . . . . . . . . . . . . . . .   7

1.  Introduction

   The Security of private keys has long been a concern and the ability
   of ubiquitous devices like TPMs has made it useful to use them for
   secure private key storage.  With the advent of TPM 2.0, private key
   storage inside the TPM (acting as a token which could be referred to
   by PKCS #11) has been discouraged, and instead key files which are
   loaded and evicted as necessary is the encouraged format.  This
   standard defines an interoperable ASN.1 representation for such key
   files, so that a key created by one tool should be loadable by a
   different one.

2.  Terminology

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

2.1.  Notation

   ASN.1  Abstract Syntax Notatition defined in [X.680]

   DER  Distinguished Encoding Rules.  Basically a defined binary
      representation for ASN.1




Bottomley               Expires 23 November 2021                [Page 2]

Internet-Draft              TPM 2 Key Format                    May 2021


   MSO  Most Significant Octet (the highest order byte of an integer)

   PEM  Privacy enhanced Electronic Mail.  An ASCII compatible
      representation of DER

   TCG  Trusted Computing Group

   TPM  Trusted Platform Module

3.  Key Representation

   All TPM 2.0 keys consist of two binary pieces, a public part, which
   can be parsed according to the TPM specification for TPM2B_PUBLIC
   [TPM2.0] and a private part, which is cryptographically sealed in
   such a way as to be only readable on the TPM that created it.  The
   purpose of this specification is to specify a format by which the
   public and private pieces of a TPM key can be loaded.

   The design of the TPMkey ASN.1 format is that it should have a
   distinguishing OID at the beginning so the DER/BER form of the key
   can be easily recognized.  In PEM form, the key MUST have "-----BEGIN
   TSS2 PRIVATE KEY-----" and "-----END TSS2 PRIVATE KEY-----" as the
   PEM guards.  All additional information that may be needed to load
   the key is specified as optional explicit elements, which can be
   extended by later specifications, which is why the TPMkey is not
   versioned.

3.1.  TPMkey Syntax

    TPMKey ::= SEQUENCE {
       type        OBJECT IDENTIFIER
       emptyAuth   [0] EXPLICIT BOOLEAN OPTIONAL
       policy      [1] EXPLICIT SEQUENCE OF TPMPolicy OPTIONAL
       secret      [2] EXPLICIT OCTET STRING OPTIONAL
       parent      INTEGER
       pubkey      OCTET STRING
       privkey     OCTET STRING
     }

   The fields of type TPMKey have the following meanings:











Bottomley               Expires 23 November 2021                [Page 3]

Internet-Draft              TPM 2 Key Format                    May 2021


3.1.1.  type

   A unique OID specifying the key type.  This standard currently
   defines three types of keys: a loadable key, specified by id-
   loadablekey, (to be loaded with TPM2_Load), an importable key,
   specified by id-importablekey, (to be loaded with TPM2_Import) and a
   sealed data key, specified by id-sealedkey, (to be extracted with
   TPM2_Unseal).  The TCG has reserved the following OID prefix for
   this:

     id-tpmkey OBJECT IDENTIFIER ::=
       {joint-iso-itu-t(2) international-organizations(23) 133 10}

   And the three key types are:

     id-loadablekey OBJECT IDENTIFIER ::=
       {id-tpmkey 3}

     id-importablekey OBJECT IDENTIFIER ::=
       {id-tpmkey 4}

     id-sealedkey OBJECT IDENTIFIER ::=
       {id-tpmkey 5}

3.1.2.  emptyAuth

   An implementation needs to know as it formulates the
   TPM2_Load/Import/Unseal command whether it must also send down an
   authorization, so this parameter gives that indication.  emptyAuth
   MUST be true if authorization is NOT required and MUST BE either
   false or absent if authorization is required.  Since this element has
   three states (one representing true and two representing false) it is
   RECOMMENDED that implementations emitting TPMkey representations use
   absence of the tag to represent false.  However, implementations
   reading TPMKey MUST be able to process all three possible states.

3.1.3.  policy

   This MUST be present if the TPM key has a policy hash because it
   describes to the implementation how to construct the policy.  The
   forms of the policy statement are described in section Section 4.

3.1.4.  secret

   This section describes the additional cryptographic secret used to
   specify the outer wrapping of an importable key.  It MUST be present
   for key type id-importablekey and MUST NOT be present for any other
   key type.



Bottomley               Expires 23 November 2021                [Page 4]

Internet-Draft              TPM 2 Key Format                    May 2021


3.1.5.  parent

   This MUST be present for all keys and specifies the parent key.  The
   parent key SHOULD be either a persistent handle (MSO 0x81) or a
   permanent handle (MSO 0x40).  Since volatile handle numbering can
   change unexpectedly depending on key load order, the parent SHOULD
   NOT be a volatile handle (MSO 0x80).  The parent MAY NOT be any other
   MSO.

   If a permanent handle (MSO 0x40) is specified then the implementation
   MUST run TPM2_CreatePrimary on the handle using the TCG specified
   Elliptic Curve template for the NIST P-256 curve and use the primary
   key so generated as the parent.

