Re: [PATCH v4 19/19] fs: handle inode->i_version more efficiently

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri 22-12-17 07:05:56, Jeff Layton wrote:
> From: Jeff Layton <jlayton@xxxxxxxxxx>
> 
> Since i_version is mostly treated as an opaque value, we can exploit that
> fact to avoid incrementing it when no one is watching. With that change,
> we can avoid incrementing the counter on writes, unless someone has
> queried for it since it was last incremented. If the a/c/mtime don't
> change, and the i_version hasn't changed, then there's no need to dirty
> the inode metadata on a write.
> 
> Convert the i_version counter to an atomic64_t, and use the lowest order
> bit to hold a flag that will tell whether anyone has queried the value
> since it was last incremented.
> 
> When we go to maybe increment it, we fetch the value and check the flag
> bit.  If it's clear then we don't need to do anything if the update
> isn't being forced.
> 
> If we do need to update, then we increment the counter by 2, and clear
> the flag bit, and then use a CAS op to swap it into place. If that
> works, we return true. If it doesn't then do it again with the value
> that we fetch from the CAS operation.
> 
> On the query side, if the flag is already set, then we just shift the
> value down by 1 bit and return it. Otherwise, we set the flag in our
> on-stack value and again use cmpxchg to swap it into place if it hasn't
> changed. If it has, then we use the value from the cmpxchg as the new
> "old" value and try again.
> 
> This method allows us to avoid incrementing the counter on writes (and
> dirtying the metadata) under typical workloads. We only need to increment
> if it has been queried since it was last changed.
> 
> Signed-off-by: Jeff Layton <jlayton@xxxxxxxxxx>

Looks good to me. You can add:

