This re-uses the same HID report descriptor that we also use for the tablet mode after switching the device. The keys send uniquely identifyable shortcuts so we can map those to buttons. However the dial and the button inside the dial send events on a different hidraw node and they are unreliable (e.g. the button does not get released reliably). So they're ignored in this patch, it's not worth the effort getting those to work correctly. Signed-off-by: Peter Hutterer <peter.hutterer@xxxxxxxxx> Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/158 Signed-off-by: Benjamin Tissoires <bentiss@xxxxxxxxxx> --- drivers/hid/bpf/progs/Huion__KeydialK20.bpf.c | 531 ++++++++++++++++++++++++++ 1 file changed, 531 insertions(+) diff --git a/drivers/hid/bpf/progs/Huion__KeydialK20.bpf.c b/drivers/hid/bpf/progs/Huion__KeydialK20.bpf.c new file mode 100644 index 0000000000000000000000000000000000000000..ec360d71130f7edee7faf5d64f0e81ddf65291c9 --- /dev/null +++ b/drivers/hid/bpf/progs/Huion__KeydialK20.bpf.c @@ -0,0 +1,531 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* Copyright (c) 2024 Red Hat, Inc + */ + +#include "vmlinux.h" +#include "hid_bpf.h" +#include "hid_bpf_helpers.h" +#include "hid_report_helpers.h" +#include <bpf/bpf_tracing.h> + +#define VID_HUION 0x256C +#define PID_KEYDIAL_K20 0x0069 + +HID_BPF_CONFIG( + HID_DEVICE(BUS_USB, HID_GROUP_GENERIC, VID_HUION, PID_KEYDIAL_K20), +); + +/* Filled in by udev-hid-bpf */ +char UDEV_PROP_HUION_FIRMWARE_ID[64]; + +/* The prefix of the firmware ID we expect for this device. The full firmware + * string has a date suffix, e.g. HUION_T21h_230511 + */ +char EXPECTED_FIRMWARE_ID[] = "HUION_T21h_"; + +/* How this BPF program works: the tablet has two modes, firmware mode and + * tablet mode. In firmware mode (out of the box) the tablet sends button events + * as keyboard shortcuts and the dial as wheel but it's not forwarded by the kernel. + * In tablet mode it uses a vendor specific hid report to report everything instead. + * Depending on the mode some hid reports are never sent and the corresponding + * devices are mute. + * + * To switch the tablet use e.g. https://github.com/whot/huion-switcher + * or one of the tools from the digimend project + * + * This BPF currently works for both modes only. The huion-switcher tool sets the + * HUION_FIRMWARE_ID udev property - if that is set then we disable the firmware + * pad and pen reports (by making them vendor collections that are ignored). + * If that property is not set we fix all hidraw nodes so the tablet works in + * either mode though the drawback is that the device will show up twice if + * you bind it to all event nodes + * + * Default report descriptor for the first exposed hidraw node: + * + * # HUION Huion Keydial_K20 + * # Report descriptor length: 18 bytes + * # 0x06, 0x00, 0xff, // Usage Page (Vendor Defined Page 0xFF00) 0 + * # 0x09, 0x01, // Usage (Vendor Usage 0x01) 3 + * # 0xa1, 0x01, // Collection (Application) 5 + * # 0x85, 0x08, // Report ID (8) 7 + * # 0x75, 0x58, // Report Size (88) 9 + * # 0x95, 0x01, // Report Count (1) 11 + * # 0x09, 