Re: [RFC PATCH 2/4] ima: fail signature verification on unprivileged & untrusted filesystems

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, 2018-02-17 at 08:20 -0600, Eric W. Biederman wrote:
> Mimi Zohar <zohar@xxxxxxxxxxxxxxxxxx> writes:
> 
> > On Fri, 2018-02-16 at 11:48 -0600, Eric W. Biederman wrote:
> >> Mimi Zohar <zohar@xxxxxxxxxxxxxxxxxx> writes:
> >> 
> >> > On Thu, 2018-02-15 at 10:47 -0600, Eric W. Biederman wrote:
> >> >> Mimi Zohar <zohar@xxxxxxxxxxxxxxxxxx> writes:
> >> >> 
> >> >> > On Wed, 2018-02-14 at 17:57 -0600, Eric W. Biederman wrote:
> >> >> >> Mimi Zohar <zohar@xxxxxxxxxxxxxxxxxx> writes:
> >> >> >> 
> >> >> >> > Files on untrusted filesystems, such as fuse, can change at any time,
> >> >> >> > making the measurement(s) and by extension signature verification
> >> >> >> > meaningless.
> >> >> >> >
> >> >> >> > FUSE can be mounted by unprivileged users either today with fusermount
> >> >> >> > installed with setuid, or soon with the upcoming patches to allow FUSE
> >> >> >> > mounts in a non-init user namespace.
> >> >> >> >
> >> >> >> > This patch always fails the file signature verification on unprivileged
> >> >> >> > and untrusted filesystems.  To also fail file signature verification on
> >> >> >> > privileged, untrusted filesystems requires a custom policy.
> >> >> >> >
> >> >> >> > (This patch is based on Alban Crequy's use of fs_flags and patch
> >> >> >> >  description.)
> >> >> >> 
> >> >> >> This would be much better done based on a flag in s_iflags and then the
> >> >> >> mounts that need this can set this.  That new flag can perhaps be called
> >> >> >> SB_I_IMA_FAIL.
> >> >> >> 
> >> >> >> Among other things that should allow the policy of when to set this to
> >> >> >> be set in fuse where it is obvious rather than in an magic location in
> >> >> >> IMA.
> >> >> >
> >> >> > Using s_iflags instead of fs_flags is fine, but I'm not sure how this
> >> >> > affects the IMA policy.  This patch set assumes only unprivileged,
> >> >> > untrusted filesytems can automatically fail file signature
> >> >> > verification (2nd patch), as that hasn't yet been upstreamed and won't
> >> >> > break userspace.
> >> >> >
> >> >> > Based on policy, IMA should additionally be able to fail the signature
> >> >> > verification for files on privileged, untrusted filesystems.
> >> >> 
> >> >> Apologies ima has a very specific meaning of policy, as in the loaded
> >> >> ima policy.  I was meaning the hard coded policy of which filesystems
> >> >> we simply would not trust by default.
> >> >> 
> >> >> In code terms what I was thinking would look something like:
> >> >> 
> >> >> diff --git a/security/integrity/ima/ima_appraise.c b/security/integrity/ima/ima_appraise.c
> >> >> --- a/security/integrity/ima/ima_appraise.c
> >> >> +++ b/security/integrity/ima/ima_appraise.c
> >> >> @@ -292,7 +292,14 @@ int ima_appraise_measurement(enum ima_hooks func,
> >> >>  	}
> >> >>   
> >> >>  out:
> >> >> -	if (status != INTEGRITY_PASS) {
> >> >> +	/* Fail if we can't trust the fs enough to support ima xattrs (FUSE) */
> >> >> +	if (inode->i_sb->s_iflags & SB_I_NOIMA) {
> >> >> +		status = INTEGRITY_FAIL;
> >> >> +		cause = "untrusted-filesystem";
> >> >> +		integrity_audit_msg(AUDIT_INTEGRITY_DATA, inode, filename,
> >> >> +				    op, cause, rc, 0);
> >> >> +	} else if (status != INTEGRITY_PASS) {
> >> >>  		if ((ima_appraise & IMA_APPRAISE_FIX) &&
> >> >>  		    (!xattr_value ||
> >> >>   		     xattr_value->type != EVM_IMA_XATTR_DIGSIG)) {
> >> >> 
> >> >> And somewhere in the fuse mount code it would say:
> >> >> 
> >> >> 	if (sb->s_user_ns != &init_user_ns)
> >> >>         	sb->s_iflags |= SB_I_NOIMA);
> >> >
> >> > SB_I_NOIMA would be really confusing, as we're not disabling IMA in
> >> > general, just failing the signature verification.  The measurement,
> >> > even if it is meaningless, is an indication in the measurement list
> >> > that the file was accessed/executed.
> >> >
> >> > I would propose naming the flag SB_I_IMA_UNTRUSTED, meaning the kernel
> >> > is unaware of fs changes.
> >> 
> >> Fair enough on the naming.  You understand the nuiances the better than
> >> I.
> >> 
> >> 
> >> >> The point being that the logic for setting the flag can live in fuse or
> >> >> a simpler filesystem and all ima proper needs to do is deal with the flag being
> >> >> set.  That should be easier to maintainer and simpler to code all
> >> >> around.
> >> >
> >> > The last patch (4/4) had 1 line, which set the fs_flags
> >> > unconditionally in fuse_fs_type.  Instead, we can set the sb->s_iflags 
> >> > in fuse_fill_supper(), again unconditionally, letting IMA-appraisal
> >> > differentiate between privileged and unprivileged.
> >> 
> >> I really think that is a bad way to structure the code.
> >> 
> >> I strongly suspect when everything settles down the test needs to be:
> >> 
> >> 	if (!fc->allow_other || (sb->s_user_ns != &init_user_ns))
> >>         	sb->s_iflags |= SB_I_IMA_UNTRUSTED;
> >> 
> >> fc->allow_other is only set on a very trusted mount of fuse.
> >> 
> >> Or it might be that fuse decides that breaking it's users by default is
> >> a good idea and always sets SB_I_IMA_UNTRUSTED.  Unless a new mount
> >> option is specified.
> >> 
> >> How much trust we place in the file server in general is a fuse specific
> >> problem, that the fuse kernel code should handle.  So half of the test
> >> should not reside in IMA and half of the test in the fuse filesystem
> >> code.
> >> 
> >> The test should reside in fuse and the IMA code should honor it.
> >
> > This would all make a lot of sense if the privileged use case was
> > really trusted, but it isn't.  We're just not automatically failing
> > the signature verification, because it "might" break existing
> > userspace.
> >
> > This now puts the burden of knowing which file systems are inherently
> > not trusted on the IMA custom policy writer, requiring separate per
> > file system type or name rules. 
> >
> > The current code first checks to see if the filesystem is untrusted,
> > before failing the signature verification.  So existing generic policy
> > rules could be rewritten, by simply appending "fail" to them.
> 
> Ugh.  That does seem to be writing the code the wrong way around to
> avoid the wrath of Linus.

