* simplify code, remove duplicity
* ima_measurements.sh:
- add support for "ima-ng" and "ima-sig" IMA measurement templates
- add support for most of hash algorithms is defined in
include/uapi/linux/hash_info.h (kernel headers); algorithms are
detected from last occurance of tested file in
/sys/kernel/security/ima/ascii_runtime_measurements
- check i_version mount option only for ext[2-4] filesystems (other
filesystems don't report it), TCONF when not mounted with it
- XFS has iversion support from >= V5, TCONF when older version
- chown only UID (GID of nobody is different on some OS, so it's
better not to set it as it's not necessary for the test)
* ima_policy.sh:
- break tests instead of print TINFO when kernel is not configured to
enable multiple writes to the IMA policy (IMA_WRITE_POLICY)
- add warning when policy has been updated that reboot is needed
* ima_violations.sh:
- change check to measure occurrence of messages in log (previous way
to grep tail of the log was buggy) + add sleep when SUT uses
/var/log/messages to prevent failure during validate
* ima_tpm.sh
- change TCONF to TINFO in test1 (code behind that was never run)
- make variables local
* runtest file
- rename the test ids to match the shell script names (more descriptive)
and remove duplicate whitespace
Signed-off-by: Petr Vorel <pvorel@xxxxxxx>
---
Changes v1->v2:
I increased sleep to 1s I still occasionally encounter errors on systems
logging into /var/log/messages:
ima_violations 2 TFAIL: ToMToU not found in /var/log/messages
---
runtest/ima | 8 +-
.../integrity/ima/tests/ima_measurements.sh | 239 +++++++++++----------
.../security/integrity/ima/tests/ima_policy.sh | 148 ++++++-------
.../security/integrity/ima/tests/ima_setup.sh | 110 ++++------
.../kernel/security/integrity/ima/tests/ima_tpm.sh | 140 ++++++------
.../security/integrity/ima/tests/ima_violations.sh | 217 +++++++++----------
6 files changed, 409 insertions(+), 453 deletions(-)
mode change 100755 => 100644 testcases/kernel/security/integrity/ima/tests/ima_setup.sh
diff --git a/runtest/ima b/runtest/ima
index 251458af4..bcae16bb7 100644
--- a/runtest/ima
+++ b/runtest/ima
@@ -1,5 +1,5 @@
#DESCRIPTION:Integrity Measurement Architecture (IMA)
-ima01 ima_measurements.sh
-ima02 ima_policy.sh
-ima03 ima_tpm.sh
-ima04 ima_violations.sh
+ima_measurements ima_measurements.sh
+ima_policy ima_policy.sh
+ima_tpm ima_tpm.sh
+ima_violations ima_violations.sh
diff --git a/testcases/kernel/security/integrity/ima/tests/ima_measurements.sh b/testcases/kernel/security/integrity/ima/tests/ima_measurements.sh
index a3c357c8b..353e45b30 100755
--- a/testcases/kernel/security/integrity/ima/tests/ima_measurements.sh
+++ b/testcases/kernel/security/integrity/ima/tests/ima_measurements.sh
@@ -1,139 +1,156 @@
#!/bin/sh
-
-################################################################################
-## ##
-## Copyright (C) 2009 IBM Corporation ##
-## ##
-## This program is free software; you can redistribute it and#or modify ##
-## it under the terms of the GNU General Public License as published by ##
-## the Free Software Foundation; either version 2 of the License, or ##
-## (at your option) any later version. ##
-## ##
-## This program is distributed in the hope that it will be useful, but ##
-## WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY ##
-## or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ##
-## for more details. ##
-## ##
-## You should have received a copy of the GNU General Public License ##
-## along with this program; if not, write to the Free Software Foundation, ##
-## Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA ##
-## ##
-################################################################################
+# Copyright (c) 2009 IBM Corporation
+# Copyright (c) 2018 Petr Vorel <pvorel@xxxxxxx>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
#
-# File : ima_measurements.sh
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
#
-# Description: This file verifies measurements are added to the measurement
-# list based on policy.
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
#
-# Author: Mimi Zohar, zohar@xxxxxxxxxxxxxxxx
-################################################################################
-export TST_TOTAL=3
-export TCID="ima_measurements"
+# Author: Mimi Zohar, zohar@xxxxxxxxxxxxxxxx
+#
+# Verify that measurements are added to the measurement list based on policy.
+
+TST_TESTFUNC="test"
+TST_SETUP="init"
+TST_CNT=3
+TST_NEEDS_TMPDIR=1
+
+. ima_setup.sh
+
+DEFAULT_DIGEST_OLD_FORMAT="sha1"
+POLICY="$IMA_DIR/policy"
init()
{
- tst_check_cmds sha1sum
+ tst_check_cmds awk
- # verify using default policy
- if [ ! -f "$IMA_DIR/policy" ]; then
- tst_resm TINFO "not using default policy"
- fi
+ [ -f "$POLICY" ] || tst_res TINFO "not using default policy"
+
+ TEST_FILE="$PWD/test.txt"
+ DIGEST_INDEX=
+ grep -q "ima-ng" $ASCII_MEASUREMENTS && DIGEST_INDEX=1
+ grep -q "ima-sig" $ASCII_MEASUREMENTS && DIGEST_INDEX=2
}
-# Function: test01
-# Description - Verify reading a file causes a new measurement to
-# be added to the IMA measurement list.
-test01()
+# TODO: find support for rmd128 rmd256 rmd320 wp256 wp384 tgr128 tgr160
+compute_hash()
{
- # Create file test.txt
- cat > test.txt <<-EOF
- $(date) - this is a test file
- EOF
- if [ $? -ne 0 ]; then
- tst_brkm TBROK "Unable to create test file"
- fi
+ local digest="$1"
+ local file="$2"
- # Calculating the sha1sum of test.txt should add
- # the measurement to the measurement list.
- # (Assumes SHA1 IMA measurements.)
- hash=$(sha1sum "test.txt" | sed 's/ -//')
-
- # Check if the file is measured
- # (i.e. contained in the ascii measurement list.)
- cat /sys/kernel/security/ima/ascii_runtime_measurements > measurements
- sleep 1
- $(grep $hash measurements > /dev/null)
- if [ $? -ne 0 ]; then
- tst_resm TFAIL "TPM ascii measurement list does not contain sha1sum"
- else
- tst_resm TPASS "TPM ascii measurement list contains sha1sum"
- fi
+ hash="$(${digest}sum $file 2>/dev/null | cut -f1 -d ' ')"
+ [ -n "$hash" ] && { echo $hash; return; }
+
+ hash="$(openssl $digest $file 2>/dev/null | cut -f2 -d ' ')"
+ [ -n "$hash" ] && { echo $hash; return; }
+
+ # uncommon ciphers
+ local arg="$digest"
+ case "$digest" in
+ tgr192) arg="tiger" ;;
+ wp512) arg="whirlpool" ;;
+ esac
+
+ hash="$(rhash --$arg $file 2>/dev/null | cut -f1 -d ' ')"
+ [ -n "$hash" ] && { echo $hash; return; }
}
-# Function: test02
-# Description - Verify modifying, then reading, a file causes a new
-# measurement to be added to the IMA measurement list.
-test02()
+ima_check()
{
- # Modify test.txt
- echo $(date) - file modified >> test.txt
+ local digest="$DEFAULT_DIGEST_OLD_FORMAT"
+ local hash expected_hash line
+
+ # need to read file to get updated $ASCII_MEASUREMENTS
+ cat $TEST_FILE > /dev/null
- # Calculating the sha1sum of test.txt should add
- # the new measurement to the measurement list
- hash=$(sha1sum test.txt | sed 's/ -//')
+ line="$(grep $TEST_FILE $ASCII_MEASUREMENTS | tail -1)"
+ [ -n "$line" ] || tst_res TFAIL "cannot find measurement for '$TEST_FILE'"
- # Check if the new measurement exists
- cat /sys/kernel/security/ima/ascii_runtime_measurements > measurements
- $(grep $hash measurements > /dev/null)
+ [ "$DIGEST_INDEX" ] && digest="$(echo "$line" | awk '{print $(NF-'$DIGEST_INDEX')}' | cut -d ':' -f 1)"
+ hash="$(echo "$line" | awk '{print $(NF-1)}' | cut -d ':' -f 2)"
- if [ $? -ne 0 ]; then
- tst_resm TFAIL "Modified file not measured"
- tst_resm TINFO "iversion not supported; or not mounted with iversion"
+ tst_res TINFO "computing hash for $digest digest"
+ expected_hash="$(compute_hash $digest $TEST_FILE)" || \
+ { tst_res TCONF "cannot compute hash for '$digest' digest"; return; }
+
+ if [ "$hash" = "$expected_hash" ]; then
+ tst_res TPASS "correct hash found"
else
- tst_resm TPASS "Modified file measured"
+ tst_res TFAIL "hash not found"
fi
}
-# Function: test03
-# Description - Verify files are measured based on policy
-# (Default policy does not measure user files.)
-test03()
+test1()
{
- # create file user-test.txt
- mkdir -m 0700 user
- chown nobody.nobody user
- cd user
- hash=0
-
- # As user nobody, create and cat the new file
- # (The LTP tests assumes existence of 'nobody'.)
