Currently for soft reboot(kexec_file_load) the kernel file and signature is measured by IMA. The cmdline args used to load the kernel is not measured. The boot aggregate that gets calculated will have no change since the EFI loader has not been triggered. Adding the kexec cmdline args measure and kernel version will add some attestable criteria. Following patch v2 set adds support in IMA to measure buffers, and uses the same to measure the cmdline arguments passed in case of kexec. Additional support to measure kernel version will follow in a subsequent patch set. Support for kexec_buffer pass for will be added later for the whole attestation/appraisal to work. Approaches and clarifications: 1) Use of Sig template Appraising buffer entries can't be done unless the buffers are pre calculated and available for appraisal. This raises a problem for cmdline args since the kernel can be loaded with a large set of args. For buffer entries, the appraisal can be deferred to attestation service, the event data is needed in that case. Adding the event data to ima template can be done by either adding a new template or reusing an existing one. -Using a new template entry will only work for buffers and adds no current use case for files, every EXISTING entry for measuring files will use this new template and so all but the buffer measurement line item will have the new columns empty. this will be a huge change pertaining to ima for a not a lot of use cases. 2) Adding a LSM hook We are doing both the command line and kernel version measurement in IMA. Can you please elaborate on how this can be used outside of the scenario? That will help me come back with a better design and code. I am neutral about this. I greatly appreciate the time and your feedback. -Prakhar Srivastava On Mon, Apr 15, 2019 at 2:38 PM Mimi Zohar <zohar@xxxxxxxxxxxxx> wrote: > > On Fri, 2019-04-12 at 11:08 -0700, prsriva02@xxxxxxxxx wrote: > > From: Prakhar Srivastava <prsriva@xxxxxxxxxxxxx> > > > > This adds a generic buffer measure ima function hook. > > A patch description should begin with a problem description or > motivation for the patch, before describing the solution. > > > The Buffer passed will be added to the sig field of the template if used. > > Template fields are defined in ima_template.c You can't simply re-use > an existing field like this. > > > The hash<algo configured>(buffer) is added as the IMA measurements, along side the buffer itself in hex. > > For cmdline: kernel file name is prefixed to the cmdline to distinguish between callers. > > An enum is used to control what all buffers can be written to it. > > > > Verified How: > > Replaced kernel on machine. > > read ima_measurement_log > > called kexec -s <with cmdline> > > read ima_measurement_log > > - A new entry for the cmdline passed can be seen. > > - HEX to text verified: http://www.unit-conversion.info/texttools/hexadecimal/ > > - Generated Hash for the text buffer and matched it with in IMA log > > The kexec man page provides this information. I don't see the need for > these details here. > > Please refer to section "2) Describe your changes" in > Documentation/process/submitting-patches.rst for instructions on > writing a patch description. > > > > > Signed-off-by: Prakhar Srivastava <prsriva@xxxxxxxxxxxxx> > > > --- > > include/linux/ima.h | 21 ++++- > > kernel/kexec_core.c | 68 +++++++++++++++ > > kernel/kexec_file.c | 18 ++++ > > kernel/kexec_internal.h | 6 +- > > security/integrity/ima/Kconfig | 16 ++++ > > security/integrity/ima/ima_main.c | 135 ++++++++++++++++++++++++++++++ > > security/integrity/integrity.h | 3 + > > 7 files changed, 264 insertions(+), 3 deletions(-) > > > > diff --git a/include/linux/ima.h b/include/linux/ima.h > > index 7f6952f8d6aa..46c3b95b2637 100644 > > --- a/include/linux/ima.h > > +++ b/include/linux/ima.h > > @@ -14,6 +14,14 @@ > > #include <linux/kexec.h> > > struct linux_binprm; > > > > +#ifdef CONFIG_IMA_BUFFER_MEASURE > > +enum buffer_id{ > > + KEXEC_CMDLINE = 1 > > + // other buffer ids > > + // KERNEL_VERSION > > There are already two enumerations - kernel_read_file_id and > kernel_load_file_id. Unless there are clear examples of other buffer > data, please don't define a new enumeration. Removed new enums. > > > +}; > > +#endif > > + > > #ifdef CONFIG_IMA > > extern int ima_bprm_check(struct linux_binprm *bprm); > > extern int ima_file_check(struct file *file, int mask, int opened); > > @@ -23,7 +31,10 @@ extern int ima_read_file(struct file *file, enum kernel_read_file_id id); > > extern int ima_post_read_file(struct file *file, void *buf, loff_t size, > > enum kernel_read_file_id id); > > extern void ima_post_path_mknod(struct dentry *dentry); > > - > > +#ifdef CONFIG_IMA_BUFFER_MEASURE > > +extern int ima_add_buffer_measure(const void *buff, > > + loff_t size, enum buffer_id id); > > +#endif > > #ifdef CONFIG_IMA_KEXEC > > extern void ima_add_kexec_buffer(struct kimage *image); > > #endif > > @@ -64,7 +75,13 @@ static inline void ima_post_path_mknod(struct dentry *dentry) > > { > > return; > > } > > - > > +#ifndef CONFIG_IMA_BUFFER_MEASURE > > +static inline int ima_add_buffer_measure(const void *buff, > > + loff_t size, enum buffer_id id) > > +{ > > + return 0; > > +} > > +#endif /* CONFIG_IMA_BUFFER_MEASURE */ > > #endif /* CONFIG_IMA */ > > > > #ifndef CONFIG_IMA_KEXEC > > diff --git a/kernel/kexec_core.c b/kernel/kexec_core.c > > index ae1a3ba24df5..7cf795794fda 100644 > > --- a/kernel/kexec_core.c > > +++ b/kernel/kexec_core.c > > @@ -1151,3 +1151,71 @@ void __weak arch_kexec_protect_crashkres(void) > > > > void __weak arch_kexec_unprotect_crashkres(void) > > {} > > + > > +#ifdef CONFIG_MEASURE_KEXEC_CMDLINE > > In general "ifdef's" don't belong in C code. Please refer to section > 21) Conditional Compilation of Documentation/process/coding-style.rst > section. > > Before posting patches, please run scripts/checkpatch.pl. I greatly appreciate the direction. Running all new patches through checkpatch.pl > > > +/** > > + * kexec_cmdline_prepend_img_name - prepare the buffer with cmdline > > + * that needs to be measured > > + * @outbuf - out buffer that contains the formated string > > + * @kernel_fd - the fild identifier for the kerenel image > > + * @cmdline_ptr - ptr to the cmdline buffer > > + * @cmdline_len - len of the buffer. > > + * > > + * This generates a buffer in the format Kerenelfilename::cmdline > > + * > > + * On success return 0. > > + * On failure return -EINVAL. > > +*/ > > +int kexec_cmdline_prepend_img_name(char **outbuf, int kernel_fd, > > + const char __user *cmdline_ptr, > > + unsigned long cmdline_len) > > +{ > > + int ret = -EINVAL; > > + struct fd f = {}; > > + int size = 0; > > + char *buf = NULL; > > + char *temp_buf = NULL; > > + char delimiter[] = "::"; > > + > > + if (!outbuf) > > + goto out; > > + > > + f = fdget(kernel_fd); > > + if (!f.file) > > + goto out; > > + > > + size = (f.file->f_path.dentry->d_name.len + cmdline_len - 1+ > > + ARRAY_SIZE(delimiter)) -1; > > + > > + buf = kzalloc(size, GFP_KERNEL); > > + if (!buf) > > + goto out; > > + > > + temp_buf = memdup_user(cmdline_ptr, cmdline_len); > > + if (IS_ERR(temp_buf)) { > > + kfree(buf); > > + ret = PTR_ERR(temp_buf); > > + goto out; > > + } > > + > > + memcpy(buf, f.file->f_path.dentry->d_name.name, > > + f.file->f_path.dentry->d_name.len); > > + memcpy(buf + f.file->f_path.dentry->d_name.len, > > + delimiter, ARRAY_SIZE(delimiter) -1); > > + memcpy(buf + f.file->f_path.dentry->d_name.len + > > + ARRAY_SIZE(delimiter) - 1, > > + temp_buf, cmdline_len -1); > > + > > + *outbuf = buf; > > + ret = size; > > + > > + pr_debug("kexec cmdline buff: %s\n",buf); > > + > > +out: > > + if (f.file) > > + fdput(f); > > + > > + kfree(temp_buf); > > + return ret; > > +} > > +#endif > > \ No newline at end of file > > diff --git a/kernel/kexec_file.c b/kernel/kexec_file.c > > index b118735fea9d..a3a839f2710d 100644 > > --- a/kernel/kexec_file.c > > +++ b/kernel/kexec_file.c > > @@ -126,6 +126,10 @@ kimage_file_prepare_segments(struct kimage *image, int kernel_fd, int initrd_fd, > > int ret = 0; > > void *ldata; > > loff_t size; > > +#ifdef CONFIG_MEASURE_KEXEC_CMDLINE > > + char *buff_to_measure = NULL; > > + int buff_to_measure_size = 0; > > +#endif > > > > ret = kernel_read_file_from_fd(kernel_fd, &image->kernel_buf, > > &size, INT_MAX, READING_KEXEC_IMAGE); > > @@ -133,6 +137,16 @@ kimage_file_prepare_segments(struct kimage *image, int kernel_fd, int initrd_fd, > > return ret; > > image->kernel_buf_len = size; > > > > +#ifdef CONFIG_MEASURE_KEXEC_CMDLINE > > + /* IMA measures the cmdline passed to the next kernel*/ > > + buff_to_measure_size = kexec_cmdline_prepend_img_name(&buff_to_measure, > > + kernel_fd, cmdline_ptr, cmdline_len); > > The kexec kernel image pathname is already in the measurement list. > There's no need for adding it again. The thinking behind this appoach is: if multiple kexecs take place with same cmdline args the ima log entries will collide[assuming kexec_buffer is passed to next kernel].This will lead to not being able to distinguish between which kernel was loaded with what cmdline args. > > > + > > + if (buff_to_measure_size > 0) > > + ima_add_buffer_measure(buff_to_measure, buff_to_measure_size, > > + KEXEC_CMDLINE); > > This affects multiple kernel subsystems. To simplify review, this > patch needs to be broken up. Define a new IMA (or security) hook in > one patch. In a separate patch, call that hook. Refer to section "3) > Separate your changes" of Documentation/process/submitting- > patches.rst. > v2 patches are broken down with other maintainers/owners. > This call is in the wrong place. It should be deferred to where the > boot command line is actually used. Moved it down. Thnakyou. > > if (cmdline_len) { > image->cmdline_buf = memdup_user(cmdline_ptr, cmdline_len); > if (IS_ERR(image->cmdline_buf)) { > ret = PTR_ERR(image->cmdline_buf); > image->cmdline_buf = NULL; > goto out; > } > > > > +#endif > > + > > /* IMA needs to pass the measurement list to the next kernel. */ > > ima_add_kexec_buffer(image); > > > > @@ -195,6 +209,10 @@ kimage_file_prepare_segments(struct kimage *image, int kernel_fd, int initrd_fd, > > image->image_loader_data = ldata; > > out: > > /* In case of error, free up all allocated memory in this function */ > > +#ifdef CONFIG_MEASURE_KEXEC_CMDLINE > > + kfree(buff_to_measure); > > +#endif > > + > > if (ret) > > kimage_file_post_load_cleanup(image); > > return ret; > > diff --git a/kernel/kexec_internal.h b/kernel/kexec_internal.h > > index 799a8a452187..808aa2330cdb 100644 > > --- a/kernel/kexec_internal.h > > +++ b/kernel/kexec_internal.h > > @@ -11,7 +11,11 @@ int kimage_load_segment(struct kimage *image, struct kexec_segment *segment); > > void kimage_terminate(struct kimage *image); > > int kimage_is_destination_range(struct kimage *image, > > unsigned long start, unsigned long end); > > - > > +#ifdef CONFIG_MEASURE_KEXEC_CMDLINE > > +int kexec_cmdline_prepend_img_name(char **outbuf, int kernel_fd, > > + const char __user *cmdline_ptr, > > + unsigned long cmdline_len); > > +#endif > > extern struct mutex kexec_mutex; > > > > #ifdef CONFIG_KEXEC_FILE > > diff --git a/security/integrity/ima/Kconfig b/security/integrity/ima/Kconfig > > index 370eb2f4dd37..349e5a818a5f 100644 > > --- a/security/integrity/ima/Kconfig > > +++ b/security/integrity/ima/Kconfig > > @@ -219,3 +219,19 @@ config IMA_APPRAISE_SIGNED_INIT > > default n > > help > > This option requires user-space init to be signed. > > + > > +config IMA_BUFFER_MEASURE > > + bool "IMA to measure buffers" > > + depends on IMA=y > > + depends on CRYPTO=y > > + default n > > + help > > + This enables buffer measurement in ima. > > + > > +config MEASURE_KEXEC_CMDLINE > > + bool "Measure cmdline passed to KEXEC" > > + depends on KEXEC_FILE=y > > + depends on IMA_BUFFER_MEASURE =y > > + default n > > + help > > + This measures the cmldine passed to kexec_file_load call. > > > IMA is policy based. Neither of these Kconfig options should be > necessary. Removing these Kconfig options, will remove the > unnecessary ifdefs throughout. > Moved to a policy entry check. > > \ No newline at end of file > > diff --git a/security/integrity/ima/ima_main.c b/security/integrity/ima/ima_main.c > > index 2aebb7984437..6d1335601672 100644 > > --- a/security/integrity/ima/ima_main.c > > +++ b/security/integrity/ima/ima_main.c > > @@ -416,6 +416,141 @@ int ima_post_read_file(struct file *file, void *buf, loff_t size, > > return process_measurement(file, buf, size, MAY_READ, func, 0); > > } > > > > +#ifdef CONFIG_IMA_BUFFER_MEASURE > > +/** > > + * ima_update_template_sig_field - update the sig field with the > > + * buffer passed. > > + * @entry - template entry that needs to be edited. > > + * @buff - biffer that needs to be added to the sig field > > + * @size - length of the buffer > > + * > > + * update the sig field of the template to contain the buffer. > > + * > > +*/ > > +void ima_update_template_sig_field(struct ima_template_entry *entry, > > + const void *buff, loff_t size) > > Each template field is defined in ima_template.c with operations to > initialize and display the field. You can't just re-use an existing > field like this. > The buffer entries that are added to the on appraisal/attestation will need the buffer data. since the sig field contains siganture for file, for buffers i was looking to use it dump the event data. Is your suggestion to not use the sig field or use the tempalte initialization calls instead to fill appropriate data. > > +{ > > + int field_index = 0; > > + struct buffer_data{ > > + uint8_t type; /* xattr type */ > > + uint32_t buff_len; /* Length of buffer added */ > > + char data[0]; /* Data buffer*/ > > + }; > > + struct buffer_data tmp_buff , *string_data = &tmp_buff; > > + > > + string_data = kzalloc(size + sizeof(*string_data), GFP_KERNEL); > > + if(IS_ERR(string_data)) > > + goto out; > > + > > + if(!entry || !buff || size ==0) > > + goto out; > > + > > + string_data->type = IMA_BUFFER_ENCODED; > > + string_data->buff_len = size; > > + memcpy(string_data->data, buff, size); > > + > > + for(field_index = 0; field_index < entry->template_desc->num_fields ; > > + field_index++) > > + { > > + if(strcmp(entry->template_desc->fields[field_index]->field_id, "sig") > > + == 