On Mon, Sep 09, 2019 at 06:09:06PM +0900, Seunghun Han wrote: > I got an AMD system which had a Ryzen Threadripper 1950X and MSI > mainboard, and I had a problem with AMD's fTPM. My machine showed an error > message below, and the fTPM didn't work because of it. > > [ 5.732084] tpm_crb MSFT0101:00: can't request region for resource > [mem 0x79b4f000-0x79b4ffff] > [ 5.732089] tpm_crb: probe of MSFT0101:00 failed with error -16 > > When I saw the iomem, I found two fTPM regions were in the ACPI NVS area. > The regions are below. > > 79a39000-79b6afff : ACPI Non-volatile Storage > 79b4b000-79b4bfff : MSFT0101:00 > 79b4f000-79b4ffff : MSFT0101:00 > > After analyzing this issue, I found that crb_map_io() function called > devm_ioremap_resource() and it failed. The ACPI NVS didn't allow the TPM > CRB driver to assign a resource in it because a busy bit was set to > the ACPI NVS area. > > To support AMD's fTPM, I added a function to check intersects between > the TPM region and ACPI NVS before it mapped the region. If some > intersects are detected, the function just calls devm_ioremap() for > a workaround. If there is no intersect, it calls devm_ioremap_resource(). > > Signed-off-by: Seunghun Han <kkamagui@xxxxxxxxx> This problem is still valid and not addressed by Vanya's patch (and should not be as it is a disjoint issue). However, calling devm_ioremap() is somewhat racy as the NVS driver is not aware of that. My take is that this should be fixed in the code that assigns regions to the NVS driver e.g. it could look up the regions assigned to the MSFT0101 and ignore those regions. In the end linux-acpi maintainers have the say on this but this would be the angle that I'd take to implement such patch probably. /Jarkko