- sudo -n -u nobody sh -c "echo $(date) - create test.txt > ./test.txt;
- cat ./test.txt > /dev/null"
-
- # Calculating the hash will add the measurement to the measurement
- # list, so only calc the hash value after getting the measurement
- # list.
- cat /sys/kernel/security/ima/ascii_runtime_measurements > measurements
- hash=$(sha1sum test.txt | sed 's/ -//')
- cd - >/dev/null
-
- # Check if the file is measured
- grep $hash measurements > /dev/null
- if [ $? -ne 0 ]; then
- tst_resm TPASS "user file test.txt not measured"
- else
- tst_resm TFAIL "user file test.txt measured"
- fi
+ tst_res TINFO "verify adding record to the IMA measurement list"
+ ROD echo "$(date) this is a test file" \> $TEST_FILE
+ ima_check
}
-. ima_setup.sh
+test2()
+{
+ local device mount fs
+
+ tst_res TINFO "verify updating record in the IMA measurement list"
+
+ device="$(df . | sed -e 1d | cut -f1 -d ' ')"
+ mount="$(grep $device /proc/mounts | head -1)"
+ fs="$(echo $mount | awk '{print $3'})"
+
+ case "$fs" in
+ ext[2-4])
+ if ! echo "$mount" | grep -q -w "i_version"; then
+ tst_res TCONF "device '$device' is not mounted with iversion, please mount it with 'mount $device -o remount,iversion'"
+ return
+ fi
+ ;;
+ xfs)
+ if dmesg | grep -q "XFS.*Mounting V[1-4] Filesystem"; then
+ tst_res TCONF "XFS Filesystem >= V5 required for iversion support"
+ return
+ fi
+ ;;
+ '')
+ tst_res TWARN "could not find mount info for device '$device'"
+ ;;
+ esac
+
+ ROD echo "$(date) modified file" \> $TEST_FILE
+ ima_check
+}
+
+test3()
+{
+ local user="nobody"
+ local dir="$PWD/user"
+ local file="$dir/test.txt"
-setup
-TST_CLEANUP=cleanup
+ # Default policy does not measure user files
+ tst_res TINFO "verify not measuring user files"
-init
-test01
-test02
-test03
+ if ! id $user >/dev/null 2>/dev/null; then
+ tst_res TCONF "missing system user $user (wrong installation)"
+ return
+ fi
+ tst_check_cmds sudo
+
+ mkdir -m 0700 $dir
+ chown $user $dir
+ cd $dir
+ # need to read file to get updated $ASCII_MEASUREMENTS
+ sudo -n -u $user sh -c "echo $(date) user file > $file; cat $file > /dev/null"
+ cd ..
+
+ EXPECT_FAIL "grep $file $ASCII_MEASUREMENTS"
+}
-tst_exit
+tst_run
diff --git a/testcases/kernel/security/integrity/ima/tests/ima_policy.sh b/testcases/kernel/security/integrity/ima/tests/ima_policy.sh
index ad5900975..08e34c6f8 100755
--- a/testcases/kernel/security/integrity/ima/tests/ima_policy.sh
+++ b/testcases/kernel/security/integrity/ima/tests/ima_policy.sh
@@ -1,127 +1,115 @@
#!/bin/sh
-################################################################################
-## ##
-## Copyright (C) 2009 IBM Corporation ##
-## ##
-## This program is free software; you can redistribute it and#or modify ##
-## it under the terms of the GNU General Public License as published by ##
-## the Free Software Foundation; either version 2 of the License, or ##
-## (at your option) any later version. ##
-## ##
-## This program is distributed in the hope that it will be useful, but ##
-## WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY ##
-## or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ##
-## for more details. ##
-## ##
-## You should have received a copy of the GNU General Public License ##
-## along with this program; if not, write to the Free Software ##
-## Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA ##
-## ##
-################################################################################
+# Copyright (c) 2009 IBM Corporation
+# Copyright (c) 2018 Petr Vorel <pvorel@xxxxxxx>
#
-# File : ima_policy.sh
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
#
-# Description: This file tests replacing the default integrity measurement
-# policy.
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
#
-# Author: Mimi Zohar, zohar@xxxxxxxxxxxxxxxx
-################################################################################
-export TST_TOTAL=3
-export TCID="ima_policy"
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+# Author: Mimi Zohar, zohar@xxxxxxxxxxxxxxxx
+#
+# Test replacing the default integrity measurement policy.
