From: Andrei Ilyashenko <andrei.ilyashenko@xxxxxxxxx>
I found that my controller wasn't working with this driver. The LED would light up and it could rumble but was not registering any button presses or joystick movements. I suspected the problem might be that it was not being sent some required init packet so I tried sending the packets being used in xboxone_init_packets and found that sending xboxone_pdp_auth got the controller working. At least for my controller xboxone_pdp_led_on was not strictly necessary but I decided to follow the same pattern used by the other two controllers.
Signed-off-by: Pavel Rojtberg <rojtberg@xxxxxxxxx>
---
drivers/input/joystick/xpad.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index 450a45152d63..b2716b49d3b6 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -694,7 +694,9 @@ static const struct xboxone_init_packet xboxone_init_packets[] = {
XBOXONE_INIT_PKT(0x045e, 0x0b00, xboxone_s_init),
XBOXONE_INIT_PKT(0x045e, 0x0b00, extra_input_packet_init),
XBOXONE_INIT_PKT(0x0e6f, 0x0000, xboxone_pdp_led_on),
+ XBOXONE_INIT_PKT(0x20d6, 0xa01a, xboxone_pdp_led_on),
XBOXONE_INIT_PKT(0x0e6f, 0x0000, xboxone_pdp_auth),
+ XBOXONE_INIT_PKT(0x20d6, 0xa01a, xboxone_pdp_auth),
XBOXONE_INIT_PKT(0x24c6, 0x541a, xboxone_rumblebegin_init),
XBOXONE_INIT_PKT(0x24c6, 0x542a, xboxone_rumblebegin_init),
XBOXONE_INIT_PKT(0x24c6, 0x543a, xboxone_rumblebegin_init),
--
2.43.0
