Le 04/12/2024 à 21:09, Dzmitry Sankouski a écrit :
Add driver for Maxim 77705 switch-mode charger (part of max77705
MFD driver) providing power supply class information to userspace.
The driver is configured through DTS (battery and system related
settings).
Signed-off-by: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
---
Hi,
+static int max77705_check_battery(struct max77705_charger_data *charger, int *val)
+{
+ unsigned int reg_data;
+ unsigned int reg_data2;
+ struct regmap *regmap = charger->regmap;
+
+
+ regmap_read(regmap, MAX77705_CHG_REG_INT_OK, ®_data);
+
+ dev_dbg(charger->dev, "CHG_INT_OK(0x%x)\n", reg_data);
+
+ regmap_read(regmap,
+ MAX77705_CHG_REG_DETAILS_00, ®_data2);
This can fit on a single line, I think.
+
+ dev_dbg(charger->dev, "CHG_DETAILS00(0x%x)\n", reg_data2);
+
+ if ((reg_data & MAX77705_BATP_OK) || !(reg_data2 & MAX77705_BATP_DTLS))
+ *val = true;
+ else
+ *val = false;
+
+ return 0;
+}
...
+static int max77705_get_input_current(struct max77705_charger_data *charger,
+ int *val)
+{
+ unsigned int reg_data;
+ int get_current = 0;
+ struct regmap *regmap = charger->regmap;
+
+ regmap_read(regmap,
+ MAX77705_CHG_REG_CNFG_09, ®_data);
It can fit on a single line, I think.
+
+ reg_data &= MAX77705_CHG_CHGIN_LIM_MASK;
+
+ if (reg_data <= 3)
+ get_current = 100;
+ else if (reg_data >= MAX77705_CHG_CHGIN_LIM_MASK)
+ get_current = MAX77705_CURRENT_CHGIN_MAX;
+ else
+ get_current = (reg_data + 1) * 25;
+
+ *val = get_current;
+
+ return 0;
+}
+
+static int max77705_get_charge_current(struct max77705_charger_data *charger,
+ int *val)
+{
+ unsigned int reg_data;
+ struct regmap *regmap = charger->regmap;
+
+
No need for to empty lines.
+ regmap_read(regmap, MAX77705_CHG_REG_CNFG_02, ®_data);
+ reg_data &= MAX77705_CHG_CC;
+
+ *val = reg_data <= 0x2 ? 100 : reg_data * 50;
+
+ return 0;
+}
...
+static int max77705_charger_probe(struct platform_device *pdev)
+{
+ struct power_supply_config pscfg = {};
+ struct i2c_client *i2c_chg;
+ struct max77693_dev *max77705;
+ struct max77705_charger_data *chg;
+ struct device *dev, *parent;
+ struct regmap_irq_chip_data *irq_data;
+ int ret;
+
+ dev = &pdev->dev;
+ parent = dev->parent;
+ max77705 = dev_get_drvdata(parent);
+
+ chg = devm_kzalloc(dev, sizeof(*chg), GFP_KERNEL);
+ if (!chg)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, chg);
+
+ i2c_chg = devm_i2c_new_dummy_device(dev, max77705->i2c->adapter, I2C_ADDR_CHG);
+ if (IS_ERR(i2c_chg))
+ return PTR_ERR(i2c_chg);
+
+ chg->regmap = devm_regmap_init_i2c(i2c_chg, &max77705_chg_regmap_config);
+ if (IS_ERR(chg->regmap))
+ return PTR_ERR(chg->regmap);
+
+ chg->dev = dev;
+
+ ret = regmap_update_bits(chg->regmap,
+ MAX77705_CHG_REG_INT_MASK,
+ MAX77705_CHGIN_IM, 0);
+ if (ret)
+ return ret;
+
+ pscfg.of_node = dev->of_node;
+ pscfg.drv_data = chg;
+
+ chg->psy_chg = devm_power_supply_register(dev, &max77705_charger_psy_desc, &pscfg);
+ if (IS_ERR(chg->psy_chg))
+ return PTR_ERR(chg->psy_chg);
+
+ max77705_charger_irq_chip.irq_drv_data = chg;
+ ret = devm_regmap_add_irq_chip(chg->dev, chg->regmap, max77705->irq,
+ IRQF_ONESHOT | IRQF_SHARED, 0,
+ &max77705_charger_irq_chip,
+ &irq_data);
+ if (ret)
+ dev_err_probe(dev, ret, "failed to add irq chip\n");
+
+ chg->wqueue = create_singlethread_workqueue(dev_name(dev));
+ if (IS_ERR(chg->wqueue))
+ dev_err_probe(dev, PTR_ERR(chg->wqueue), "failed to create workqueue\n");
Is it fine if chg->wqueue is an ERR?
I think that max77705_chgin_irq() won't like it.
Missing return?
Same for the test above. Is it fine to continue if
devm_regmap_add_irq_chip() fails?
+
+ INIT_WORK(&chg->chgin_work, max77705_chgin_isr_work);
+
+ max77705_charger_initialize(chg);
+
+ ret = devm_add_action_or_reset(dev, max77705_charger_disable, chg);
+ if (ret)
+ return ret;
+
+ return max77705_charger_enable(chg);
+}
...
CJ
