From: Utsav Agarwal <utsav.agarwal@xxxxxxxxxx> Updating dt bindings for adp5588. Since the device can now function in a purely gpio mode, the following keypad specific properties are now made optional: - interrupts - keypad,num-rows - keypad,num-columns - linux,keymap However the above properties are required to be specified when configuring the device as a keypad, dependencies have been added such that specifying either one would require the remaining as well. Note that interrupts are optional, but required when the device has been configured in keypad mode. Signed-off-by: Utsav Agarwal <utsav.agarwal@xxxxxxxxxx> --- .../devicetree/bindings/input/adi,adp5588.yaml | 45 +++++++++++++++++++--- 1 file changed, 40 insertions(+), 5 deletions(-) diff --git a/Documentation/devicetree/bindings/input/adi,adp5588.yaml b/Documentation/devicetree/bindings/input/adi,adp5588.yaml index 26ea66834ae2..ccb24b8b7566 100644 --- a/Documentation/devicetree/bindings/input/adi,adp5588.yaml +++ b/Documentation/devicetree/bindings/input/adi,adp5588.yaml @@ -49,7 +49,10 @@ properties: interrupt-controller: description: This property applies if either keypad,num-rows lower than 8 or - keypad,num-columns lower than 10. + keypad,num-columns lower than 10. This property is optional if + keypad,num-rows or keypad,num-columns are not specified since the + device then acts as gpio only, during which interrupts may or may + not be utilized. '#interrupt-cells': const: 2 @@ -65,13 +68,28 @@ properties: minItems: 1 maxItems: 2 + +dependencies: + keypad,num-rows: + - linux,keymap + - keypad,num-columns + keypad,num-columns: + - linux,keymap + - keypad,num-rows + linux,keymap: + - keypad,num-rows + - keypad,num-columns + +if: + required: + - linux,keymap +then: + required: + - interrupts + required: - compatible - reg - - interrupts - - keypad,num-rows - - keypad,num-columns - - linux,keymap unevaluatedProperties: false @@ -108,4 +126,21 @@ examples: >; }; }; + + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/input/input.h> + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + gpio@34 { + compatible = "adi,adp5588"; + reg = <0x34>; + + #gpio-cells = <2>; + gpio-controller; + }; + }; + ... -- 2.34.1