0x01, // Usage (Vendor Usage 0x01) 13 + * # 0x81, 0x02, // Input (Data,Var,Abs) 15 + * # 0xc0, // End Collection 17 + * R: 18 06 00 ff 09 01 a1 01 85 08 75 58 95 01 09 01 81 02 c0 + * + * This report descriptor appears to be identical for all Huion devices. + * + * Second hidraw node is the Pad. This one sends the button events until the tablet is + * switched to raw mode, then it's mute. + * + * # HUION Huion Keydial_K20 + * # Report descriptor length: 135 bytes + * # 0x05, 0x01, // Usage Page (Generic Desktop) 0 + * # 0x09, 0x06, // Usage (Keyboard) 2 + * # 0xa1, 0x01, // Collection (Application) 4 + * # 0x85, 0x03, // Report ID (3) 6 + * # 0x05, 0x07, // Usage Page (Keyboard/Keypad) 8 + * # 0x19, 0xe0, // UsageMinimum (224) 10 + * # 0x29, 0xe7, // UsageMaximum (231) 12 + * # 0x15, 0x00, // Logical Minimum (0) 14 + * # 0x25, 0x01, // Logical Maximum (1) 16 + * # 0x75, 0x01, // Report Size (1) 18 + * # 0x95, 0x08, // Report Count (8) 20 + * # 0x81, 0x02, // Input (Data,Var,Abs) 22 + * # 0x05, 0x07, // Usage Page (Keyboard/Keypad) 24 + * # 0x19, 0x00, // UsageMinimum (0) 26 + * # 0x29, 0xff, // UsageMaximum (255) 28 + * # 0x26, 0xff, 0x00, // Logical Maximum (255) 30 + * # 0x75, 0x08, // Report Size (8) 33 + * # 0x95, 0x06, // Report Count (6) 35 + * # 0x81, 0x00, // Input (Data,Arr,Abs) 37 + * # 0xc0, // End Collection 39 + * # 0x05, 0x0c, // Usage Page (Consumer) 40 + * # 0x09, 0x01, // Usage (Consumer Control) 42 + * # 0xa1, 0x01, // Collection (Application) 44 + * # 0x85, 0x04, // Report ID (4) 46 + * # 0x05, 0x0c, // Usage Page (Consumer) 48 + * # 0x19, 0x00, // UsageMinimum (0) 50 + * # 0x2a, 0x80, 0x03, // UsageMaximum (896) 52 + * # 0x15, 0x00, // Logical Minimum (0) 55 + * # 0x26, 0x80, 0x03, // Logical Maximum (896) 57 + * # 0x75, 0x10, // Report Size (16) 60 + * # 0x95, 0x01, // Report Count (1) 62 + * # 0x81, 0x00, // Input (Data,Arr,Abs) 64 + * # 0xc0, // End Collection 66 + * # 0x05, 0x01, // Usage Page (Generic Desktop) 67 + * # 0x09, 0x02, // Usage (Mouse) 69 + * # 0xa1, 0x01, // Collection (Application) 71 + * # 0x09, 0x01, // Usage (Pointer) 73 + * # 0x85, 0x05, // Report ID (5) 75 + * # 0xa1, 0x00, // Collection (Physical) 77 + * # 0x05, 0x09, // Usage Page (Button) 79 + * # 0x19, 0x01, // UsageMinimum (1) 81 + * # 0x29, 0x05, // UsageMaximum (5) 83 + * # 0x15, 0x00, // Logical Minimum (0) 85 + * # 0x25, 0x01, // Logical Maximum (1) 87 + * # 0x95, 0x05, // Report Count (5) 89 + * # 0x75, 0x01, // Report Size (1) 91 + * # 0x81, 0x02, // Input (Data,Var,Abs) 93 + * # 0x95, 0x01, // Report Count (1) 95 + * # 0x75, 0x03, // Report Size (3) 97 + * # 0x81, 0x01, // Input (Cnst,Arr,Abs) 99 + * # 0x05, 0x01, // Usage Page (Generic Desktop) 101 + * # 0x09, 0x30, // Usage (X) 103 + * # 0x09, 0x31, // Usage (Y) 105 + * # 0x16, 0x00, 0x80, // Logical Minimum (-32768) 107 + * # 0x26, 0xff, 0x7f, // Logical Maximum (32767) 110 + * # 0x75, 0x10, // Report Size (16) 113 + * # 0x95, 0x02, // Report Count (2) 115 + * # 0x81, 0x06, // Input (Data,Var,Rel) 117 + * # 0x95, 0x01, // Report Count (1) 119 + * # 0x75, 0x08, // Report Size (8) 121 + * # 