From: Sasha Finkelstein <fnkl.kernel@xxxxxxxxx> Add bindings for touchscreen controllers attached using the Z2 protocol. Those are present in most Apple devices. Signed-off-by: Sasha Finkelstein <fnkl.kernel@xxxxxxxxx> --- .../input/touchscreen/apple,z2-multitouch.yaml | 69 ++++++++++++++++++++++ 1 file changed, 69 insertions(+) diff --git a/Documentation/devicetree/bindings/input/touchscreen/apple,z2-multitouch.yaml b/Documentation/devicetree/bindings/input/touchscreen/apple,z2-multitouch.yaml new file mode 100644 index 0000000000000000000000000000000000000000..c4c0b41178728d5e0a782979d6eecd32e0a83618 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/apple,z2-multitouch.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/apple,z2-multitouch.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Apple touchscreens attached using the Z2 protocol + +maintainers: + - Sasha Finkelstein <fnkl.kernel@xxxxxxxxx> + +description: A series of touschscreen controllers used in Apple products + +allOf: + - $ref: touchscreen.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + enum: + - apple,j293-touchbar + - apple,j493-touchbar + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + firmware-name: + maxItems: 1 + + apple,z2-cal-blob: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: + Calibration blob supplied by the bootloader + +required: + - compatible + - interrupts + - reset-gpios + - firmware-name + - touchscreen-size-x + - touchscreen-size-y + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@0 { + compatible = "apple,j293-touchbar"; + reg = <0>; + spi-max-frequency = <11500000>; + reset-gpios = <&pinctrl_ap 139 GPIO_ACTIVE_LOW>; + interrupts-extended = <&pinctrl_ap 194 IRQ_TYPE_EDGE_FALLING>; + firmware-name = "apple/dfrmtfw-j293.bin"; + touchscreen-size-x = <23045>; + touchscreen-size-y = <640>; + }; + }; + +... -- 2.47.1