+
+TST_TESTFUNC="test"
+TST_SETUP="init"
+TST_CNT=3
+
+. ima_setup.sh
init()
{
- # verify using default policy
- IMA_POLICY=$IMA_DIR/policy
- if [ ! -f $IMA_POLICY ]; then
- tst_resm TINFO "default policy already replaced"
- fi
+ IMA_POLICY="$IMA_DIR/policy"
+ [ -f $IMA_POLICY ] || \
+ tst_brk TCONF "IMA policy already loaded and kernel not configured to enable multiple writes it"
- VALID_POLICY=$LTPROOT/testcases/data/ima_policy/measure.policy
- if [ ! -f $VALID_POLICY ]; then
- tst_resm TINFO "missing $VALID_POLICY"
- fi
+ VALID_POLICY="$TST_DATAROOT/measure.policy"
+ [ -f $VALID_POLICY ] || tst_brk TCONF "missing $VALID_POLICY"
- INVALID_POLICY=$LTPROOT/testcases/data/ima_policy/measure.policy-invalid
- if [ ! -f $INVALID_POLICY ]; then
- tst_resm TINFO "missing $INVALID_POLICY"
- fi
+ INVALID_POLICY="$TST_DATAROOT/measure.policy-invalid"
+ [ -f $INVALID_POLICY ] || tst_brk TCONF "missing $INVALID_POLICY"
}
load_policy()
{
+ local ret
+
exec 2>/dev/null 4>$IMA_POLICY
- if [ $? -ne 0 ]; then
- exit 1
- fi
+ [ $? -eq 0 ] || exit 1
cat $1 |
- while read line ; do
- {
- if [ "${line#\#}" = "${line}" ] ; then
- echo $line >&4 2> /dev/null
+ while read line; do
+ if [ "${line#\#}" = "${line}" ]; then
+ echo "$line" >&4 2> /dev/null
if [ $? -ne 0 ]; then
exec 4>&-
return 1
fi
fi
- }
done
-}
+ ret=$?
+ [ $ret -eq 0 ] && \
+ tst_res TINFO "IMA policy updated, please reboot after testing to restore settings"
-# Function: test01
-# Description - Verify invalid policy doesn't replace default policy.
-test01()
+ return $ret
+}
+
+test1()
{
+ tst_res TINFO "verify that invalid policy doesn't replace default policy"
+
+ local p1
+
load_policy $INVALID_POLICY & p1=$!
wait "$p1"
if [ $? -ne 0 ]; then
- tst_resm TPASS "didn't load invalid policy"
+ tst_res TPASS "didn't load invalid policy"
else
- tst_resm TFAIL "loaded invalid policy"
+ tst_res TFAIL "loaded invalid policy"
fi
}
-# Function: test02
-# Description - Verify policy file is opened sequentially, not concurrently
-# and install new policy
-test02()
+test2()
{
+ tst_res TINFO "verify that policy file is opened sequentially and installs new policy"
+
+ local p1 p2 rc1 rc2
+
load_policy $VALID_POLICY & p1=$! # forked process 1
load_policy $VALID_POLICY & p2=$! # forked process 2
- wait "$p1"; RC1=$?
- wait "$p2"; RC2=$?
- if [ $RC1 -eq 0 ] && [ $RC2 -eq 0 ]; then
- tst_resm TFAIL "measurement policy opened concurrently"
- elif [ $RC1 -eq 0 ] || [ $RC2 -eq 0 ]; then
- tst_resm TPASS "replaced default measurement policy"
+ wait "$p1"; rc1=$?
+ wait "$p2"; rc2=$?
+ if [ $rc1 -eq 0 ] && [ $rc2 -eq 0 ]; then
+ tst_res TFAIL "measurement policy opened concurrently"
+ elif [ $rc1 -eq 0 ] || [ $rc2 -eq 0 ]; then
+ tst_res TPASS "replaced default measurement policy"
else
- tst_resm TFAIL "problems opening measurement policy"
+ tst_res TFAIL "problems opening measurement policy"
fi
}
-# Function: test03
-# Description - Verify can't load another measurement policy.
-test03()
+test3()
{
+ tst_res TINFO "verify that valid policy isn't replaced"
+
+ local p1
+
load_policy $INVALID_POLICY & p1=$!
