Add maxim,max77705 sensors binding part. This includes fuelgauge and voltage/current sensor on chip input and system bus. Signed-off-by: Dzmitry Sankouski <dsankouski@xxxxxxxxx> --- Documentation/devicetree/bindings/mfd/maxim,max77705-sensors.yaml | 60 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 60 insertions(+) diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77705-sensors.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77705-sensors.yaml new file mode 100644 index 000000000000..738ce30ca72d --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/maxim,max77705-sensors.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/maxim,max77705-sensors.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX77705 Companion Power Management IC sensors part + +maintainers: + - Dzmitry Sankouski <dsankouski@xxxxxxxxx> + +description: | + The Maxim MAX77705 is a Companion Power Management sensors part includes + fuelgauge and current/voltage monitor for charger input, and system bus. + +properties: + compatible: + const: maxim,max77705-sensors + + reg: + maxItems: 1 + + fuel-gauge: + $ref: /schemas/power/supply/maxim,max17042-common.yaml# + properties: + compatible: + const: maxim,max77705-battery + + required: + - compatible + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensors@36 { + compatible = "maxim,max77705-sensors"; + reg = <0x36>; + + fuel-gauge { + compatible = "maxim,max77705-battery"; + power-supplies = <&max77705_charger>; + maxim,rsns-microohm = <5000>; + maxim,dead-volt = <3400>; + maxim,over-volt = <4350>; + interrupt-parent = <&pm8998_gpios>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + }; + }; + }; -- 2.39.5
