On Fri, 2018-02-09 at 08:23 -0800, James Bottomley wrote: > On Fri, 2018-02-09 at 07:26 -0500, Mimi Zohar wrote: > > On Fri, 2018-02-09 at 12:02 +0200, Jarkko Sakkinen wrote: > > > > > > On Thu, Feb 08, 2018 at 09:02:00AM -0800, James Bottomley wrote: > > > > > > > > There is an identified regression: the TPM driver will now > > > > periodically > > > > fail to attach. However, there's no point reviewing until we > > > > agree > > > > what the fix is. I was just waiting to verify this fixed my > > > > problem > > > > (which means seeing the messages it spits out proving the TPM has > > > > remained in self test). I have now seen this and the driver > > > > still > > > > works, so I can submit a formal patch. > > > > > > For the self-test the duration falls down to 2 seconds as the specs > > > do > > > not contain any well-defined duration for it, or at least I haven't > > > found it. > > > > > > I see three alternative ways the fix the self-test: > > > > > > 1. Execute self-test with fullTest = YES. > > > 2. Have a flag TPM_CHIP_TESTING that is set when the self-test is > > > started. Issue a warning on time-out. Check for this flag in > > > tpm_transmit_cmd() and tpm_write() and resend self-test command > > > if the flag is stil test before the actual command. Return > > > -EBUSY > > > and print a warning if self-test is still active. > > > 3. Increase the duration to the "correct" value if we have one. > > > > Please take into account that the TPM must complete initialization > > BEFORE IMA looks for the TPM, otherwise IMA goes into TPM-bypass > > mode. This consistently happens with a full self-test (option 1). > > Increasing the wait duration will most likely cause this to happen as > > well (option 2). > > > > Based on James' patch description, which says "There are various > > theories that resending the self-test command actually causes the > > tests to restart and thus triggers more TPM_RC_TESTING returns until > > the timeout is exceeded", I think IMA's detecting the TPM, by doing a > > PCR read, will cause the self-test to restart (option 2). > > Actually, no, only doing another selftest seems to restart. Any other > command will either get a normal return (if the TPM has already tested > the subsystem) or an RC_TESTING return indicate it's still being > tested. Jarkko's option 2 suggested resending the self-test, thus my comment. > It seems that the PCRs are one of the earliest things to come > on-line, so IMA always works. This is on my current laptop where I'm > running this patch with IMA: I no longer see the IMA bypass message and > IMA comes up normally. Right, as long as the TPM isn't doing a full self-test. Mimi