wait "$p1"
if [ $? -ne 0 ]; then
- tst_resm TPASS "didn't replace valid policy"
+ tst_res TPASS "didn't replace valid policy"
else
- tst_resm TFAIL "replaced valid policy"
+ tst_res TFAIL "replaced valid policy"
fi
}
-. ima_setup.sh
-
-setup
-TST_CLEANUP=cleanup
-
-init
-test01
-test02
-test03
-
-tst_exit
+tst_run
diff --git a/testcases/kernel/security/integrity/ima/tests/ima_setup.sh b/testcases/kernel/security/integrity/ima/tests/ima_setup.sh
old mode 100755
new mode 100644
index 0ff38d23b..1a2df154d
--- a/testcases/kernel/security/integrity/ima/tests/ima_setup.sh
+++ b/testcases/kernel/security/integrity/ima/tests/ima_setup.sh
@@ -1,86 +1,68 @@
#!/bin/sh
-################################################################################
-## ##
-## Copyright (C) 2009 IBM Corporation ##
-## ##
-## This program is free software; you can redistribute it and#or modify ##
-## it under the terms of the GNU General Public License as published by ##
-## the Free Software Foundation; either version 2 of the License, or ##
-## (at your option) any later version. ##
-## ##
-## This program is distributed in the hope that it will be useful, but ##
-## WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY ##
-## or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ##
-## for more details. ##
-## ##
-## You should have received a copy of the GNU General Public License ##
-## along with this program; if not, write to the Free Software Foundation, ##
-## Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA ##
-## ##
-################################################################################
+# Copyright (c) 2009 IBM Corporation
+# Copyright (c) 2018 Petr Vorel <pvorel@xxxxxxx>
#
-# File : ima_setup.sh
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
#
-# Description: setup/cleanup routines for the integrity tests.
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
#
-# Author: Mimi Zohar, zohar@xxxxxxxxxxxxxxxx
-################################################################################
-. test.sh
-mount_sysfs()
-{
- SYSFS=$(mount 2>/dev/null | awk '$5 == "sysfs" { print $3 }')
- if [ "x$SYSFS" = x ] ; then
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+# Author: Mimi Zohar, zohar@xxxxxxxxxxxxxxxx
- SYSFS=/sys
+TST_CLEANUP="cleanup"
+TST_NEEDS_TMPDIR=1
+TST_NEEDS_ROOT=1
- test -d $SYSFS || mkdir -p $SYSFS 2>/dev/null
- if [ $? -ne 0 ] ; then
- tst_brkm TBROK "Failed to mkdir $SYSFS"
- fi
- if ! mount -t sysfs sysfs $SYSFS 2>/dev/null ; then
- tst_brkm TBROK "Failed to mount $SYSFS"
- fi
+. tst_test.sh
- fi
-}
+export TCID="${TCID:-$(basename $0 | cut -d. -f1)}"
-mount_securityfs()
-{
- SECURITYFS=$(mount 2>/dev/null | awk '$5 == "securityfs" { print $3 }')
- if [ "x$SECURITYFS" = x ] ; then
+SYSFS="/sys"
+UMOUNT=
- SECURITYFS="$SYSFS/kernel/security"
+mount_helper()
+{
+ local type="$1"
+ local default_dir="$2"
+ local dir
- test -d $SECURITYFS || mkdir -p $SECURITYFS 2>/dev/null
- if [ $? -ne 0 ] ; then
- tst_brkm TBROK "Failed to mkdir $SECURITYFS"
- fi
- if ! mount -t securityfs securityfs $SECURITYFS 2>/dev/null ; then
- tst_brkm TBROK "Failed to mount $SECURITYFS"
- fi
+ dir="$(grep ^$type /proc/mounts | cut -d ' ' -f2 | head -1)"
+ [ -n "$dir" ] && { echo "$dir"; return; }
+ if ! mkdir -p $default_dir; then
+ tst_brk TBROK "Failed to create $default_dir"
fi
+ if ! mount -t $type $type $default_dir; then
+ tst_brk TBROK "Failed to mount $type"
+ fi
+ UMOUNT="$default_dir $UMOUNT"
+ echo $default_dir
}
setup()
{
- tst_require_root
-
- tst_tmpdir
-
- mount_sysfs
+ SECURITYFS="$(mount_helper securityfs $SYSFS/kernel/security)"
- # mount securityfs if it is not already mounted
- mount_securityfs
-
- # IMA must be configured in the kernel
- IMA_DIR=$SECURITYFS/ima
- if [ ! -d "$IMA_DIR" ]; then
- tst_brkm TCONF "IMA not enabled in kernel"
- fi
+ IMA_DIR="$SECURITYFS/ima"
+ [ -d "$IMA_DIR" ] || tst_brk TCONF "IMA not enabled in kernel"
+ ASCII_MEASUREMENTS="$IMA_DIR/ascii_runtime_measurements"
+ BINARY_MEASUREMENTS="$IMA_DIR/binary_runtime_measurements"
}
cleanup()
{
- tst_rmdir
+ local dir
+ for dir in $UMOUNT; do
+ umount $dir
+ done
}
+
+setup
diff --git a/testcases/kernel/security/integrity/ima/tests/ima_tpm.sh b/testcases/kernel/security/integrity/ima/tests/ima_tpm.sh
index 333bf5f8a..e78926165 100755
--- a/testcases/kernel/security/integrity/ima/tests/ima_tpm.sh
+++ b/testcases/kernel/security/integrity/ima/tests/ima_tpm.sh
@@ -1,70 +1,63 @@
#!/bin/sh
-
-################################################################################
-## ##
-## Copyright (C) 2009 IBM Corporation ##
-## ##
-## This program is free software; you can redistribute it and#or modify ##
-## it under the terms of the GNU General Public License as published by ##
-## the Free Software Foundation; either version 2 of the License, or ##
-## (at your option) any later version. ##
-## ##
-## This program is distributed in the hope that it will be useful, but ##
-## WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY ##
-## or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ##
-## for more details. ##
-## ##
-## You should have received a copy of the GNU General Public License ##
-## along with this program; if not, write to the Free Software ##
-## Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA ##
-## ##
-################################################################################
+# Copyright (c) 2009 IBM Corporation
+# Copyright (c) 2018 Petr Vorel <pvorel@xxxxxxx>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
#
-# File : ima_tpm.sh
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
#
-# Description: This file verifies the boot and PCR aggregates
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
#
-# Author: Mimi Zohar, zohar@xxxxxxxxxxxxxxxx
+# Author: Mimi Zohar, zohar@xxxxxxxxxxxxxxxx
#
-# Return - zero on success
-# - non zero on failure. return value from commands ($RC)
-################################################################################
-export TST_TOTAL=3
-export TCID="ima_tpm"
+# Verify the boot and PCR aggregates.
