This commit fixes several typographical errors in comments within
the driver/input directory. No functional changes are made.
Detected using codespell.
Signed-off-by: Yu Jiaoliang <yujiaoliang@xxxxxxxx>
---
drivers/input/touchscreen/auo-pixcir-ts.c | 2 +-
drivers/input/touchscreen/bcm_iproc_tsc.c | 2 +-
drivers/input/touchscreen/edt-ft5x06.c | 2 +-
drivers/input/touchscreen/ili210x.c | 2 +-
drivers/input/touchscreen/pixcir_i2c_ts.c | 2 +-
drivers/input/touchscreen/rohm_bu21023.c | 4 ++--
drivers/input/touchscreen/stmpe-ts.c | 4 ++--
drivers/input/touchscreen/wm97xx-core.c | 4 ++--
8 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/input/touchscreen/auo-pixcir-ts.c b/drivers/input/touchscreen/auo-pixcir-ts.c
index 8db2a112a476..363a4a1f1560 100644
--- a/drivers/input/touchscreen/auo-pixcir-ts.c
+++ b/drivers/input/touchscreen/auo-pixcir-ts.c
@@ -72,7 +72,7 @@
/*
* Interrupt modes:
- * periodical: interrupt is asserted periodicaly
+ * periodical: interrupt is asserted periodically
* compare coordinates: interrupt is asserted when coordinates change
* indicate touch: interrupt is asserted during touch
*/
diff --git a/drivers/input/touchscreen/bcm_iproc_tsc.c b/drivers/input/touchscreen/bcm_iproc_tsc.c
index 9c84235327bf..e49bde50d77a 100644
--- a/drivers/input/touchscreen/bcm_iproc_tsc.c
+++ b/drivers/input/touchscreen/bcm_iproc_tsc.c
@@ -217,7 +217,7 @@ static irqreturn_t iproc_touchscreen_interrupt(int irq, void *data)
"pen up-down (%d)\n", priv->pen_status);
}
- /* coordinates in FIFO exceed the theshold */
+ /* coordinates in FIFO exceed the threshold */
if (intr_status & TS_FIFO_INTR_MASK) {
for (i = 0; i < priv->cfg_params.fifo_threshold; i++) {
regmap_read(priv->regmap, FIFO_DATA, &raw_coordinate);
diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
index e70415f189a5..8c77e9f347c5 100644
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -1219,7 +1219,7 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client)
}
/*
- * Check which sleep modes we can support. Power-off requieres the
+ * Check which sleep modes we can support. Power-off requires the
* reset-pin to ensure correct power-down/power-up behaviour. Start with
* the EDT_PMODE_POWEROFF test since this is the deepest possible sleep
* mode.
diff --git a/drivers/input/touchscreen/ili210x.c b/drivers/input/touchscreen/ili210x.c
index 4573844c3395..a8ecd0f980cb 100644
--- a/drivers/input/touchscreen/ili210x.c
+++ b/drivers/input/touchscreen/ili210x.c
@@ -898,7 +898,7 @@ static umode_t ili210x_attributes_visible(struct kobject *kobj,
if (attr == &dev_attr_calibrate.attr)
return priv->chip->has_calibrate_reg ? attr->mode : 0;
- /* Firmware/Kernel/Protocol/BootMode is implememted only for ILI251x */
+ /* Firmware/Kernel/Protocol/BootMode is implemented only for ILI251x */
if (!priv->chip->has_firmware_proto)
return 0;
diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
index 4ede0687beb0..1ea0b12b2635 100644
--- a/drivers/input/touchscreen/pixcir_i2c_ts.c
+++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
@@ -44,7 +44,7 @@ enum pixcir_power_mode {
/*
* Interrupt modes:
- * periodical: interrupt is asserted periodicaly
+ * periodical: interrupt is asserted periodically
* diff coordinates: interrupt is asserted when coordinates change
* level on touch: interrupt level asserted during touch
* pulse on touch: interrupt pulse asserted during touch
diff --git a/drivers/input/touchscreen/rohm_bu21023.c b/drivers/input/touchscreen/rohm_bu21023.c
index 0e5cc9fbad17..295d8d75ba32 100644
--- a/drivers/input/touchscreen/rohm_bu21023.c
+++ b/drivers/input/touchscreen/rohm_bu21023.c
@@ -388,13 +388,13 @@ static int rohm_ts_manual_calibration(struct rohm_ts_data *ts)
err_y = (int)READ_CALIB_BUF(PRM1_Y_H) << 2 |
READ_CALIB_BUF(PRM1_Y_L);
- /* X axis ajust */
+ /* X axis adjust */
if (err_x <= 4)
calib_x -= AXIS_ADJUST;
else if (err_x >= 60)
calib_x += AXIS_ADJUST;
- /* Y axis ajust */
+ /* Y axis adjust */
if (err_y <= 4)
calib_y -= AXIS_ADJUST;
else if (err_y >= 60)
diff --git a/drivers/input/touchscreen/stmpe-ts.c b/drivers/input/touchscreen/stmpe-ts.c
index b204fdb2d22c..2228842dfb49 100644
--- a/drivers/input/touchscreen/stmpe-ts.c
+++ b/drivers/input/touchscreen/stmpe-ts.c
@@ -107,7 +107,7 @@ static void stmpe_work(struct work_struct *work)
/*
* touch_det sometimes get desasserted or just get stuck. This appears
- * to be a silicon bug, We still have to clearify this with the
+ * to be a silicon bug, We still have to clarify this with the
* manufacture. As a workaround We release the key anyway if the
* touch_det keeps coming in after 4ms, while the FIFO contains no value
* during the whole time.
@@ -140,7 +140,7 @@ static irqreturn_t stmpe_ts_handler(int irq, void *data)
/*
* The FIFO sometimes just crashes and stops generating interrupts. This
- * appears to be a silicon bug. We still have to clearify this with
+ * appears to be a silicon bug. We still have to clarify this with
* the manufacture. As a workaround we disable the TSC while we are
* collecting data and flush the FIFO after reading
*/
diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
index f01f6cc9b59f..91384ad1aa40 100644
--- a/drivers/input/touchscreen/wm97xx-core.c
+++ b/drivers/input/touchscreen/wm97xx-core.c
@@ -222,7 +222,7 @@ EXPORT_SYMBOL_GPL(wm97xx_set_gpio);
/*
* Codec GPIO pin configuration, this sets pin direction, polarity,
- * stickyness and wake up.
+ * stickiness and wake up.
*/
void wm97xx_config_gpio(struct wm97xx *wm, u32 gpio, enum wm97xx_gpio_dir dir,
enum wm97xx_gpio_pol pol, enum wm97xx_gpio_sticky sticky,
@@ -403,7 +403,7 @@ static int wm97xx_read_samples(struct wm97xx *wm)
* is actively working with the touchscreen we
* don't want to lose the quick response. So we
* will slowly increase sleep time after the
- * pen is up and quicky restore it to ~one task
+ * pen is up and quickly restore it to ~one task
* switch when pen is down again.
*/
if (wm->ts_reader_interval < HZ / 10)
--
2.34.1
