The different revisions of the Zinitix BTXXX touchscreens place
the icon status register (to read out touchkey status) in
different places. Use the chip revision bits to discern
between the different versions at runtime.
This makes touchkeys work on the BT404 on the Samsung Codina
GT-I8160 mobile phone.
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
ChangeLog v1->v2:
- No changes
---
drivers/input/touchscreen/zinitix.c | 25 +++++++++++++++++++++++--
1 file changed, 23 insertions(+), 2 deletions(-)
diff --git a/drivers/input/touchscreen/zinitix.c b/drivers/input/touchscreen/zinitix.c
index e47e0bff80db..b6b380f5aed5 100644
--- a/drivers/input/touchscreen/zinitix.c
+++ b/drivers/input/touchscreen/zinitix.c
@@ -35,7 +35,13 @@
#define ZINITIX_DEBUG_REG 0x0115 /* 0~7 */
#define ZINITIX_TOUCH_MODE 0x0010
+
#define ZINITIX_CHIP_REVISION 0x0011
+#define ZINITIX_CHIP_BTX0X_MASK 0xF0F0
+#define ZINITIX_CHIP_BT4X2 0x4020
+#define ZINITIX_CHIP_BT4X3 0x4030
+#define ZINITIX_CHIP_BT4X4 0x4040
+
#define ZINITIX_FIRMWARE_VERSION 0x0012
#define ZINITIX_USB_DETECT 0x116
@@ -63,7 +69,11 @@
#define ZINITIX_Y_RESOLUTION 0x00C1
#define ZINITIX_POINT_STATUS_REG 0x0080
-#define ZINITIX_ICON_STATUS_REG 0x00AA
+
+#define ZINITIX_BT4X2_ICON_STATUS_REG 0x009A
+#define ZINITIX_BT4X3_ICON_STATUS_REG 0x00A0
+#define ZINITIX_BT4X4_ICON_STATUS_REG 0x00A0
+#define ZINITIX_BT5XX_ICON_STATUS_REG 0x00AA
#define ZINITIX_POINT_COORD_REG (ZINITIX_POINT_STATUS_REG + 2)
@@ -425,7 +435,18 @@ static irqreturn_t zinitix_ts_irq_handler(int irq, void *bt541_handler)
}
if (le16_to_cpu(touch_event.status) & BIT_ICON_EVENT) {
- error = zinitix_read_data(bt541->client, ZINITIX_ICON_STATUS_REG,
+ u16 iconstatus;
+
+ if ((bt541->chip_revision & ZINITIX_CHIP_BTX0X_MASK) == ZINITIX_CHIP_BT4X2)
+ iconstatus = ZINITIX_BT4X2_ICON_STATUS_REG;
+ else if ((bt541->chip_revision & ZINITIX_CHIP_BTX0X_MASK) == ZINITIX_CHIP_BT4X3)
+ iconstatus = ZINITIX_BT4X3_ICON_STATUS_REG;
+ else if ((bt541->chip_revision & ZINITIX_CHIP_BTX0X_MASK) == ZINITIX_CHIP_BT4X4)
+ iconstatus = ZINITIX_BT4X4_ICON_STATUS_REG;
+ else
+ iconstatus = ZINITIX_BT5XX_ICON_STATUS_REG;
+
+ error = zinitix_read_data(bt541->client, iconstatus,
&icon_events, sizeof(icon_events));
if (error) {
dev_err(&client->dev, "Failed to read icon events\n");
--
2.46.0