+
+TST_TESTFUNC="test"
+TST_SETUP="init"
+TST_CNT=3
+
+. ima_setup.sh
init()
{
tst_check_cmds ima_boot_aggregate ima_measure
}
-# Function: test01
-# Description - Verify boot aggregate value is correct
-test01()
+test1()
{
- zero="0000000000000000000000000000000000000000"
+ tst_res TINFO "verify boot aggregate"
+
+ local zero="0000000000000000000000000000000000000000"
+ local tpm_bios="$SECURITYFS/tpm0/binary_bios_measurements"
+ local ima_measurements="$ASCII_MEASUREMENTS"
+ local boot_aggregate boot_hash ima_hash line
# IMA boot aggregate
- ima_measurements=$SECURITYFS/ima/ascii_runtime_measurements
read line < $ima_measurements
- ima_aggr=$(expr substr "${line}" 49 40)
+ ima_hash=$(expr substr "${line}" 49 40)
- # verify TPM is available and enabled.
- tpm_bios=$SECURITYFS/tpm0/binary_bios_measurements
if [ ! -f "$tpm_bios" ]; then
- tst_brkm TCONF "TPM not builtin kernel, or TPM not enabled"
+ tst_res TINFO "TPM not builtin kernel, or TPM not enabled"
- if [ "${ima_aggr}" = "${zero}" ]; then
- tst_resm TPASS "bios boot aggregate is 0."
+ if [ "${ima_hash}" = "${zero}" ]; then
+ tst_res TPASS "bios boot aggregate is 0"
else
- tst_resm TFAIL "bios boot aggregate is not 0."
+ tst_res TFAIL "bios boot aggregate is not 0"
fi
else
boot_aggregate=$(ima_boot_aggregate $tpm_bios)
- boot_aggr=$(expr substr $boot_aggregate 16 40)
- if [ "x${ima_aggr}" = "x${boot_aggr}" ]; then
- tst_resm TPASS "bios aggregate matches IMA boot aggregate."
+ boot_hash=$(expr substr $boot_aggregate 16 40)
+ if [ "${ima_hash}" = "${boot_hash}" ]; then
+ tst_res TPASS "bios aggregate matches IMA boot aggregate"
else
- tst_resm TFAIL "bios aggregate does not match IMA boot aggregate."
+ tst_res TFAIL "bios aggregate does not match IMA boot aggregate"
fi
fi
}
@@ -74,64 +67,53 @@ test01()
# the PCR values from /sys/devices.
validate_pcr()
{
- ima_measurements=$SECURITYFS/ima/binary_runtime_measurements
- aggregate_pcr=$(ima_measure $ima_measurements --validate)
- dev_pcrs=$1
- RC=0
+ tst_res TINFO "verify PCR (Process Control Register)"
- while read line ; do
+ local ima_measurements="$BINARY_MEASUREMENTS"
+ local aggregate_pcr="$(ima_measure $ima_measurements --validate)"
+ local dev_pcrs="$1"
+ local ret=0
+
+ while read line; do
pcr=$(expr substr "${line}" 1 6)
if [ "${pcr}" = "PCR-10" ]; then
aggr=$(expr substr "${aggregate_pcr}" 26 59)
pcr=$(expr substr "${line}" 9 59)
- [ "${pcr}" = "${aggr}" ] || RC=$?
+ [ "${pcr}" = "${aggr}" ] || ret=$?
fi
done < $dev_pcrs
- return $RC
+ return $ret
}
-# Function: test02
-# Description - Verify ima calculated aggregate PCR values matches
-# actual PCR value.
