Convert the gpio-matrix-keypad bindings from text to DT schema.
Signed-off-by: Markus Burri <markus.burri@xxxxxx>
---
.../bindings/input/gpio-matrix-keypad.txt | 49 ---------
.../bindings/input/gpio-matrix-keypad.yaml | 99 +++++++++++++++++++
2 files changed, 99 insertions(+), 49 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
create mode 100644 Documentation/devicetree/bindings/input/gpio-matrix-keypad.yaml
diff --git a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
deleted file mode 100644
index 570dc10..0000000
--- a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-* GPIO driven matrix keypad device tree bindings
-
-GPIO driven matrix keypad is used to interface a SoC with a matrix keypad.
-The matrix keypad supports multiple row and column lines, a key can be
-placed at each intersection of a unique row and a unique column. The matrix
-keypad can sense a key-press and key-release by means of GPIO lines and
-report the event using GPIO interrupts to the cpu.
-
-Required Properties:
-- compatible: Should be "gpio-matrix-keypad"
-- row-gpios: List of gpios used as row lines. The gpio specifier
- for this property depends on the gpio controller to
- which these row lines are connected.
-- col-gpios: List of gpios used as column lines. The gpio specifier
- for this property depends on the gpio controller to
- which these column lines are connected.
-- linux,keymap: The definition can be found at
- bindings/input/matrix-keymap.txt
-
-Optional Properties:
-- linux,no-autorepeat: do no enable autorepeat feature.
-- wakeup-source: use any event on keypad as wakeup event.
- (Legacy property supported: "linux,wakeup")
-- debounce-delay-ms: debounce interval in milliseconds
-- col-scan-delay-us: delay, measured in microseconds, that is needed
- before we can scan keypad after activating column gpio
-- drive-inactive-cols: drive inactive columns during scan,
- default is to turn inactive columns into inputs.
-
-Example:
- matrix-keypad {
- compatible = "gpio-matrix-keypad";
- debounce-delay-ms = <5>;
- col-scan-delay-us = <2>;
-
- row-gpios = <&gpio2 25 0
- &gpio2 26 0
- &gpio2 27 0>;
-
- col-gpios = <&gpio2 21 0
- &gpio2 22 0>;
-
- linux,keymap = <0x0000008B
- 0x0100009E
- 0x02000069
- 0x0001006A
- 0x0101001C
- 0x0201006C>;
- };
diff --git a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.yaml b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.yaml
new file mode 100644
index 0000000..745652b
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/input/gpio-matrix-keypad.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO matrix keypad
+
+description: |
+ GPIO driven matrix keypad is used to interface a SoC with a matrix keypad.
+ The matrix keypad supports multiple row and column lines, a key can be
+ placed at each intersection of a unique row and a unique column. The matrix
+ keypad can sense a key-press and key-release by means of GPIO lines and
+ report the event using GPIO interrupts to the cpu.
+
+maintainers:
+ - Marek Vasut <marek.vasut@xxxxxxxxx>
+
+properties:
+ compatible:
+ const: gpio-matrix-keypad
+
+ row-gpios:
+ description: |
+ List of GPIOs used as row lines. The gpio specifier
+ for this property depends on the gpio controller to
+ which these row lines are connected.
+
+ col-gpios:
+ description: |
+ List of GPIOs used as column lines. The gpio specifier
+ for this property depends on the gpio controller to
+ which these column lines are connected.
+
+ linux,keymap:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description: |
+ An array of packed 1-cell entries containing the equivalent of row,
+ column and linux key-code. The 32-bit big endian cell is packed as:
+ row << 24 | column << 16 | key-code
+
+ linux,no-autorepeat:
+ type: boolean
+ description: Do not enable autorepeat feature.
+ default: false
+
+ wakeup-source:
+ description: |
+ Use any event on keypad as wakeup event.
+ (Legacy property supported: "linux,wakeup")
+ default: false
+
+ debounce-delay-ms:
+ description: Debounce interval in milliseconds.
+ default: 0
+
+ col-scan-delay-us:
+ description: |
+ Delay, measured in microseconds, that is needed
+ before we can scan keypad after activating column gpio.
+ default: 0
+
+ drive-inactive-cols:
+ type: boolean
+ description: |
+ Drive inactive columns during scan,
+ default is to turn inactive columns into inputs.
+ default: false
+
+required:
+ - compatible
+ - row-gpios
+ - col-gpios
+ - linux,keymap
+
+additionalProperties: false
+
+examples:
+ - |
+ matrix-keypad {
+ compatible = "gpio-matrix-keypad";
+ debounce-delay-ms = <5>;
+ col-scan-delay-us = <2>;
+
+ row-gpios = <&gpio2 25 0
+ &gpio2 26 0
+ &gpio2 27 0>;
+
+ col-gpios = <&gpio2 21 0
+ &gpio2 22 0>;
+
+ linux,keymap = <0x0000008B
+ 0x0100009E
+ 0x02000069
+ 0x0001006A
+ 0x0101001C
+ 0x0201006C>;
+ };
--
2.39.5