0x05, 0x01, // Usage Page (Generic Desktop) 123 + * # 0x09, 0x38, // Usage (Wheel) 125 + * # 0x15, 0x81, // Logical Minimum (-127) 127 + * # 0x25, 0x7f, // Logical Maximum (127) 129 + * # 0x81, 0x06, // Input (Data,Var,Rel) 131 + * # 0xc0, // End Collection 133 + * # 0xc0, // End Collection 134 + * R: 135 05 01 09 06 a1 01 85 03 05 07 19 e0 29 e7 15 00 25 01 75 01 95 08 81 02 05 07 19 00 29 ff 26 ff 00 75 08 95 06 81 00 c0 05 0c 09 01 a1 01 85 04 05 0c 19 00 2a 80 03 15 00 26 80 03 75 10 95 01 81 00 c0 05 01 09 02 a1 01 09 01 85 05 a1 00 05 09 19 01 29 05 15 00 25 01 95 05 75 01 81 02 95 01 75 03 81 01 05 01 09 30 09 31 16 00 80 26 ff 7f 7510 95 02 81 06 95 01 75 08 05 01 09 38 15 81 25 7f 81 06 c0 c0 + * + * Third hidraw node is a multi-axis controller which sends the dial events + * and the button inside the dial. If the tablet is switched to raw mode it is mute. + * + * # HUION Huion Keydial_K20 + * # Report descriptor length: 108 bytes + * # 0x05, 0x01, // Usage Page (Generic Desktop) 0 + * # 0x09, 0x0e, // Usage (System Multi-Axis Controller) 2 + * # 0xa1, 0x01, // Collection (Application) 4 + * # 0x85, 0x11, // Report ID (17) 6 + * # 0x05, 0x0d, // Usage Page (Digitizers) 8 + * # 0x09, 0x21, // Usage (Puck) 10 + * # 0xa1, 0x02, // Collection (Logical) 12 + * # 0x15, 0x00, // Logical Minimum (0) 14 + * # 0x25, 0x01, // Logical Maximum (1) 16 + * # 0x75, 0x01, // Report Size (1) 18 + * # 0x95, 0x01, // Report Count (1) 20 + * # 0xa1, 0x00, // Collection (Physical) 22 + * # 0x05, 0x09, // Usage Page (Button) 24 + * # 0x09, 0x01, // Usage (Button 1) 26 + * # 0x81, 0x02, // Input (Data,Var,Abs) 28 + * # 0x05, 0x0d, // Usage Page (Digitizers) 30 + * # 0x09, 0x33, // Usage (Touch) 32 + * # 0x81, 0x02, // Input (Data,Var,Abs) 34 + * # 0x95, 0x06, // Report Count (6) 36 + * # 0x81, 0x03, // Input (Cnst,Var,Abs) 38 + * # 0xa1, 0x02, // Collection (Logical) 40 + * # 0x05, 0x01, // Usage Page (Generic Desktop) 42 + * # 0x09, 0x37, // Usage (Dial) 44 + * # 0x16, 0x00, 0x80, // Logical Minimum (-32768) 46 + * # 0x26, 0xff, 0x7f, // Logical Maximum (32767) 49 + * # 0x75, 0x10, // Report Size (16) 52 + * # 0x95, 0x01, // Report Count (1) 54 + * # 0x81, 0x06, // Input (Data,Var,Rel) 56 + * # 0x35, 0x00, // Physical Minimum (0) 58 + * # 0x46, 0x10, 0x0e, // Physical Maximum (3600) 60 + * # 0x15, 0x00, // Logical Minimum (0) 63 + * # 0x26, 0x10, 0x0e, // Logical Maximum (3600) 65 + * # 0x09, 0x48, // Usage (Resolution Multiplier) 68 + * # 0xb1, 0x02, // Feature (Data,Var,Abs) 70 + * # 0x45, 0x00, // Physical Maximum (0) 72 + * # 0xc0, // End Collection 74 + * # 0x75, 0x08, // Report Size (8) 75 + * # 0x95, 0x01, // Report Count (1) 77 + * # 0x81, 0x01, // Input (Cnst,Arr,Abs) 79 + * # 0x75, 0x08, // Report Size (8) 81 + * # 0x95, 0x01, // Report Count (1) 83 + * # 0x81, 0x01, // Input (Cnst,Arr,Abs) 85 + * # 0x75, 0x08, // Report Size (8) 87 + * # 0x95, 0x01, // Report Count (1) 89 + * # 0x81, 0x01, // Input (Cnst,Arr,Abs) 91 + * # 0x75, 0x08, // Report Size (8) 93 + * # 0x95, 0x01, // Report Count (1) 95 + * # 0x81, 0x01, // Input (Cnst,Arr,Abs) 97 + * # 0x75, 