-test02()
+test2()
{
+ tst_res TINFO "verify PCR values"
- # Would be nice to know where the PCRs are located. Is this safe?
- PCRS_PATH=$(find /$SYSFS/devices/ | grep pcrs)
+ # Would be nice to know where the PCRs are located. Is this safe?
+ local pcrs_path="$(find $SYSFS/devices/ | grep pcrs)"
if [ $? -eq 0 ]; then
- validate_pcr $PCRS_PATH
+ validate_pcr $pcrs_path
if [ $? -eq 0 ]; then
- tst_resm TPASS "aggregate PCR value matches real PCR value."
+ tst_res TPASS "aggregate PCR value matches real PCR value"
else
- tst_resm TFAIL "aggregate PCR value does not match real PCR value."
+ tst_res TFAIL "aggregate PCR value does not match real PCR value"
fi
else
- tst_resm TFAIL "TPM not enabled, no PCR value to validate"
+ tst_res TFAIL "TPM not enabled, no PCR value to validate"
fi
}
-# Function: test03
-# Description - Verify template hash value for IMA entry is correct.
-test03()
+test3()
{
+ tst_res TINFO "verify template hash value"
- ima_measurements=$SECURITYFS/ima/binary_runtime_measurements
- aggregate_pcr=$(ima_measure $ima_measurements --verify --validate) > /dev/null
+ local ima_measurements="$BINARY_MEASUREMENTS"
+ ima_measure $ima_measurements --verify --validate
if [ $? -eq 0 ]; then
- tst_resm TPASS "verified IMA template hash values."
+ tst_res TPASS "verified IMA template hash values"
else
- tst_resm TFAIL "error verifing IMA template hash values."
+ tst_res TFAIL "error verifing IMA template hash values"
fi
}
-. ima_setup.sh
-
-setup
-TST_CLEANUP=cleanup
-
-init
-test01
-test02
-test03
-
-tst_exit
+tst_run
diff --git a/testcases/kernel/security/integrity/ima/tests/ima_violations.sh b/testcases/kernel/security/integrity/ima/tests/ima_violations.sh
index 1b86b5f1a..879b6e949 100755
--- a/testcases/kernel/security/integrity/ima/tests/ima_violations.sh
+++ b/testcases/kernel/security/integrity/ima/tests/ima_violations.sh
@@ -1,44 +1,49 @@
#!/bin/sh
-################################################################################
-## ##
-## Copyright (C) 2009 IBM Corporation ##
-## ##
-## This program is free software; you can redistribute it and#or modify ##
-## it under the terms of the GNU General Public License as published by ##
-## the Free Software Foundation; either version 2 of the License, or ##
-## (at your option) any later version. ##
-## ##
-## This program is distributed in the hope that it will be useful, but ##
-## WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY ##
-## or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ##
-## for more details. ##
-## ##
-## You should have received a copy of the GNU General Public License ##
-## along with this program; if not, write to the Free Software ##
-## Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA ##
-## ##
-################################################################################
+# Copyright (c) 2009 IBM Corporation
+# Copyright (c) 2018 Petr Vorel <pvorel@xxxxxxx>
#
-# File : ima_violations.sh
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
#
-# Description: This file tests ToMToU and open_writer violations invalidate
-# the PCR and are logged.
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
#
-# Author: Mimi Zohar, zohar@xxxxxxxxxxxxxxxx
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
#
-# Return - zero on success
-# - non zero on failure. return value from commands ($RC)
-################################################################################
+# Author: Mimi Zohar, zohar@xxxxxxxxxxxxxxxx
+#
+# Test whether ToMToU and open_writer violations invalidatethe PCR and are logged.