Linus doesn't have anything to do with this.  I'm the one trying to
differentiate between non-init unprivileged mounts, which hasn't yet
been upstreamed, from the setuid unprivileged and privileged mounts.

I've just posted v1 of this patch set, which is simpler and,
hopefully, clearer.

Mimi

> 
> >> I suspect for nfs the situation will be different.  By default we will
> >> trust the server but there will be situations we don't want to and
> >> having a mount option that changes that default would be nice.  (Plus
> >> maybe someday unprivileged nfs mounts that we never want to trust).
> >> 
> >> I can also see making decisions like this based on the question are the
> >> network transfers authenticated aka signed.
> >
> > At least for the time being, remote file systems are untrusted.  The
> > main use case for IMA has been in the embedded environment.
> 
> Then just set SB_I_IMA_UNTRUSTED on all of the remote filesystems.  One
> patch per.  You know it people aren't doing that.  Tell Linus you know
> no one is doing that, and revert the patch if someone reports a
> regression.
> 
> If you would like I can carry the patches in my tree (with your
> signed-off-by) and I can tell Linus's for you.
> 
> Linus has yelled at me in the past for making code overly complicated to
> avoid the potential for regression when we know no one in that situation
> is using the feature.  This appears to be precisely one of those times.
> 
> No one cares, so let's code this clean.
> 
> Eric
> 




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux Kernel]     [Linux Kernel Hardening]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux SCSI]

  Powered by Linux