Convert binding doc ad7879.txt to yaml format.
Additional change:
- Add ref to /schemas/spi/spi-peripheral-props.yaml
- Add #gpio-cell
- Remove spi-cpol and spi-cpha in example, the place hold 'spi' can't
correct detect spi-controler.yaml. So these two properties can't
be recongnized.
Fix warning:
arch/arm64/boot/dts/freescale/imx8dx-colibri-aster.dtb:
/bus@5a000000/i2c@5a800000/touchscreen@2c: failed to match any schema with compatible: ['adi,ad7879-1']
Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
---
Change from v1 to v2:
- add default 0
---
.../bindings/input/touchscreen/ad7879.txt | 71 ---------
.../input/touchscreen/adi,ad7879.yaml | 150 ++++++++++++++++++
2 files changed, 150 insertions(+), 71 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/ad7879.txt
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/adi,ad7879.yaml
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ad7879.txt b/Documentation/devicetree/bindings/input/touchscreen/ad7879.txt
deleted file mode 100644
index afa38dc069f01..0000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/ad7879.txt
+++ /dev/null
@@ -1,71 +0,0 @@
-* Analog Devices AD7879(-1)/AD7889(-1) touchscreen interface (SPI/I2C)
-
-Required properties:
-- compatible : for SPI slave, use "adi,ad7879"
- for I2C slave, use "adi,ad7879-1"
-- reg : SPI chipselect/I2C slave address
- See spi-bus.txt for more SPI slave properties
-- interrupts : touch controller interrupt
-- touchscreen-max-pressure : maximum reported pressure
-- adi,resistance-plate-x : total resistance of X-plate (for pressure
- calculation)
-Optional properties:
-- touchscreen-swapped-x-y : X and Y axis are swapped (boolean)
-- adi,first-conversion-delay : 0-12: In 128us steps (starting with 128us)
- 13 : 2.560ms
- 14 : 3.584ms
- 15 : 4.096ms
- This property has to be a '/bits/ 8' value
-- adi,acquisition-time : 0: 2us
- 1: 4us
- 2: 8us
- 3: 16us
- This property has to be a '/bits/ 8' value
-- adi,median-filter-size : 0: disabled
- 1: 4 measurements
- 2: 8 measurements
- 3: 16 measurements
- This property has to be a '/bits/ 8' value
-- adi,averaging : 0: 2 middle values (1 if median disabled)
- 1: 4 middle values
- 2: 8 middle values
- 3: 16 values
- This property has to be a '/bits/ 8' value
-- adi,conversion-interval: : 0 : convert one time only
- 1-255: 515us + val * 35us (up to 9.440ms)
- This property has to be a '/bits/ 8' value
-- gpio-controller : Switch AUX/VBAT/GPIO pin to GPIO mode
-
-Example:
-
- touchscreen0@2c {
- compatible = "adi,ad7879-1";
- reg = <0x2c>;
- interrupt-parent = <&gpio1>;
- interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
- touchscreen-max-pressure = <4096>;
- adi,resistance-plate-x = <120>;
- adi,first-conversion-delay = /bits/ 8 <3>;
- adi,acquisition-time = /bits/ 8 <1>;
- adi,median-filter-size = /bits/ 8 <2>;
- adi,averaging = /bits/ 8 <1>;
- adi,conversion-interval = /bits/ 8 <255>;
- };
-
- touchscreen1@1 {
- compatible = "adi,ad7879";
- spi-max-frequency = <5000000>;
- reg = <1>;
- spi-cpol;
- spi-cpha;
- gpio-controller;
- interrupt-parent = <&gpio1>;
- interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
- touchscreen-max-pressure = <4096>;
- adi,resistance-plate-x = <120>;
- adi,first-conversion-delay = /bits/ 8 <3>;
- adi,acquisition-time = /bits/ 8 <1>;
- adi,median-filter-size = /bits/ 8 <2>;