-export TST_TOTAL=3
-export TCID="ima_violations"
+TST_TESTFUNC="test"
+TST_SETUP="init"
+TST_CNT=3
-open_file_read()
+. ima_setup.sh
+
+. daemonlib.sh
+
+FILE="test.txt"
+IMA_VIOLATIONS="$SECURITYFS/ima/violations"
+
+init()
{
- exec 3< $1
- if [ $? -ne 0 ]; then
- exit 1
+ LOG="/var/log/messages"
+ SLEEP="1s"
+ if status_daemon auditd; then
+ LOG="/var/log/audit/audit.log"
+ SLEEP=
fi
+ tst_res TINFO "using log $LOG"
+}
+
+open_file_read()
+{
+ exec 3< $FILE || exit 1
}
close_file_read()
@@ -48,11 +53,8 @@ close_file_read()
open_file_write()
{
- exec 4> $1
- if [ $? -ne 0 ]; then
- exit 1
- echo 'testing, testing, ' >&4
- fi
+ exec 4> $FILE || exit 1
+ echo 'test writing' >&4
}
close_file_write()
@@ -60,103 +62,88 @@ close_file_write()
exec 4>&-
}
-init()
+get_count()
{
- service auditd status > /dev/null 2>&1
- if [ $? -ne 0 ]; then
- log=/var/log/messages
- else
- log=/var/log/audit/audit.log
- tst_resm TINFO "requires integrity auditd patch"
- fi
-
- ima_violations=$SECURITYFS/ima/violations
+ local search="$1"
+ echo $(grep -c "${search}.*${FILE}" $LOG)
}
-# Function: test01
-# Description - Verify open writers violation
-test01()
+validate()
{
- read num_violations < $ima_violations
-
- TMPFN=test.txt
- open_file_write $TMPFN
- open_file_read $TMPFN
- close_file_read
- close_file_write
- read num_violations_new < $ima_violations
- num=$(($(expr $num_violations_new - $num_violations)))
- if [ $num -gt 0 ]; then
- tail $log | grep test.txt | grep -q 'open_writers'
- if [ $? -eq 0 ]; then
- tst_resm TPASS "open_writers violation added(test.txt)"
+ local num_violations="$1"
+ local count="$2"
+ local search="$3"
+ local count2="$(get_count $search)"
+ local num_violations_new
+
+ [ -n "$SLEEP" ] && tst_sleep $SLEEP
+
+ read num_violations_new < $IMA_VIOLATIONS
+ if [ $(($num_violations_new - $num_violations)) -gt 0 ]; then
+ if [ $count2 -gt $count ]; then
+ tst_res TPASS "$search violation added"
else
- tst_resm TFAIL "(message ratelimiting?)"
+ tst_res TFAIL "$search not found in $LOG"
fi
else
- tst_resm TFAIL "open_writers violation not added(test.txt)"
+ tst_res TFAIL "$search violation not added"
fi
}
-# Function: test02
-# Description - Verify ToMToU violation
-test02()
+test1()
{
- read num_violations < $ima_violations
+ tst_res TINFO "verify open writers violation"
- TMPFN=test.txt
- open_file_read $TMPFN
- open_file_write $TMPFN
- close_file_write
+ local search="open_writers"
+ local count num_violations
+
+ read num_violations < $IMA_VIOLATIONS
+ count="$(get_count $search)"
+
+ open_file_write
+ open_file_read
close_file_read
- read num_violations_new < $ima_violations
- num=$(($(expr $num_violations_new - $num_violations)))
- if [ $num -gt 0 ]; then
- tail $log | grep test.txt | grep -q 'ToMToU'
- if [ $? -eq 0 ]; then
- tst_resm TPASS "ToMToU violation added(test.txt)"
- else
- tst_resm TFAIL "(message ratelimiting?)"
- fi
- else
- tst_resm TFAIL "ToMToU violation not added(test.txt)"
- fi
+ close_file_write
+
+ validate $num_violations $count $search
}
-# Function: test03
-# Description - verify open_writers using mmapped files
-test03()
+test2()
{
- read num_violations < $ima_violations
-
- TMPFN=test.txtb
- echo 'testing testing ' > $TMPFN
- ima_mmap $TMPFN & p1=$!
- sleep 1 # got to wait for ima_mmap to mmap the file
- open_file_read $TMPFN
- read num_violations_new < $ima_violations
- num=$(($(expr $num_violations_new - $num_violations)))
- if [ $num -gt 0 ]; then
- tail $log | grep test.txtb | grep -q 'open_writers'
- if [ $? -eq 0 ]; then
- tst_resm TPASS "mmapped open_writers violation added(test.txtb)"
- else
- tst_resm TFAIL "(message ratelimiting?)"
- fi
- else
- tst_resm TFAIL "mmapped open_writers violation not added(test.txtb)"
- fi
+ tst_res TINFO "verify ToMToU violation"
+
+ local search="ToMToU"
+ local count num_violations
+
+ read num_violations < $IMA_VIOLATIONS
+ count="$(get_count $search)"
+
+ open_file_read
+ open_file_write
+ close_file_write
close_file_read
+
+ validate $num_violations $count $search
}
-. ima_setup.sh
+test3()
+{
+ tst_res TINFO "verify open_writers using mmapped files"
-setup
-TST_CLEANUP=cleanup
+ local search="open_writers"
+ local count num_violations
-init
-test01
-test02
-test03
+ read num_violations < $IMA_VIOLATIONS
+ count="$(get_count $search)"
+
+ echo 'testing testing ' > $FILE
+ ima_mmap $FILE &
+ tst_sleep 1s
+
+ open_file_read
+ close_file_read
+
+ validate $num_violations $count $search
+}
-tst_exit
+tst_run
--
2.16.2
