Hello all,
I have an unofficial USB Nintendo Switch Pro controller that I have had
for a few years and want to try to use on Linux. For reference, the
vendor id and device ids are as follows:
Vendor: 20d6
Device: 0002
I tried adding the device to the hid-nintendo module to add support but
that did not work (see below for code). I recieved a few errors from dmesg
nintendo 0003:20D6:0002.0011: Failed to get joycon info; ret=-110
nintendo 0003:20D6:0002.0011: Failed to retrieve controller info; ret=-110
nintendo 0003:20D6:0002.0011: Failed to initialize controller; ret=-110
nintendo 0003:20D6:0002.0011: probe - fail = -110
nintendo 0003:20D6:0002.0011: probe with driver nintendo failed with error -110
I understand that -110 is a timeout. But I don't understand much else.
And I am not sure where to go from here. Any suggestions?
Thanks,
Ethan
---
drivers/hid/hid-ids.h | 1 +
drivers/hid/hid-nintendo.c | 2 ++
2 files changed, 3 insertions(+)
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index c448de53bf91..693e6f584c8a 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -1289,6 +1289,7 @@
#define USB_DEVICE_ID_BLINK1 0x01ed
#define USB_VENDOR_ID_THQ 0x20d6
+#define USB_DEVICE_ID_THQ_BDA_NSW 0x0002
#define USB_DEVICE_ID_THQ_PS3_UDRAW 0xcb17
#define USB_VENDOR_ID_THRUSTMASTER 0x044f
diff --git a/drivers/hid/hid-nintendo.c b/drivers/hid/hid-nintendo.c
index 11ac246176ae..54f1b49849c0 100644
--- a/drivers/hid/hid-nintendo.c
+++ b/drivers/hid/hid-nintendo.c
@@ -2783,6 +2783,8 @@ static const struct hid_device_id nintendo_hid_devices[] = {
USB_DEVICE_ID_NINTENDO_GENCON) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO,
USB_DEVICE_ID_NINTENDO_N64CON) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_THQ,
+ USB_DEVICE_ID_THQ_BDA_NSW) },
{ }
};
MODULE_DEVICE_TABLE(hid, nintendo_hid_devices);
--
2.48.0