0x08, // Report Size (8) 99 + * # 0x95, 0x01, // Report Count (1) 101 + * # 0x81, 0x01, // Input (Cnst,Arr,Abs) 103 + * # 0xc0, // End Collection 105 + * # 0xc0, // End Collection 106 + * # 0xc0, // End Collection 107 + * R: 108 05 01 09 0e a1 01 85 11 05 0d 09 21 a1 02 15 00 25 01 75 01 95 01 a1 00 05 09 09 01 81 02 05 0d 09 33 81 02 95 06 81 03 a1 02 05 01 09 37 16 00 80 26 ff 7f 75 10 95 01 81 06 35 00 46 10 0e 15 00 26 10 0e 09 48 b1 02 45 00 c0 75 08 95 01 81 01 75 08 95 01 81 01 75 08 95 01 81 01 75 08 95 01 81 01 75 08 95 01 81 01 c0 c0 c0 + * + */ + +#define PAD_REPORT_DESCRIPTOR_LENGTH 135 +#define PUCK_REPORT_DESCRIPTOR_LENGTH 108 +#define VENDOR_REPORT_DESCRIPTOR_LENGTH 18 +#define PAD_KBD_REPORT_ID 3 +#define PAD_CC_REPORT_ID 3 // never sends events +#define PAD_MOUSE_REPORT_ID 4 // never sends events +#define PUCK_REPORT_ID 17 +#define VENDOR_REPORT_ID 8 +#define PAD_KBD_REPORT_LENGTH 8 +#define PAD_CC_REPORT_LENGTH 3 +#define PAD_MOUSE_REPORT_LENGTH 7 +#define PUCK_REPORT_LENGTH 9 +#define VENDOR_REPORT_LENGTH 12 + +__u32 last_button_state; + +static const __u8 disabled_rdesc_puck[] = { + FixedSizeVendorReport(PUCK_REPORT_LENGTH) +}; + +static const __u8 disabled_rdesc_pad[] = { + FixedSizeVendorReport(PAD_KBD_REPORT_LENGTH) + FixedSizeVendorReport(PAD_CC_REPORT_LENGTH) + FixedSizeVendorReport(PAD_MOUSE_REPORT_LENGTH) +}; + +static const __u8 fixed_rdesc_vendor[] = { + UsagePage_GenericDesktop + Usage_GD_Keypad + CollectionApplication( + // Byte 0 + // We send our pad events on the vendor report id because why not + ReportId(VENDOR_REPORT_ID) + UsagePage_Digitizers + Usage_Dig_TabletFunctionKeys + CollectionPhysical( + // Byte 1 is a button so we look like a tablet + Usage_Dig_BarrelSwitch // BTN_STYLUS, needed so we get to be a tablet pad + ReportCount(1) + ReportSize(1) + Input(Var|Abs) + ReportCount(7) // Padding + Input(Const) + // Bytes 2/3 - x/y just exist so we get to be a tablet pad + UsagePage_GenericDesktop + Usage_GD_X + Usage_GD_Y + LogicalMinimum_i8(0x0) + LogicalMaximum_i8(0x1) + ReportCount(2) + ReportSize(8) + Input(Var|Abs) + // Bytes 4-7 are the button state for 19 buttons + pad out to u32 + // We send the first 10 buttons as buttons 1-10 which is BTN_0 -> BTN_9 + UsagePage_Button + UsageMinimum_i8(1) + UsageMaximum_i8(10) + LogicalMinimum_i8(0x0) + LogicalMaximum_i8(0x1) + ReportCount(10) + ReportSize(1) + Input(Var|Abs) + // We send the other 9 buttons as buttons 0x31 and above -> BTN_A - BTN_TL2 + UsageMinimum_i8(0x31) + UsageMaximum_i8(0x3a) + ReportCount(9) + ReportSize(1) + Input(Var|Abs) + ReportCount(13) + ReportSize(1) + Input(Const) // padding + // Byte 6 is the wheel + UsagePage_GenericDesktop + Usage_GD_Wheel + LogicalMinimum_i8(-1) + LogicalMaximum_i8(1) + ReportCount(1) + ReportSize(8) + Input(Var|Rel) + ) + // Make sure we match our original report length + FixedSizeVendorReport(VENDOR_REPORT_LENGTH) + ) +}; + +/* Identical to fixed_rdesc_pad but with different FixedSizeVendorReport */ +static const __u8 fixed_rdesc_pad[] = { + UsagePage_GenericDesktop + Usage_GD_Keypad + CollectionApplication( + // Byte 0 + // We send our pad events on the vendor report id because why not + ReportId(VENDOR_REPORT_ID) + UsagePage_Digitizers + Usage_Dig_TabletFunctionKeys + CollectionPhysical( + // Byte 1 is a button so we look like a tablet + Usage_Dig_BarrelSwitch // BTN_STYLUS, needed so we get to be a tablet pad + ReportCount(1) + ReportSize(1) + Input(Var|Abs) + ReportCount(7) // Padding + Input(Const) + // Bytes 2/3 - x/y just exist so we get to be a tablet pad + UsagePage_GenericDesktop + Usage_GD_X + Usage_GD_Y + LogicalMinimum_i8(0x0) + LogicalMaximum_i8(0x1) + ReportCount(2) + ReportSize(8) + Input(Var|Abs) + // Bytes 4-7 are the button state for 19 buttons + pad out to u32 + // We send the first 10 buttons as buttons 1-10 which is BTN_0 -> BTN_9 + UsagePage_Button + UsageMinimum_i8(1) + UsageMaximum_i8(10) + LogicalMinimum_i8(0x0) + LogicalMaximum_i8(0x1) + ReportCount(10) + ReportSize(1) + Input(Var|Abs) + // We send the other 9 buttons as buttons 0x31 and above -> BTN_A - BTN_TL2 + UsageMinimum_i8(0x31) + UsageMaximum_i8(0x3a) + ReportCount(9) + ReportSize(1) + Input(Var|Abs) + ReportCount(13) + ReportSize(1) + Input(Const) // padding + // Byte 6 is the wheel + UsagePage_GenericDesktop + Usage_GD_Wheel + LogicalMinimum_i8(-1) + LogicalMaximum_i8(1) + ReportCount(1) + ReportSize(8) + Input(Var|Rel) + ) + // Make sure we match our original report lengths + FixedSizeVendorReport(PAD_KBD_REPORT_LENGTH) + FixedSizeVendorReport(PAD_CC_REPORT_LENGTH) + FixedSizeVendorReport(PAD_MOUSE_REPORT_LENGTH) + ) +}; + +SEC(HID_BPF_RDESC_FIXUP) +int BPF_PROG(k20_fix_rdesc, struct hid_bpf_ctx *hctx) +{ + __u8 *data = hid_bpf_get_data(hctx, 0 /* offset */, HID_MAX_DESCRIPTOR_SIZE /* size */); + __s32 rdesc_size = hctx->size; + __u8 have_fw_id; + + if (!data) + return 0; /* EPERM check */ + + /* If we have a firmware ID and it matches our expected prefix, we + * disable the default pad/puck nodes. They won't send events + * but cause duplicate devices. + */ + have_fw_id = __builtin_memcmp(UDEV_PROP_HUION_FIRMWARE_ID, + EXPECTED_FIRMWARE_ID, + sizeof(EXPECTED_FIRMWARE_ID) - 1) == 0; + if (rdesc_size == PAD_REPORT_DESCRIPTOR_LENGTH) { + if (have_fw_id) { + __builtin_memcpy(data, disabled_rdesc_pad, sizeof(disabled_rdesc_pad)); + return sizeof(disabled_rdesc_pad); + } else { + __builtin_memcpy(data, fixed_rdesc_pad, sizeof(fixed_rdesc_pad)); + return sizeof(fixed_rdesc_pad); + + } + } + if (rdesc_size == PUCK_REPORT_DESCRIPTOR_LENGTH) { + if (have_fw_id) { + __builtin_memcpy(data, disabled_rdesc_puck, sizeof(disabled_rdesc_puck)); + return sizeof(disabled_rdesc_puck); + } + } + /* Always fix the vendor mode so the tablet will work even if nothing sets + * the udev property (e.g. huion-switcher run manually) + */ + if (rdesc_size == VENDOR_REPORT_DESCRIPTOR_LENGTH) { + __builtin_memcpy(data, fixed_rdesc_vendor, sizeof(fixed_rdesc_vendor)); + return sizeof(fixed_rdesc_vendor); + + } + return 0; +} + +SEC(HID_BPF_DEVICE_EVENT) +int BPF_PROG(k20_fix_events, struct hid_bpf_ctx *hctx) +{ + __u8 *data = hid_bpf_get_data(hctx, 0 /* offset */, 10 /* size */); + + if (!data) + return 0; /* EPERM