The capacity level mappings are taken from: https://support.steelseries.com/hc/en-us/articles/360049205612-How-do-I-know-the-Arctis-battery-level-how-do-I-charge-the-Arctis Even if we have a percentage, exporting a capacity_level that matches with the hardware warning levels means that upower can show warnings at the same time as the hardware. So the headset starts beeping at the same time as the critical warning notification appears :eyeroll: Signed-off-by: Bastien Nocera <hadess@xxxxxxxxxx> --- drivers/hid/hid-steelseries.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/hid/hid-steelseries.c b/drivers/hid/hid-steelseries.c index 16138f7dae17..f9ff5be94309 100644 --- a/drivers/hid/hid-steelseries.c +++ b/drivers/hid/hid-steelseries.c @@ -411,6 +411,15 @@ static void steelseries_headset_fetch_battery(struct hid_device *hdev) "Battery query failed (err: %d)\n", ret); } +static int battery_capacity_to_level(int capacity) +{ + if (capacity >= 50) + return POWER_SUPPLY_CAPACITY_LEVEL_NORMAL; + if (capacity >= 20) + return POWER_SUPPLY_CAPACITY_LEVEL_LOW; + return POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL; +} + static void steelseries_headset_battery_timer_tick(struct work_struct *work) { struct steelseries_device *sd = container_of(work, @@ -442,6 +451,9 @@ static int steelseries_headset_battery_get_property(struct power_supply *psy, case POWER_SUPPLY_PROP_CAPACITY: val->intval = sd->battery_capacity; break; + case POWER_SUPPLY_PROP_CAPACITY_LEVEL: + val->intval = battery_capacity_to_level(sd->battery_capacity); + break; default: ret = -EINVAL; break; @@ -469,6 +481,7 @@ static enum power_supply_property steelseries_headset_battery_props[] = { POWER_SUPPLY_PROP_STATUS, POWER_SUPPLY_PROP_SCOPE, POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_CAPACITY_LEVEL, }; static int steelseries_headset_battery_register(struct steelseries_device *sd) -- 2.47.0
