Convert EKTF2127 infrared touchscreen controller binding to DT schema
and add ektf2232 compatible.
Signed-off-by: Andreas Kemnade <andreas@xxxxxxxxxxxx>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
.../bindings/input/touchscreen/ektf2127.txt | 25 --------
.../input/touchscreen/elan,ektf2127.yaml | 57 +++++++++++++++++++
2 files changed, 57 insertions(+), 25 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/elan,ektf2127.yaml
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt b/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt
deleted file mode 100644
index c9f2c9f578e34..0000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-* Elan eKTF2127 I2C touchscreen controller
-
-Required properties:
- - compatible : "elan,ektf2127" or "elan,ektf2132"
- - reg : I2C slave address of the chip (0x40)
- - interrupts : interrupt specification for the ektf2127 interrupt
- - power-gpios : GPIO specification for the pin connected to the
- ektf2127's wake input. This needs to be driven high
- to take ektf2127 out of its low power state
-
-For additional optional properties see: touchscreen.txt
-
-Example:
-
-i2c@00000000 {
- ektf2127: touchscreen@15 {
- compatible = "elan,ektf2127";
- reg = <0x15>;
- interrupt-parent = <&pio>;
- interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>
- power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>;
- touchscreen-inverted-x;
- touchscreen-swapped-x-y;
- };
-};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/elan,ektf2127.yaml b/Documentation/devicetree/bindings/input/touchscreen/elan,ektf2127.yaml
new file mode 100644
index 0000000000000..5c4c29da0b11d
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/elan,ektf2127.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/elan,ektf2127.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Elan eKTF2127 I2C touchscreen controller
+
+maintainers:
+ - Siebren Vroegindeweij <siebren.vroegindeweij@xxxxxxxxxxx>
+
+allOf:
+ - $ref: touchscreen.yaml#
+
+properties:
+ compatible:
+ enum:
+ - elan,ektf2127
+ - elan,ektf2132
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ power-gpios:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - power-gpios
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchscreen@15 {
+ compatible = "elan,ektf2127";
+ reg = <0x15>;
+ interrupt-parent = <&pio>;
+ interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>;
+ power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>;
+ touchscreen-inverted-x;
+ touchscreen-swapped-x-y;
+ };
+ };
+...
--
2.39.2
