From: Utsav Agarwal <utsav.agarwal@xxxxxxxxxx>
Current state of the driver for the ADP5588/87 only allows partial
I/O to be used as GPIO. This support was previously present as a
separate gpio driver, which was dropped with the commit
5ddc896088b0 ("gpio: gpio-adp5588: drop the driver") since the
functionality was deemed to have been merged with adp5588-keys.
To restore this, keypad specific checks in the probe
function are relaxed if the following conditions are met:
1) "gpio-only" property has been specified for the node
2) No keypad rows/columns are specified
The "gpio-only" property is introduced to simplify usage since it
serves as a clear indication of the user's intention as opposed to being
inferred from the number of rows and columns specified. This
also adds simplicity for the accompanying dt binding update as well
as interpretation of the same.
In such a case, additional checks are also introduced to make sure
that keypad and pure GPIO operation are mutually exclusive by
checking for keypad specific properties (keypad,num-rows and
keypad,num-columns).
Signed-off-by: Utsav Agarwal <utsav.agarwal@xxxxxxxxxx>
---
drivers/input/keyboard/adp5588-keys.c | 33 +++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c
index 1b0279393df4..6bfe748797df 100644
--- a/drivers/input/keyboard/adp5588-keys.c
+++ b/drivers/input/keyboard/adp5588-keys.c
@@ -188,6 +188,7 @@ struct adp5588_kpad {
u32 cols;
u32 unlock_keys[2];
int nkeys_unlock;
+ bool gpio_only;
unsigned short keycode[ADP5588_KEYMAPSIZE];
unsigned char gpiomap[ADP5588_MAXGPIO];
struct gpio_chip gc;
@@ -647,6 +648,25 @@ static int adp5588_fw_parse(struct adp5588_kpad *kpad)
struct i2c_client *client = kpad->client;
int ret, i;
+ /*
+ * Check if the device is to be operated purely in GPIO mode. If
+ * so, confirm that no keypad rows or columns have been specified, since
+ * all GPINS should be configured as GPIO.
+ */
+ if (kpad->gpio_only) {
+ ret = device_property_present(&client->dev,
+ "keypad,num-rows");
+ if (ret)
+ return -EINVAL;
+
+ ret = device_property_present(&client->dev,
+ "keypad,num-columns");
+ if (ret)
+ return -EINVAL;
+
+ return 0;
+ }
+
ret = matrix_keypad_parse_properties(&client->dev, &kpad->rows,
&kpad->cols);
if (ret)
@@ -739,6 +759,7 @@ static int adp5588_probe(struct i2c_client *client)
kpad->client = client;
kpad->input = input;
+ kpad->gpio_only = device_property_present(&client->dev, "gpio-only");
error = adp5588_fw_parse(kpad);
if (error)
return error;
@@ -790,6 +811,11 @@ static int adp5588_probe(struct i2c_client *client)
if (error)
return error;
+ if (!client->irq && kpad->gpio_only) {
+ dev_info(&client->dev, "Rev.%d, started as GPIO only\n", revid);
+ return 0;
+ }
+
error = devm_request_threaded_irq(&client->dev, client->irq,
adp5588_hard_irq, adp5588_thread_irq,
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
@@ -800,6 +826,13 @@ static int adp5588_probe(struct i2c_client *client)
return error;
}
+
+ if (kpad->gpio_only) {
+ dev_info(&client->dev, "Rev.%d irq %d, started as GPIO only\n",
+ revid, client->irq);
+ return 0;
+ }
+
dev_info(&client->dev, "Rev.%d keypad, irq %d\n", revid, client->irq);
return 0;
}
--
2.34.1
