Re: [PATCH 3/6] soc: mediatek: pwrap: Add support for MT6735 and MT6328 SoC/PMIC pair

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Tue, Oct 22 2024 at 11:44:46 +02:00:00, AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx> wrote:
Il 21/10/24 16:48, Yassine Oudjana ha scritto:

On Mon, Oct 21 2024 at 15:25:00 +02:00:00, AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx> wrote:
Il 18/10/24 10:10, Yassine Oudjana ha scritto:
From: Yassine Oudjana <y.oudjana@xxxxxxxxxxxxxx>

Add register definitions and configuration for the MT6735 SoC and the MT6328 PMIC which are commonly paired and communicate through the PMIC
wrapper.

Note that the PMIC wrapper on MT6735M has a slightly different register
map and is therefore NOT compatible with MT6735.

Signed-off-by: Yassine Oudjana <y.oudjana@xxxxxxxxxxxxxx>
---
drivers/soc/mediatek/mtk-pmic-wrap.c | 251 ++++++++++++++++++++++++++-
  1 file changed, 248 insertions(+), 3 deletions(-)

diff --git a/drivers/soc/mediatek/mtk-pmic-wrap.c b/drivers/soc/mediatek/mtk- pmic-wrap.c
index 9fdc0ef792026..b9e8dd2a5999d 100644
--- a/drivers/soc/mediatek/mtk-pmic-wrap.c
+++ b/drivers/soc/mediatek/mtk-pmic-wrap.c
@@ -3,6 +3,7 @@
   * Copyright (c) 2014 MediaTek Inc.
   * Author: Flora Fu, MediaTek
   */
+
  #include <linux/clk.h>
  #include <linux/interrupt.h>
  #include <linux/io.h>
@@ -100,7 +101,7 @@ enum dew_regs {
      PWRAP_DEW_CIPHER_MODE,
      PWRAP_DEW_CIPHER_SWRST,
  -    /* MT6323 only regs */
+    /* MT6323 and MT6328 only regs */
      PWRAP_DEW_CIPHER_EN,
      PWRAP_DEW_RDDMY_NO,
  @@ -121,8 +122,10 @@ enum dew_regs {
      PWRAP_RG_SPI_CON13,
      PWRAP_SPISLV_KEY,
  -    /* MT6359 only regs */
+    /* MT6359 and MT6328 only regs */
      PWRAP_DEW_CRC_SWRST,
+
+    /* MT6359 only regs */
      PWRAP_DEW_RG_EN_RECORD,
      PWRAP_DEW_RECORD_CMD0,
      PWRAP_DEW_RECORD_CMD1,
@@ -171,6 +174,23 @@ static const u32 mt6323_regs[] = {
      [PWRAP_DEW_RDDMY_NO] =        0x01a4,
  };
  +static const u32 mt6328_regs[] = {
+    [PWRAP_DEW_DIO_EN] =        0x02d4,
+    [PWRAP_DEW_READ_TEST] =        0x02d6,
+    [PWRAP_DEW_WRITE_TEST] =    0x02d8,
+    [PWRAP_DEW_CRC_SWRST] =        0x02da,
+    [PWRAP_DEW_CRC_EN] =        0x02dc,
+    [PWRAP_DEW_CRC_VAL] =        0x02de,
+    [PWRAP_DEW_MON_GRP_SEL] =    0x02e0,
+    [PWRAP_DEW_CIPHER_KEY_SEL] =    0x02e2,
+    [PWRAP_DEW_CIPHER_IV_SEL] =    0x02e4,
+    [PWRAP_DEW_CIPHER_EN] =        0x02e6,
+    [PWRAP_DEW_CIPHER_RDY] =    0x02e8,
+    [PWRAP_DEW_CIPHER_MODE] =    0x02ea,
+    [PWRAP_DEW_CIPHER_SWRST] =    0x02ec,
+    [PWRAP_DEW_RDDMY_NO] =        0x02ee,
+};
+
  static const u32 mt6331_regs[] = {
      [PWRAP_DEW_DIO_EN] =        0x018c,
      [PWRAP_DEW_READ_TEST] =        0x018e,
@@ -394,7 +414,7 @@ enum pwrap_regs {
      PWRAP_ADC_RDATA_ADDR1,
      PWRAP_ADC_RDATA_ADDR2,
  -    /* MT7622 only regs */
+    /* MT7622 and MT6735 only regs */
      PWRAP_STA,
      PWRAP_CLR,
      PWRAP_DVFS_ADR8,
@@ -417,6 +437,8 @@ enum pwrap_regs {
      PWRAP_ADC_RDATA_ADDR,
      PWRAP_GPS_STA,
      PWRAP_SW_RST,
+
+    /* MT7622 only regs */
      PWRAP_DVFS_STEP_CTRL0,
      PWRAP_DVFS_STEP_CTRL1,
      PWRAP_DVFS_STEP_CTRL2,
@@ -481,6 +503,50 @@ enum pwrap_regs {
      /* MT8516 only regs */
      PWRAP_OP_TYPE,
      PWRAP_MSB_FIRST,
+
+    /* MT6735 only regs */
+    PWRAP_WACS3_EN,
+    PWRAP_INIT_DONE3,
+    PWRAP_WACS3_CMD,
+    PWRAP_WACS3_RDATA,
+    PWRAP_WACS3_VLDCLR,

Are you sure that you need the PWRAP_MD_ADC_xxxx registers in here?

Since MD is relatively big on its own, I'm not sure how to proceed here.. it may make sense to split the MD part to a different array, or it may not... I do need
to understand what's going on.

Can you please point me at some reference code to look at, so that I can understand
the situation a bit?

Besides, I'm noticing that the "MD_ADC_RDATA_ADDR_R(x)" are sequential registers and that's on more than just MT6735: instead of having 32 more entries, it might make more sense to set only the first and declare the number (or size) of regs...

Something like:

enum pwrap_regs {
    .....
    PWRAP_MD_ADC_RDATA_ADDR_LATEST,
    PWRAP_MD_ADC_RDATA_ADDR_WP,
    PWRAP_MD_ADC_RDATA_ADDR_R0,
    PWRAP_MD_ADC_STA0,
    PWRAP_MD_ADC_STA1,
    PWRAP_MD_ADC_STA2
};

static const struct pmic_wrapper_type pwrap_mt6735 = {
    .regs = mt6735_regs,
    .num_md_addr = 32,
    [other stuff]
};

...but again, please, if you can point me at an implementation that actually uses the R(x) registers, that'd be better ... so that we can choose the best
option to add those in there.

Everything else is great: good job :-)

Cheers,
Angelo

I just defined all the registers I could find. We aren't using them for anything yet so it's also fine to keep them out for now.

It seems that in the downstream kernel they are only initialized once and never accessed again. This is the only place I could find where they are accessed: https://gitlab.com/Tooniis/linux-samsung-grandpplte/-/blob/master/drivers/misc/ mediatek/pmic_wrap/mt6735/pwrap_hal.c#L1254-1290



Thanks for pointing me at that reference.

Yeah, looks like they're getting statically initialized to some value, and then nothing else... I wonder if the values that they're writing are just the register
defaults, or if they're actually overriding anything for real...

...that's because, in case those are the defaults, we may get them set by just
resetting the MD, catching two birds with one stone.
That'd be easy to check, anyway, as you can just read them out and see if the
values are these...

The values aren't defaults. The registers all default to 0 and these values are PMIC registers.

Anyway, I'll just remove the registers since I won't need them any time soon.







[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux