On Thu, Feb 07, 2019 at 07:41:56PM +0100, Alexander Steffen wrote: > On 06.02.2019 13:06, Jarkko Sakkinen wrote: > > On Wed, Feb 06, 2019 at 12:47:07AM +0200, Jarkko Sakkinen wrote: > > > Make the changes necessary to detach TPM space code and TPM activation > > > code out of the tpm_transmit() flow because of both of these can cause > > > nested tpm_transmit() calls. The nesteds calls make the whole flow hard > > > to maintain, and thus, it is better to just fix things now before this > > > turns into a bigger mess. > > > > > > v11: > > > * Drop the patch that tries to flush TPM space on system. Not a proper > > > fallback + out of scope for this patch set. > > > > > > v10: > > > * Use void pointers to avoid unnecessary casts in functions paramaters > > > where it makes sense. > > > > > > v9: > > > * Fixed again tpm_try_get_ops(). > > > * Added missing reviewed-by's. > > > > > > v8: > > > * Re-add the check for ret < 0 after calling tpm_try_transmit() that > > > was dropped by mistake while moving code. > > > * Fix error fallback for tpm_try_get_ops() when tpm_chip_start() > > > fails. > > > > > > v7: > > > * Reorganize series so that more trivial and self-contained changes are > > > in the head. > > > > > > v6: > > > * When tpm_validate_commmand() was moved to tpm2-space.c, the struct for > > > the TPM header was incorrectly declared as struct tpm_input_header. > > > * Fix return value in tpm_validate_command(). > > > > > > v5: > > > * Add the missing rev's from Stefan Berger. > > > > > > v4: > > > * Return 0 from pcrs_show() when tpm1_pcr_read() fails. > > > * Fix error handling flow in tpm_try_transmit(). > > > * Replace struct tpm_input_header and struct tpm_output_header with > > > struct tpm_header. > > > > > > v3: > > > * Encapsulate power gating code to tpm_chip_start() and tpm_chip_stop(). > > > * Move TPM power gating code and locking to tpm_try_get_ops() and > > > tpm_put_ops(). > > > * Call power gating code directly in tpm_chip_register() and > > > tpm2_del_space(). > > > > > > v2: > > > * Print tpm2_commit_space() error inside tpm2_commit_space() > > > * Error code was not printed when recv() callback failed. It is > > > fixed in this version. > > > * Added a patch that removes @space from tpm_transmit(). > > > * Fixed a regression in earlier series. Forgot to amend the change > > > from the staging area that renames NESTED to UNLOCKED in tpm2-space.c. > > > > > > Jarkko Sakkinen (16): > > > tpm: use tpm_buf in tpm_transmit_cmd() as the IO parameter > > > tpm: fix invalid return value in pubek_show() > > > tpm: return 0 from pcrs_show() when tpm1_pcr_read() fails > > > tpm: print tpm2_commit_space() error inside tpm2_commit_space() > > > tpm: declare struct tpm_header > > > tpm: access command header through struct in tpm_try_transmit() > > > tpm: encapsulate tpm_dev_transmit() > > > tpm: clean up tpm_try_transmit() error handling flow > > > tpm: move tpm_validate_commmand() to tpm2-space.c > > > tpm: move TPM space code out of tpm_transmit() > > > tpm: remove @space from tpm_transmit() > > > tpm: use tpm_try_get_ops() in tpm-sysfs.c. > > > tpm: remove TPM_TRANSMIT_UNLOCKED flag > > > tpm: introduce tpm_chip_start() and tpm_chip_stop() > > > tpm: take TPM chip power gating out of tpm_transmit() > > > tpm: remove @flags from tpm_transmit() > > > > > > drivers/char/tpm/tpm-chip.c | 109 ++++++++++++ > > > drivers/char/tpm/tpm-dev-common.c | 44 ++++- > > > drivers/char/tpm/tpm-interface.c | 264 ++++++------------------------ > > > drivers/char/tpm/tpm-sysfs.c | 138 ++++++++++------ > > > drivers/char/tpm/tpm.h | 64 +++----- > > > drivers/char/tpm/tpm1-cmd.c | 28 +--- > > > drivers/char/tpm/tpm2-cmd.c | 72 +++----- > > > drivers/char/tpm/tpm2-space.c | 91 +++++++--- > > > drivers/char/tpm/tpm_i2c_atmel.c | 5 +- > > > drivers/char/tpm/tpm_vtpm_proxy.c | 12 +- > > > drivers/char/tpm/xen-tpmfront.c | 2 +- > > > 11 files changed, 408 insertions(+), 421 deletions(-) > > > > > > -- > > > 2.19.1 > > > > > > > Applied to master and next. > > Something in this series seems to break basic TPM communication for me. > > For TPM2.0s the probe command fails, causing them to be misdetected as > TPM1.2s: > > --- > tpm tpm0: tpm_try_transmit: tpm_send: error -5 > tpm_tis MSFT0101:00: 1.2 TPM (device-id 0x1A, rev-id 22) > tpm tpm0: A TPM error (30) occurred attempting to determine the timeouts > --- > tpm tpm0: tpm_try_transmit: tpm_send: error -5 > tpm_tis_spi spi0.1: 1.2 TPM (device-id 0x1B, rev-id 22) > tpm tpm0: A TPM error (30) occurred attempting to determine the timeouts > --- > > And for something that actually is a TPM1.2 it fails in a similar way: > > --- > tpm_i2c_infineon 1-0020: 1.2 TPM (device-id 0x1A) > tpm tpm0: A TPM error (-14) occurred attempting to determine the timeouts > --- > tpm tpm0: tpm_try_transmit: tpm_send: error -5 > tpm_tis_spi spi0.1: 1.2 TPM (device-id 0x1B, rev-id 16) > tpm tpm0: A TPM error (-14) occurred attempting to determine the timeouts > tpm_tis_spi: probe of spi0.1 failed with error -14 > --- > > I see this problem across my entire range of TPM devices and test platforms. > Any idea what could be wrong here? Weird. Can you run a bisect? /Jarkko
