The timestamps in the Firmware log and HID sensor samples are incorrect.
They show 1970-01-01 because the current IPC driver only uses the first
8 bytes of bootup time when synchronizing time with the firmware. The
firmware converts the bootup time to UTC time, which results in the
display of 1970-01-01.
In write_ipc_from_queue(), when sending the MNG_SYNC_FW_CLOCK message,
the clock is updated according to the definition of ipc_time_update_msg.
However, in _ish_sync_fw_clock(), the message length is specified as the
size of uint64_t when building the doorbell. As a result, the firmware
only receives the first 8 bytes of struct ipc_time_update_msg.
This patch corrects the length in the doorbell to ensure the entire
ipc_time_update_msg is sent, fixing the timestamp issue.
Signed-off-by: Zhang Lixu <lixu.zhang@xxxxxxxxx>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
---
drivers/hid/intel-ish-hid/ipc/ipc.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/hid/intel-ish-hid/ipc/ipc.c b/drivers/hid/intel-ish-hid/ipc/ipc.c
index 3cd53fc80634..cb956a8c386c 100644
--- a/drivers/hid/intel-ish-hid/ipc/ipc.c
+++ b/drivers/hid/intel-ish-hid/ipc/ipc.c
@@ -578,14 +578,14 @@ static void fw_reset_work_fn(struct work_struct *work)
static void _ish_sync_fw_clock(struct ishtp_device *dev)
{
static unsigned long prev_sync;
- uint64_t usec;
+ struct ipc_time_update_msg time = {};
if (prev_sync && time_before(jiffies, prev_sync + 20 * HZ))
return;
prev_sync = jiffies;
- usec = ktime_to_us(ktime_get_boottime());
- ipc_send_mng_msg(dev, MNG_SYNC_FW_CLOCK, &usec, sizeof(uint64_t));
+ /* The fields of time would be updated while sending message */
+ ipc_send_mng_msg(dev, MNG_SYNC_FW_CLOCK, &time, sizeof(time));
}
/**
--
2.43.0
