Palm Top PC 110 is a handheld personal computer with 80486SX CPU that
was released exclusively in Japan in September 1995.
While the kernel still supports 486 CPU it is highly unlikely that
anyone is using this device with the latest kernel.
Remove the driver.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
---
drivers/input/mouse/Kconfig | 10 ---
drivers/input/mouse/Makefile | 1 -
drivers/input/mouse/pc110pad.c | 160 ---------------------------------
3 files changed, 171 deletions(-)
delete mode 100644 drivers/input/mouse/pc110pad.c
diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
index f660e6ba24c2..7b7053c57588 100644
--- a/drivers/input/mouse/Kconfig
+++ b/drivers/input/mouse/Kconfig
@@ -312,16 +312,6 @@ config MOUSE_ELAN_I2C_SMBUS
If unsure, say Y.
-config MOUSE_PC110PAD
- tristate "IBM PC110 touchpad"
- depends on ISA
- help
- Say Y if you have the IBM PC-110 micro-notebook and want its
- touchpad supported.
-
- To compile this driver as a module, choose M here: the
- module will be called pc110pad.
-
config MOUSE_AMIGA
tristate "Amiga mouse"
depends on AMIGA
diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile
index e745b64fed49..4f9fb7d87a37 100644
--- a/drivers/input/mouse/Makefile
+++ b/drivers/input/mouse/Makefile
@@ -13,7 +13,6 @@ obj-$(CONFIG_MOUSE_CYAPA) += cyapatp.o
obj-$(CONFIG_MOUSE_ELAN_I2C) += elan_i2c.o
obj-$(CONFIG_MOUSE_GPIO) += gpio_mouse.o
obj-$(CONFIG_MOUSE_MAPLE) += maplemouse.o
-obj-$(CONFIG_MOUSE_PC110PAD) += pc110pad.o
obj-$(CONFIG_MOUSE_PS2) += psmouse.o
obj-$(CONFIG_MOUSE_RISCPC) += rpcmouse.o
obj-$(CONFIG_MOUSE_SERIAL) += sermouse.o
diff --git a/drivers/input/mouse/pc110pad.c b/drivers/input/mouse/pc110pad.c
deleted file mode 100644
index efa58049f746..000000000000
--- a/drivers/input/mouse/pc110pad.c
+++ /dev/null
@@ -1,160 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2000-2001 Vojtech Pavlik
- *
- * Based on the work of:
- * Alan Cox Robin O'Leary
- */
-
-/*
- * IBM PC110 touchpad driver for Linux
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/input.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-
-MODULE_AUTHOR("Vojtech Pavlik <vojtech@xxxxxx>");
-MODULE_DESCRIPTION("IBM PC110 touchpad driver");
-MODULE_LICENSE("GPL");
-
-#define PC110PAD_OFF 0x30
-#define PC110PAD_ON 0x38
-
-static int pc110pad_irq = 10;
-static int pc110pad_io = 0x15e0;
-
-static struct input_dev *pc110pad_dev;
-static int pc110pad_data[3];
-static int pc110pad_count;
-
-static irqreturn_t pc110pad_interrupt(int irq, void *ptr)
-{
- int value = inb_p(pc110pad_io);
- int handshake = inb_p(pc110pad_io + 2);
-
- outb(handshake | 1, pc110pad_io + 2);
- udelay(2);
- outb(handshake & ~1, pc110pad_io + 2);
- udelay(2);
- inb_p(0x64);
-
- pc110pad_data[pc110pad_count++] = value;
-
- if (pc110pad_count < 3)
- return IRQ_HANDLED;
-
- input_report_key(pc110pad_dev, BTN_TOUCH,
- pc110pad_data[0] & 0x01);
- input_report_abs(pc110pad_dev, ABS_X,
- pc110pad_data[1] | ((pc110pad_data[0] << 3) & 0x80) | ((pc110pad_data[0] << 1) & 0x100));
- input_report_abs(pc110pad_dev, ABS_Y,
- pc110pad_data[2] | ((pc110pad_data[0] << 4) & 0x80));
- input_sync(pc110pad_dev);
-
- pc110pad_count = 0;
- return IRQ_HANDLED;
-}
-
-static void pc110pad_close(struct input_dev *dev)
-{
- outb(PC110PAD_OFF, pc110pad_io + 2);
-}
-
-static int pc110pad_open(struct input_dev *dev)
-{
- pc110pad_interrupt(0, NULL);
- pc110pad_interrupt(0, NULL);
- pc110pad_interrupt(0, NULL);
- outb(PC110PAD_ON, pc110pad_io + 2);
- pc110pad_count = 0;
-
- return 0;
-}
-
-/*
- * We try to avoid enabling the hardware if it's not
- * there, but we don't know how to test. But we do know
- * that the PC110 is not a PCI system. So if we find any
- * PCI devices in the machine, we don't have a PC110.
- */
-static int __init pc110pad_init(void)
-{
- int err;
-
- if (!no_pci_devices())
- return -ENODEV;
-
- if (!request_region(pc110pad_io, 4, "pc110pad")) {
- printk(KERN_ERR "pc110pad: I/O area %#x-%#x in use.\n",
- pc110pad_io, pc110pad_io + 4);
- return -EBUSY;
- }
-
- outb(PC110PAD_OFF, pc110pad_io + 2);
-
- if (request_irq(pc110pad_irq, pc110pad_interrupt, 0, "pc110pad", NULL)) {
- printk(KERN_ERR "pc110pad: Unable to get irq %d.\n", pc110pad_irq);
- err = -EBUSY;
- goto err_release_region;
- }
-
- pc110pad_dev = input_allocate_device();
- if (!pc110pad_dev) {
- printk(KERN_ERR "pc110pad: Not enough memory.\n");
- err = -ENOMEM;
- goto err_free_irq;
- }
-
- pc110pad_dev->name = "IBM PC110 TouchPad";
- pc110pad_dev->phys = "isa15e0/input0";
- pc110pad_dev->id.bustype = BUS_ISA;
- pc110pad_dev->id.vendor = 0x0003;
- pc110pad_dev->id.product = 0x0001;
- pc110pad_dev->id.version = 0x0100;
-
- pc110pad_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
- pc110pad_dev->absbit[0] = BIT_MASK(ABS_X) | BIT_MASK(ABS_Y);
- pc110pad_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
-
- input_abs_set_max(pc110pad_dev, ABS_X, 0x1ff);
- input_abs_set_max(pc110pad_dev, ABS_Y, 0x0ff);
-
- pc110pad_dev->open = pc110pad_open;
- pc110pad_dev->close = pc110pad_close;
-
- err = input_register_device(pc110pad_dev);
- if (err)
- goto err_free_dev;
-
- return 0;
-
- err_free_dev:
- input_free_device(pc110pad_dev);
- err_free_irq:
- free_irq(pc110pad_irq, NULL);
- err_release_region:
- release_region(pc110pad_io, 4);
-
- return err;
-}
-
-static void __exit pc110pad_exit(void)
-{
- outb(PC110PAD_OFF, pc110pad_io + 2);
- free_irq(pc110pad_irq, NULL);
- input_unregister_device(pc110pad_dev);
- release_region(pc110pad_io, 4);
-}
-
-module_init(pc110pad_init);
-module_exit(pc110pad_exit);
--
2.46.0.76.ge559c4bf1a-goog