check */ + + /* Only sent if tablet is in raw mode */ + if (data[0] == VENDOR_REPORT_ID) { + /* See fixed_rdesc_pad */ + struct pad_report { + __u8 report_id; + __u8 btn_stylus:1; + __u8 pad:7; + __u8 x; + __u8 y; + __u32 buttons; + __u8 wheel; + } __attribute__((packed)) *pad_report; + + __u8 wheel = 0; + + /* Wheel report */ + if (data[1] == 0xf1) { + if (data[5] == 2) + wheel = 0xff; + else + wheel = data[5]; + } else { + /* data[4..6] are the buttons, mapped correctly */ + last_button_state = data[4] | (data[5] << 8) | (data[6] << 16); + wheel = 0; // wheel + } + + pad_report = (struct pad_report *)data; + pad_report->report_id = VENDOR_REPORT_ID; + pad_report->btn_stylus = 0; + pad_report->x = 0; + pad_report->y = 0; + pad_report->buttons = last_button_state; + pad_report->wheel = wheel; + + return sizeof(struct pad_report); + } + + if (data[0] == PAD_KBD_REPORT_ID) { + const __u8 button_mapping[] = { + 0x0e, /* Button 1: K */ + 0x0a, /* Button 2: G */ + 0x0f, /* Button 3: L */ + 0x4c, /* Button 4: Delete */ + 0x0c, /* Button 5: I */ + 0x07, /* Button 6: D */ + 0x05, /* Button 7: B */ + 0x08, /* Button 8: E */ + 0x16, /* Button 9: S */ + 0x1d, /* Button 10: Z */ + 0x06, /* Button 11: C */ + 0x19, /* Button 12: V */ + 0xff, /* Button 13: LeftControl */ + 0xff, /* Button 14: LeftAlt */ + 0xff, /* Button 15: LeftShift */ + 0x28, /* Button 16: Return Enter */ + 0x2c, /* Button 17: Spacebar */ + 0x11, /* Button 18: N */ + }; + /* See fixed_rdesc_pad */ + struct pad_report { + __u8 report_id; + __u8 btn_stylus:1; + __u8 pad:7; + __u8 x; + __u8 y; + __u32 buttons; + __u8 wheel; + } __attribute__((packed)) *pad_report; + int i, b; + __u8 modifiers = data[1]; + __u32 buttons = 0; + + if (modifiers & 0x01) { /* Control */ + buttons |= BIT(12); + } + if (modifiers & 0x02) { /* Shift */ + buttons |= BIT(14); + } + if (modifiers & 0x04) { /* Alt */ + buttons |= BIT(13); + } + + for (i = 2; i < PAD_KBD_REPORT_LENGTH; i++) { + if (!data[i]) + break; + + for (b = 0; b < ARRAY_SIZE(button_mapping); b++) { + if (data[i] == button_mapping[b]) { + buttons |= BIT(b); + break; + } + } + data[i] = 0; + } + + pad_report = (struct pad_report *)data; + pad_report->report_id = VENDOR_REPORT_ID; + pad_report->btn_stylus = 0; + pad_report->x = 0; + pad_report->y = 0; + pad_report->buttons = buttons; + // The wheel happens on a different hidraw node but its + // values are unreliable (as is the button inside the wheel). + // So the wheel is simply always zero, if you want the wheel + // to work reliably, use the tablet mode. + pad_report->wheel = 0; + + return sizeof(struct pad_report); + } + + return 0; +} + +HID_BPF_OPS(keydial_k20) = { + .hid_device_event = (void *)k20_fix_events, + .hid_rdesc_fixup = (void *)k20_fix_rdesc, +}; + +SEC("syscall") +int probe(struct hid_bpf_probe_args *ctx) +{ + switch (ctx->rdesc_size) { + case PAD_REPORT_DESCRIPTOR_LENGTH: + case PUCK_REPORT_DESCRIPTOR_LENGTH: + case VENDOR_REPORT_DESCRIPTOR_LENGTH: + ctx->retval = 0; + break; + default: + ctx->retval = -EINVAL; + } + + return 0; +} + +char _license[] SEC("license") = "GPL"; -- 2.47.0
