The automatically generated names for the LEDs from color and function
do not match nicely for the 4 hdds, so set them manually per the label
property to also match the LEDs generated from the MCU.
Signed-off-by: Heiko Stuebner <heiko@xxxxxxxxx>
---
arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
index 4bc5f5691d45..7bd32d230ad2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
@@ -50,6 +50,7 @@ led-0 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_DISK;
gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>;
+ label = "hdd1:green:disk";
linux,default-trigger = "disk-activity";
pinctrl-names = "default";
pinctrl-0 = <&hdd1_led_pin>;
@@ -59,6 +60,7 @@ led-1 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_DISK;
gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>;
+ label = "hdd2:green:disk";
linux,default-trigger = "disk-activity";
pinctrl-names = "default";
pinctrl-0 = <&hdd2_led_pin>;
@@ -68,6 +70,7 @@ led-2 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_DISK;
gpios = <&gpio1 RK_PD7 GPIO_ACTIVE_LOW>;
+ label = "hdd3:green:disk";
linux,default-trigger = "disk-activity";
pinctrl-names = "default";
pinctrl-0 = <&hdd3_led_pin>;
@@ -77,6 +80,7 @@ led-3 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_DISK;
gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
+ label = "hdd4:green:disk";
linux,default-trigger = "disk-activity";
pinctrl-names = "default";
pinctrl-0 = <&hdd4_led_pin>;
--
2.43.0
