From: Stefan Eichenberger <stefan.eichenberger@xxxxxxxxxxx>
Add a new property to indicate that the device should power off rather
than use deep sleep. Deep sleep is a feature of the controller that
expects the controller to remain powered in suspend. However, if a
display shares its regulator with the touch controller, we may want to
do a power off so that the display and touch controller do not use any
power.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@xxxxxxxxxxx>
Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Reviewed-by: Joao Paulo Goncalves <joao.goncalves@xxxxxxxxxxx>
---
Documentation/devicetree/bindings/input/atmel,maxtouch.yaml | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
index c40799355ed75..8de5f539b30e3 100644
--- a/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
+++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
@@ -87,6 +87,12 @@ properties:
- 2 # ATMEL_MXT_WAKEUP_GPIO
default: 0
+ atmel,poweroff-sleep:
+ description: |
+ Instead of using the deep sleep feature of the maXTouch controller,
+ poweroff the regulators.
+ type: boolean
+
wakeup-source:
type: boolean
--
2.43.0