Reviewed-by: Jan Kara <jack@xxxxxxx>

								Honza

> ---
>  include/linux/fs.h       |   2 +-
>  include/linux/iversion.h | 208 ++++++++++++++++++++++++++++++++++-------------
>  2 files changed, 154 insertions(+), 56 deletions(-)
> 
> diff --git a/include/linux/fs.h b/include/linux/fs.h
> index 76382c24e9d0..6804d075933e 100644
> --- a/include/linux/fs.h
> +++ b/include/linux/fs.h
> @@ -639,7 +639,7 @@ struct inode {
>  		struct hlist_head	i_dentry;
>  		struct rcu_head		i_rcu;
>  	};
> -	u64			i_version;
> +	atomic64_t		i_version;
>  	atomic_t		i_count;
>  	atomic_t		i_dio_count;
>  	atomic_t		i_writecount;
> diff --git a/include/linux/iversion.h b/include/linux/iversion.h
> index e08c634779df..cef242e54489 100644
> --- a/include/linux/iversion.h
> +++ b/include/linux/iversion.h
> @@ -5,6 +5,8 @@
>  #include <linux/fs.h>
>  
>  /*
> + * The inode->i_version field:
> + * ---------------------------
>   * The change attribute (i_version) is mandated by NFSv4 and is mostly for
>   * knfsd, but is also used for other purposes (e.g. IMA). The i_version must
>   * appear different to observers if there was a change to the inode's data or
> @@ -27,86 +29,171 @@
>   * i_version on namespace changes in directories (mkdir, rmdir, unlink, etc.).
>   * We consider these sorts of filesystems to have a kernel-managed i_version.
>   *
> + * This implementation uses the low bit in the i_version field as a flag to
> + * track when the value has been queried. If it has not been queried since it
> + * was last incremented, we can skip the increment in most cases.
> + *
> + * In the event that we're updating the ctime, we will usually go ahead and
> + * bump the i_version anyway. Since that has to go to stable storage in some
> + * fashion, we might as well increment it as well.
> + *
> + * With this implementation, the value should always appear to observers to
> + * increase over time if the file has changed. It's recommended to use
> + * inode_cmp_iversion() helper to compare values.
> + *
>   * Note that some filesystems (e.g. NFS and AFS) just use the field to store
> - * a server-provided value (for the most part). For that reason, those
> + * a server-provided value for the most part. For that reason, those
>   * filesystems do not set SB_I_VERSION. These filesystems are considered to
>   * have a self-managed i_version.
> + *
> + * Persistently storing the i_version
> + * ----------------------------------
> + * Queries of the i_version field are not gated on them hitting the backing
> + * store. It's always possible that the host could crash after allowing
> + * a query of the value but before it has made it to disk.
> + *
> + * To mitigate this problem, filesystems should always use
> + * inode_set_iversion_queried when loading an existing inode from disk. This
> + * ensures that the next attempted inode increment will result in the value
> + * changing.
> + *
> + * Storing the value to disk therefore does not count as a query, so those
> + * filesystems should use inode_peek_iversion to grab the value to be stored.
> + * There is no need to flag the value as having been queried in that case.
>   */
>  
> +/*
> + * We borrow the lowest bit in the i_version to use as a flag to tell whether
> + * it has been queried since we last incremented it. If it has, then we must
> + * increment it on the next change. After that, we can clear the flag and
> + * avoid incrementing it again until it has again been queried.
> + */
> +#define I_VERSION_QUERIED_SHIFT	(1)
> +#define I_VERSION_QUERIED	(1ULL << (I_VERSION_QUERIED_SHIFT - 1))
> +#define I_VERSION_INCREMENT	(1ULL << I_VERSION_QUERIED_SHIFT)
> +
>  /**
>   * inode_set_iversion_raw - set i_version to the specified raw value
>   * @inode: inode to set
> - * @new: new i_version value to set
> + * @val: new i_version value to set
>   *
> - * Set @inode's i_version field to @new. This function is for use by
> + * Set @inode's i_version field to @val. This function is for use by
>   * filesystems that self-manage the i_version.
>   *
>   * For example, the NFS client stores its NFSv4 change attribute in this way,
>   * and the AFS client stores the data_version from the server here.
>   */
>  static inline void
> -inode_set_iversion_raw(struct inode *inode, const u64 new)
> +inode_set_iversion_raw(struct inode *inode, const u64 val)
> +{
> +	atomic64_set(&inode->i_version, val);
> +}
> +
> +/**
> + * inode_peek_iversion_raw - grab a "raw" iversion value
> + * @inode: inode from which i_version should be read
> + *
> + * Grab a "raw" inode->i_version value and return it. The i_version is not
> + * flagged or converted in any way. This is mostly used to access a self-managed
> + * i_version.
> + *
> + * With those filesystems, we want to treat the i_version as an entirely
> + * opaque value.
> + */
> +static inline u64
> +inode_peek_iversion_raw(const struct inode *inode)
>  {
> -	inode->i_version = new;
> +	return atomic64_read(&inode->i_version);
>  }
>  
>  /**
>   * inode_set_iversion - set i_version to a particular value
>   * @inode: inode to set
> - * @new: new i_version value to set
> + * @val: new i_version value to set
>   *
> - * Set @inode's i_version field to @new. This function is for filesystems with
> - * a kernel-managed i_version.
> + * Set @inode's i_version field to @val. This function is for filesystems with
> + * a kernel-managed i_version, for initializing a newly-created inode from
> + * scratch.
>   *
> - * For now, this just does the same thing as the _raw variant.
> + * In this case, we do not set the QUERIED flag since we know that this value
> + * has never been queried.
>   */
>  static inline void
> -inode_set_iversion(struct inode *inode, const u64 new)
> +inode_set_iversion(struct inode *inode, const u64 val)
>  {
> -	inode_set_iversion_raw(inode, new);
> +	inode_set_iversion_raw(inode, val << I_VERSION_QUERIED_SHIFT);
>  }
>  
>  /**
> - * inode_set_iversion_queried - set i_version to a particular value and set
> - *                              flag to indicate that it has been viewed
> + * inode_set_iversion_queried - set i_version to a particular value as quereied
>   * @inode: inode to set
> - * @new: new i_version value to set
> + * @val: new i_version value to set
>   *
> - * When loading in an i_version value from a backing store, we typically don't
> - * know whether it was previously viewed before being stored or not. Thus, we
> - * must assume that it was, to ensure that any changes will result in the
> - * value changing.
> + * Set @inode's i_version field to @val, and flag it for increment on the next