3.1.6.  pubkey

   This MUST be present and MUST correspond to the fully marshalled
   TPM2B_PUBLIC structure of the TPM Key with the exception that the
   leading U16 parameter specifying size MUST BE omitted (it is
   redundant, since all ASN.1 structures are length specified).

3.1.7.  privkey

   This MUST be present and MUST correspond to the fully marshalled
   TPM2B_PRIVATE structure of the TPM Key with the exception that the
   leading U16 parameter specifying size MUST BE omitted (it is
   redundant, since all ASN.1 structures are length specified).

4.  Key Policy Specification

   Policy is constructed on a TPM by executing a sequence of policy
   statements.  This specification currently only defines a limited
   subset of the allowed policy statements.  The policy is specified by
   a hash, which the execution of the policy statements must reach in
   order for the policy to be validated (See [TPM2.0] Part 1 for a
   detailed description.

   The TPMPolicy ASN.1 MUST be a sequence of policy statements which
   correspond exactly to TPM policy instructions in the order they
   should be executed and additionally from which the ultimate policy
   hash can be constructed.

   The current policy specification is strictly for AND based policy
   only and may be extended at a later date with OR policy.  However,
   the ASN.1 for policy is fomulated as CONS elements, leaving the
   possibility of adding additional but optional elements for policy
   statements which are not supported by this standard (such as
   TPM2_PolicyAuthorize).



Bottomley               Expires 23 November 2021                [Page 5]

Internet-Draft              TPM 2 Key Format                    May 2021


4.1.  TPMPolicy Syntax

    TPMPolicy ::= SEQUENCE {
       CommandCode   [0] EXPLICIT INTEGER
       CommandPolicy [1] EXPLICIT OCTET STRING
     }

   The Fields of type TPMPolicy have the following meanings:

4.1.1.  CommandCode

   This is the integer representation of the TPM command code for the
   policy statement.

4.1.2.  CommandPolicy

   This is a binary string representing a fully marshalled, TPM ordered,
   command body for the TPM policy command.  Therefore to send the
   command, the implementation simply marshalls the command code and
   appends this octet string as the body.

   Commands which have no body, such as TPM2_AuthVal, MUST be specified
   as a zero length OCTET STRING

4.2.  Policy Implementation Considerations

   The policy hash for AND based policies is constructed by extension of
   the prior policy hash

     newHash = HASH ( oldHash || policyHash )

   where policyHash is usually simply the hash of the fully marshalled
   policy command (including the CommandCode).  However, this isn't true
   for TPM2_PolicyCounterTimer() so always consult the [TPM2.0]
   specifications for how to construct the policyHash.

4.2.1.  Authorization Policy

   When Authorization (Passing in a password) is required, the emptyAuth
   parameter MUST be absent or set to false and additionally the
   TPM_CC_PolicyAuthValue MUST be specified as the command code for one
   entry in the TPMPolicy sequence.  However, the implementation MAY
   choose to execute either TPM2_PolicyPassword for TPM_RS_PW or
   TPM2_PolicyAuthValue for HMAC based authorization depending on
   whether the command being authorized is using sessions or not.  If
   the policy does not require an authorization then the emptyAuth
   parameter MUST be set to true.




Bottomley               Expires 23 November 2021                [Page 6]

Internet-Draft              TPM 2 Key Format                    May 2021


5.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <https://www.rfc-editor.org/info/rfc2119>.

   [RFC8017]  Moriarty, K., Ed., Kaliski, B., Jonsson, J., and A. Rusch,
              "PKCS #1: RSA Cryptography Specifications Version 2.2",
              RFC 8017, DOI 10.17487/RFC8017, November 2016,
              <https://www.rfc-editor.org/info/rfc8017>.

   [TPM2.0]   TCG, ., "TPM 2.0 Library Specification", 15 March 2013,
              <https://trustedcomputinggroup.org/resource/tpm-library-
              specification/>.

   [X.680]    ITU, "ITU-T Recommendation X.680, Information technology -
              Abstract Syntax Notation One (ASN.1): Specification of
              basic notation.", August 2015,
              <https://www.itu.int/rec/T-REC-X.680-201508-I/en>.

Author's Address

   James E.J. Bottomley
   Linux Kernel
   United States of America

   Email: James.Bottomley@xxxxxxxxxxxxxxxxxxxxx























Bottomley               Expires 23 November 2021                [Page 7]

======

James

---

James Bottomley (1):
  doc: add draft RFC for TPM Key format

 Makefile.am                       |   2 +-
 configure.ac                      |   4 +-
 doc/Makefile.am                   |  15 ++
 doc/draft-bottomley-tpm2-keys.xml | 329 ++++++++++++++++++++++++++++++
 4 files changed, 348 insertions(+), 2 deletions(-)
 create mode 100644 doc/Makefile.am
 create mode 100644 doc/draft-bottomley-tpm2-keys.xml

-- 
2.26.2




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux Kernel]     [Linux Kernel Hardening]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux SCSI]

  Powered by Linux