0) > > + { > > + entry->template_data[field_index].len = > > + sizeof(*string_data) + string_data->buff_len; > > + entry->template_data[field_index].data = > > + kzalloc(entry->template_data[field_index].len, GFP_KERNEL); > > + if(IS_ERR(entry->template_data[field_index].data)) > > + { > > + entry->template_data[field_index].len = 0; > > + kfree(entry->template_data[field_index].data); > > + goto out; > > + } > > + memcpy(entry->template_data[field_index].data, string_data , > > + entry->template_data[field_index].len); > > + } > > + > > + } > > + > > +out: > > + kfree(string_data); > > +} > > + > > +/** > > + * ima_add_buffer_measure - Measure the buffer passed to ima log. > > + * (Instead of using the file hash the buffer hash is used). > > + * @buff - The buffer that needs to be added to the log > > + * @size - size of buffer(in bytes) > > + * @id - buffer id, this is differentiator for the various buffers > > + * that can be measured. > > + * > > + * The buffer passed is added to the ima logs. > > + * If the sig template is used, then the sig field contains the buffer. > > + * > > + * On success return 0. > > + * On error cases surface errors from ima calls. > > + */ > > +int ima_add_buffer_measure(const void *buff, loff_t size, > > + enum buffer_id id) > > Initially you might want to only measure the kexec boot command line, > but will you ever want to verify or audit log the boot command line > hash? Perhaps LSMs would be interested in the boot command line. > Should this be an LSM hook? > It definitely will be great addtion. > Mimi > > > +{ > > + int ret = -EINVAL; > > + struct ima_template_entry *entry = NULL; > > + struct integrity_iint_cache tmp_iint, *iint = &tmp_iint; > > + struct ima_event_data event_data = {iint, NULL, NULL, > > + NULL, 0, NULL}; > > + struct { > > + struct ima_digest_data hdr; > > + char digest[IMA_MAX_DIGEST_SIZE]; > > + } hash; > > + > > + int violation = 0; > > + char *name = NULL; > > + > > + if (!buff || size ==0) > > + goto err_out; > > + > > + switch (id) { > > + case KEXEC_CMDLINE: > > + name = "kexec-cmdline"; > > + break; > > + default: > > + name = "unknown"; > > + goto err_out; > > + } > > + > > + memset(iint, 0, sizeof(*iint)); > > + memset(&hash, 0, sizeof(hash)); > > + > > + event_data.filename = name; > > + > > + iint->ima_hash = &hash.hdr; > > + iint->ima_hash->algo = ima_hash_algo; > > + iint->ima_hash->length = hash_digest_size[ima_hash_algo]; > > + > > + ret = ima_calc_buffer_hash(buff, size, iint->ima_hash); > > + if (ret < 0) > > + goto err_out; > > + > > + ret = ima_alloc_init_template(&event_data, &entry); > > + if (ret < 0) > > + goto err_out; > > + > > + ima_update_template_sig_field(entry, buff, size); > > + > > + ret = ima_store_template(entry, violation, NULL, > > + buff, CONFIG_IMA_MEASURE_PCR_IDX); > > + if (ret < 0) { > > + ima_free_template_entry(entry); > > + goto err_out; > > + } > > + > > + return 0; > > + > > +err_out: > > + pr_err("Error in adding buffer measure: %d\n", ret); > > + return ret; > > +} > > +#endif > > + > > static int __init init_ima(void) > > { > > int error; > > diff --git a/security/integrity/integrity.h b/security/integrity/integrity.h > > index 24520b4ef3b0..85efa38b9f83 100644 > > --- a/security/integrity/integrity.h > > +++ b/security/integrity/integrity.h > > @@ -58,6 +58,9 @@ enum evm_ima_xattr_type { > > EVM_XATTR_HMAC, > > EVM_IMA_XATTR_DIGSIG, > > IMA_XATTR_DIGEST_NG, > > +#ifdef CONFIG_IMA_BUFFER_MEASURE > > + IMA_BUFFER_ENCODED, > > +#endif > > IMA_XATTR_LAST > > }; > > >