> + * change.
>   *
> - * This function will set the inode's i_version, and possibly flag the value
> - * as if it has already been viewed at least once.
> + * Filesystems that persistently store the i_version on disk should use this
> + * when loading an existing inode from disk.
>   *
> - * For now, this just does what inode_set_iversion does.
> + * When loading in an i_version value from a backing store, we can't be certain
> + * that it wasn't previously viewed before being stored. Thus, we must assume
> + * that it was, to ensure that we don't end up handing out the same value for
> + * different versions of the same inode.
>   */
>  static inline void
> -inode_set_iversion_queried(struct inode *inode, const u64 new)
> +inode_set_iversion_queried(struct inode *inode, const u64 val)
>  {
> -	inode_set_iversion(inode, new);
> +	inode_set_iversion_raw(inode, (val << I_VERSION_QUERIED_SHIFT) |
> +				I_VERSION_QUERIED);
>  }
>  
>  /**
>   * inode_maybe_inc_iversion - increments i_version
>   * @inode: inode with the i_version that should be updated
> - * @force: increment the counter even if it's not necessary
> + * @force: increment the counter even if it's not necessary?
>   *
>   * Every time the inode is modified, the i_version field must be seen to have
>   * changed by any observer.
>   *
> - * In this implementation, we always increment it after taking the i_lock to
> - * ensure that we don't race with other incrementors.
> + * If "force" is set or the QUERIED flag is set, then ensure that we increment
> + * the value, and clear the queried flag.
>   *
> - * Returns true if counter was bumped, and false if it wasn't.
> + * In the common case where neither is set, then we can return "false" without
> + * updating i_version.
> + *
> + * If this function returns false, and no other metadata has changed, then we
> + * can avoid logging the metadata.
>   */
>  static inline bool
>  inode_maybe_inc_iversion(struct inode *inode, bool force)
>  {
> -	atomic64_t *ivp = (atomic64_t *)&inode->i_version;
> +	u64 cur, old, new;
> +
> +	/*
> +	 * The i_version field is not strictly ordered with any other inode
> +	 * information, but the legacy inode_inc_iversion code used a spinlock
> +	 * to serialize increments.
> +	 *
> +	 * Here, we add full memory barriers to ensure that any de-facto
> +	 * ordering with other info is preserved.
> +	 *
> +	 * This barrier pairs with the barrier in inode_query_iversion()
> +	 */
> +	smp_mb();
> +	cur = inode_peek_iversion_raw(inode);
> +	for (;;) {
> +		/* If flag is clear then we needn't do anything */
> +		if (!force && !(cur & I_VERSION_QUERIED))
> +			return false;
>  
> -	atomic64_inc(ivp);
> +		/* Since lowest bit is flag, add 2 to avoid it */
> +		new = (cur & ~I_VERSION_QUERIED) + I_VERSION_INCREMENT;
> +
> +		old = atomic64_cmpxchg(&inode->i_version, cur, new);
> +		if (likely(old == cur))
> +			break;
> +		cur = old;
> +	}
>  	return true;
>  }
>  
> @@ -129,31 +216,12 @@ inode_inc_iversion(struct inode *inode)
>   * @inode: inode to check
>   *
>   * Returns whether the inode->i_version counter needs incrementing on the next
> - * change.
> - *
> - * For now, we assume that it always does.
> + * change. Just fetch the value and check the QUERIED flag.
>   */
>  static inline bool
>  inode_iversion_need_inc(struct inode *inode)
>  {
> -	return true;
> -}
> -
> -/**
> - * inode_peek_iversion_raw - grab a "raw" iversion value
> - * @inode: inode from which i_version should be read
> - *
> - * Grab a "raw" inode->i_version value and return it. The i_version is not
> - * flagged or converted in any way. This is mostly used to access a self-managed
> - * i_version.
> - *
> - * With those filesystems, we want to treat the i_version as an entirely
> - * opaque value.
> - */
> -static inline u64
> -inode_peek_iversion_raw(const struct inode *inode)
> -{
> -	return inode->i_version;
> +	return inode_peek_iversion_raw(inode) & I_VERSION_QUERIED;
>  }
>  
>  /**
> @@ -170,7 +238,7 @@ inode_peek_iversion_raw(const struct inode *inode)
>  static inline u64
>  inode_peek_iversion(const struct inode *inode)
>  {
> -	return inode_peek_iversion_raw(inode);
> +	return inode_peek_iversion_raw(inode) >> I_VERSION_QUERIED_SHIFT;
>  }
>  
>  /**
> @@ -182,12 +250,35 @@ inode_peek_iversion(const struct inode *inode)
>   * that a later query of the i_version will result in a different value if
>   * anything has changed.
>   *
> - * This implementation just does a peek.
> + * In this implementation, we fetch the current value, set the QUERIED flag and
> + * then try to swap it into place with a cmpxchg, if it wasn't already set. If
> + * that fails, we try again with the newly fetched value from the cmpxchg.
>   */
>  static inline u64
>  inode_query_iversion(struct inode *inode)
>  {
> -	return inode_peek_iversion(inode);
> +	u64 cur, old, new;
> +
> +	cur = inode_peek_iversion_raw(inode);
> +	for (;;) {
> +		/* If flag is already set, then no need to swap */
> +		if (cur & I_VERSION_QUERIED) {
> +			/*
> +			 * This barrier (and the implicit barrier in the
> +			 * cmpxchg below) pairs with the barrier in
> +			 * inode_maybe_inc_iversion().
> +			 */
> +			smp_mb();
> +			break;
> +		}
> +
> +		new = cur | I_VERSION_QUERIED;
> +		old = atomic64_cmpxchg(&inode->i_version, cur, new);
> +		if (likely(old == cur))
> +			break;
> +		cur = old;
> +	}
> +	return cur >> I_VERSION_QUERIED_SHIFT;
>  }
>  
>  /**
> @@ -196,11 +287,18 @@ inode_query_iversion(struct inode *inode)
>   * @old: old value to check against its i_version
>   *
>   * Compare an i_version counter with a previous one. Returns 0 if they are
> - * the same or non-zero if they are different.
> + * the same, a positive value if the one in the inode appears newer than @old,
> + * and a negative value if @old appears to be newer than the one in the
> + * inode.
> + *
> + * Note that we don't need to set the QUERIED flag in this case, as the value
> + * in the inode is not being recorded for later use.
>   */
> +
>  static inline s64
>  inode_cmp_iversion(const struct inode *inode, const u64 old)
>  {
> -	return (s64)inode_peek_iversion(inode) - (s64)old;
> +	return (s64)(inode_peek_iversion_raw(inode) & ~I_VERSION_QUERIED) -
> +	       (s64)(old << I_VERSION_QUERIED_SHIFT);
>  }
>  #endif
> -- 
> 2.14.3
> 
-- 
Jan Kara <jack@xxxxxxxx>
SUSE Labs, CR



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux Kernel]     [Linux Kernel Hardening]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux SCSI]

  Powered by Linux