On Wed, 05 Jun 2024 18:12:44 -0500, Danny Kaehn wrote: > This is a USB HID device which includes an I2C controller and 8 GPIO pins. > > The binding allows describing the chip's gpio and i2c controller in DT > using the subnodes named "gpio" and "i2c", respectively. This is > intended to be used in configurations where the CP2112 is permanently > connected in hardware. > > Signed-off-by: Danny Kaehn <danny.kaehn@xxxxxxxxxx> > --- > .../devicetree/bindings/i2c/silabs,cp2112.yaml | 105 +++++++++++++++++++++ > 1 file changed, 105 insertions(+) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: Error: Documentation/devicetree/bindings/i2c/silabs,cp2112.example.dts:41.13-29 Properties must precede subnodes FATAL ERROR: Unable to parse input tree make[2]: *** [scripts/Makefile.lib:427: Documentation/devicetree/bindings/i2c/silabs,cp2112.example.dtb] Error 1 make[2]: *** Waiting for unfinished jobs.... make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1430: dt_binding_check] Error 2 make: *** [Makefile:240: __sub-make] Error 2 doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240605-cp2112-dt-v11-1-d55f0f945a62@xxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