- adi,averaging = /bits/ 8 <1>;
- adi,conversion-interval = /bits/ 8 <255>;
- };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/adi,ad7879.yaml b/Documentation/devicetree/bindings/input/touchscreen/adi,ad7879.yaml
new file mode 100644
index 0000000000000..caa5fa3cc3f1f
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/adi,ad7879.yaml
@@ -0,0 +1,150 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/adi,ad7879.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7879(-1)/AD7889(-1) touchscreen interface (SPI/I2C)
+
+maintainers:
+ - Frank Li <Frank.Li@xxxxxxx>
+
+properties:
+ compatible:
+ description: |
+ for SPI slave, use "adi,ad7879"
+ for I2C slave, use "adi,ad7879-1"
+ enum:
+ - adi,ad7879
+ - adi,ad7879-1
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ touchscreen-max-pressure:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: maximum reported pressure
+
+ adi,resistance-plate-x:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: total resistance of X-plate (for pressure calculation)
+
+ touchscreen-swapped-x-y:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: X and Y axis are swapped (boolean)
+
+ adi,first-conversion-delay:
+ $ref: /schemas/types.yaml#/definitions/uint8
+ default: 0
+ minimum: 0
+ maximum: 15
+ description: |
+ 0-12: In 128us steps (starting with 128us)
+ 13 : 2.560ms
+ 14 : 3.584ms
+ 15 : 4.096ms
+ This property has to be a '/bits/ 8' value
+
+ adi,acquisition-time:
+ $ref: /schemas/types.yaml#/definitions/uint8
+ default: 0
+ enum: [0, 1, 2, 3]
+ description: |
+ 0: 2us
+ 1: 4us
+ 2: 8us
+ 3: 16us
+ This property has to be a '/bits/ 8' value
+
+ adi,median-filter-size:
+ $ref: /schemas/types.yaml#/definitions/uint8
+ default: 0
+ enum: [0, 1, 2, 3]
+ description: |
+ 0: disabled
+ 1: 4 measurements
+ 2: 8 measurements
+ 3: 16 measurements
+ This property has to be a '/bits/ 8' value
+
+ adi,averaging:
+ $ref: /schemas/types.yaml#/definitions/uint8
+ default: 0
+ enum: [0, 1, 2, 3]
+ description: |
+ 0: 2 middle values (1 if median disabled)
+ 1: 4 middle values
+ 2: 8 middle values
+ 3: 16 values
+ This property has to be a '/bits/ 8' value
+
+ adi,conversion-interval:
+ $ref: /schemas/types.yaml#/definitions/uint8
+ default: 0
+ description: |
+ 0 : convert one time only
+ 1-255: 515us + val * 35us (up to 9.440ms)
+ This property has to be a '/bits/ 8' value
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 1
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchscreen0@2c {
+ compatible = "adi,ad7879-1";
+ reg = <0x2c>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+ touchscreen-max-pressure = <4096>;
+ adi,resistance-plate-x = <120>;
+ adi,first-conversion-delay = /bits/ 8 <3>;
+ adi,acquisition-time = /bits/ 8 <1>;
+ adi,median-filter-size = /bits/ 8 <2>;
+ adi,averaging = /bits/ 8 <1>;
+ adi,conversion-interval = /bits/ 8 <255>;
+ };
+ };
+
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchscreen1@1 {
+ compatible = "adi,ad7879";
+ reg = <1>;
+ spi-max-frequency = <5000000>;
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+ touchscreen-max-pressure = <4096>;
+ adi,resistance-plate-x = <120>;
+ adi,first-conversion-delay = /bits/ 8 <3>;
+ adi,acquisition-time = /bits/ 8 <1>;
+ adi,median-filter-size = /bits/ 8 <2>;
+ adi,averaging = /bits/ 8 <1>;
+ adi,conversion-interval = /bits/ 8 <255>;
+ };
+ };
--
2.34.1
