Re: [PATCH v9 2/9] x509: Detect sm2 keys by their parameters OID

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 3/5/21 11:04 PM, Stefan Berger wrote:
On 3/5/21 2:37 AM, Tianjia Zhang wrote:
Hi,

On 3/4/21 7:46 AM, Stefan Berger wrote:
Tianjia,

    can you say whether SM2 support works for you before and after applying this patch? I cannot verify it with an sm2 key I have created using a sequence of commands like this:

 > modprobe sm2_generic
 > id=$(keyctl newring test @u)
 > keyctl padd asymmetric "" $id < sm2.der
add_key: Key was rejected by service
 > keyctl padd asymmetric "" $id < eckeys/cert-prime192v1-0.der
88506426

The sm2 key is reject but the pime192v1 key works just fine. SM2 support neither worked for me before nor after this patch here. The difference is that before it returned 'add_key: Package not installed'.

This is my sm2 cert:

 > base64 < sm2.der
MIIBbzCCARWgAwIBAgIUfqwndeAy7reymWLwvCHOgYPU2YUwCgYIKoZIzj0EAwIwDTELMAkGA1UE AwwCbWUwHhcNMjEwMTI0MTgwNjQ3WhcNMjIwMTI0MTgwNjQ3WjANMQswCQYDVQQDDAJtZTBZMBMG ByqGSM49AgEGCCqBHM9VAYItA0IABEtiMaczdk46MEugmOsY/u+puf5qoi7JdLd/w3VpdixvDd26 vrxLKL7lCTVn5w3a07G7QB1dgdMDpzIRgWrVXC6jUzBRMB0GA1UdDgQWBBSxOVnE7ihvTb6Nczb4 /mow+HIc9TAfBgNVHSMEGDAWgBSxOVnE7ihvTb6Nczb4/mow+HIc9TAPBgNVHRMBAf8EBTADAQH/ MAoGCCqGSM49BAMCA0gAMEUCIE1kiji2ABUy663NANe0iCPjCeeqg02Yk4b3K+Ci/Qh4AiEA/cFB
eJEVklyveRMvuTP7BN7FG4U8iRdtedjiX+YrNio=

Regards,
    Stefan


Yes, it works fine here. Your test method may be wrong. First of all, the certificate looks wrong, I don’t know if it is not sent completely. Secondly, the SM2 algorithm must be compiled with builtin. There will be a problem when it is compiled into a module. This is a restriction for SM2 signature with Za. you may refer to this discussion:

https://lkml.org/lkml/2021/1/12/1736

In addition, give you a self-signed root certificate for my test:

-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----

If you can, please add:

Tested-by: Tianjia Zhang <tianjia.zhang@xxxxxxxxxxxxxxxxx>

good luck!


It works with your certificate! When I create the sm2 with OpenSSL on Ubuntu, which seems to have sm2 support, or so one may think, I get this type of signature:


I cannot create it with sm3, if that's how this is supposed to be signed:

> # openssl req -x509 -sm3 -newkey ec -pkeyopt ec_paramgen_curve:sm2 -keyout sm2key.pem -days 365 -subj '/CN=test' -nodes -outform der -out sm2.der
parameter error "ec_paramgen_curve:sm2"
140735899258064:error:100AE081:elliptic curve routines:EC_GROUP_new_by_curve_name:unknown group:crypto/ec/ec_curve.c:418: 140735899258064:error:100C508D:elliptic curve routines:pkey_ec_ctrl:invalid curve:crypto/ec/ec_pmeth.c:231:


Using sha256 instead, which is the mistake:

> openssl req -x509 -sha256 -newkey ec -pkeyopt ec_paramgen_curve:sm2 -keyout sm2key.pem -days 365 -subj '/CN=test' -nodes -outform der -out sm2-2nd.der

 > openssl x509 -inform der -in sm2-2nd.der -noout -text

[...]

     Signature Algorithm: ecdsa-with-SHA256
          30:45:02:20:05:72:15:b0:e8:f5:5a:27:d2:fb:f9:de:de:35:
          05:b2:76:8a:6f:84:c1:54:db:c2:38:8c:d2:64:8b:67:23:01:
          02:21:00:97:77:9e:42:fa:41:3d:d4:81:5e:5b:ad:9e:56:ad:
          46:fc:5e:94:92:a6:07:2d:af:62:d2:2d:39:7b:71:f1:4a


Yours has this type of signature:

     Signature Algorithm: 1.2.156.10197.1.501
          30:44:02:20:0b:cb:58:87:c6:16:af:39:bb:fb:d5:30:b7:39:
          1f:50:ff:0e:7a:cd:4b:45:61:4a:44:00:e1:d6:91:3b:8b:5c:
          02:20:01:6d:e5:84:35:c4:19:0d:92:d6:4e:ea:86:f4:fd:8a:
          0c:f3:a8:36:a5:7f:41:5f:fe:d1:78:cc:01:56:e5:86

Thanks anyway!


    Stefan


I guess it may be that your openssl version is too low. At present, only openssl 3.0.0 (still in the alpha stage and not yet officially released) can support the certificate of the SM2-with-SM3 algorithm combination.

This is the command I used in openssl-3.0.0-alpha6:

openssl ecparam -genkey -name SM2 -text -out ca.key
openssl req -new \
    -x509 -days 3650 \
    -sm3 -sigopt "distid:1234567812345678" \
    -key ca.key \
    -out ca.crt \
    -subj "/C=CN/ST=GS/L=Gt/O=baba/OU=OS/CN=ca/emailAddress=ca@xxxxxxxxx"



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux Kernel]     [Linux Kernel Hardening]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux SCSI]

  Powered by Linux