Convert binding doc colibri-vf50-ts.txt to yaml.
Additional change:
- add ref touchscreen.yaml.
- remove standard pinctrl properties.
Fix below warning:
arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dtb: /touchscreen:
failed to match any schema with compatible: ['toradex,vf50-touchscreen']
Reviewed-by: Rob Herring (Arm) <robh@xxxxxxxxxx>
Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
---
Change from v2 to v3
- raname to toradex,vf50-touchscreen.yaml
- Add Rob's review tag
Change from v1 to v2
- fix missed required properties
- use original submitter and input maintainer
- add value limitted vf50-ts-min-pressure, just provide rough range, which
not mention in original doc
- fix style problem in example
---
.../input/touchscreen/colibri-vf50-ts.txt | 34 --------
.../touchscreen/toradex,vf50-touchscreen.yaml | 78 +++++++++++++++++++
2 files changed, 78 insertions(+), 34 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/toradex,vf50-touchscreen.yaml
diff --git a/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
deleted file mode 100644
index ca304357c374a..0000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-* Toradex Colibri VF50 Touchscreen driver
-
-Required Properties:
-- compatible must be toradex,vf50-touchscreen
-- io-channels: adc channels being used by the Colibri VF50 module
- IIO ADC for Y-, X-, Y+, X+ connections
-- xp-gpios: FET gate driver for input of X+
-- xm-gpios: FET gate driver for input of X-
-- yp-gpios: FET gate driver for input of Y+
-- ym-gpios: FET gate driver for input of Y-
-- interrupts: pen irq interrupt for touch detection, signal from X plate
-- pinctrl-names: "idle", "default"
-- pinctrl-0: pinctrl node for pen/touch detection, pinctrl must provide
- pull-up resistor on X+, X-.
-- pinctrl-1: pinctrl node for X/Y and pressure measurement (ADC) state pinmux
-- vf50-ts-min-pressure: pressure level at which to stop measuring X/Y values
-
-Example:
-
- touchctrl: vf50_touchctrl {
- compatible = "toradex,vf50-touchscreen";
- io-channels = <&adc1 0>,<&adc0 0>,
- <&adc0 1>,<&adc1 2>;
- xp-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- xm-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
- yp-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- ym-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
- interrupt-parent = <&gpio0>;
- interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "idle","default";
- pinctrl-0 = <&pinctrl_touchctrl_idle>, <&pinctrl_touchctrl_gpios>;
- pinctrl-1 = <&pinctrl_touchctrl_default>, <&pinctrl_touchctrl_gpios>;
- vf50-ts-min-pressure = <200>;
- };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/toradex,vf50-touchscreen.yaml b/Documentation/devicetree/bindings/input/touchscreen/toradex,vf50-touchscreen.yaml
new file mode 100644
index 0000000000000..69da21d40e729
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/toradex,vf50-touchscreen.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/toradex,vf50-touchscreen.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toradex Colibri VF50 Touchscreen
+
+maintainers:
+ - Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
+ - Sanchayan Maity <maitysanchayan@xxxxxxxxx>
+
+properties:
+ compatible:
+ const: toradex,vf50-touchscreen
+
+ interrupts:
+ maxItems: 1
+
+ io-channels:
+ maxItems: 4
+ description:
+ adc channels being used by the Colibri VF50 module
+ IIO ADC for Y-, X-, Y+, X+ connections
+
+ xp-gpios:
+ description: FET gate driver for input of X+
+
+ xm-gpios:
+ description: FET gate driver for input of X-
+
+ yp-gpios:
+ description: FET gate driver for input of Y+
+
+ ym-gpios:
+ description: FET gate driver for input of Y-
+
+ vf50-ts-min-pressure:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 50
+ maximum: 2000
+ description: pressure level at which to stop measuring X/Y values
+
+required:
+ - compatible
+ - io-channels
+ - xp-gpios
+ - xm-gpios
+ - yp-gpios
+ - ym-gpios
+ - interrupts
+ - vf50-ts-min-pressure
+
+allOf:
+ - $ref: touchscreen.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/gpio/gpio.h>
+
+ touchscreen {
+ compatible = "toradex,vf50-touchscreen";
+ interrupt-parent = <&gpio0>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+ io-channels = <&adc1 0>, <&adc0 0>, <&adc0 1>, <&adc1 2>;
+ xp-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ xm-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+ yp-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ ym-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "idle", "default";
+ pinctrl-0 = <&pinctrl_touchctrl_idle>, <&pinctrl_touchctrl_gpios>;
+ pinctrl-1 = <&pinctrl_touchctrl_default>, <&pinctrl_touchctrl_gpios>;
+ vf50-ts-min-pressure = <200>;
+ };
+
--
2.34.1
